Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation
Yıl: 2010 Cilt: 6 Sayı: 3 Sayfa Aralığı: 171 - 179 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022
Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation
Öz: T.Öz Yok
Anahtar Kelime: -
Öz: The extent of this work is operating characteristics of a horizontal shafted centrifugal pump (which has cast iron with lameller graphite wheel) which has been operated for 7 hours on the average. A closed circuit pump system (circulating within itself) which was formed by attaching a horizontal shafted centrifugal pump which can be used in irrigation applications with a drum has been operated for 150 hours at laboratory conditions. To define the operating properties of the pump, its operating characteristics were measured in respect to TS EN ISO 9906/AC. Furthermore, observations have been done to determine whether there is a connection between operating characteristics of the pump and the wear and corrosion occured on the wheel or not. When spectral analysis, micro-structure and hardness measurements of the wheel materials on which first and second experiments were conducted and unused wrought iron wheel materials were analysed, it has been observed that the wheel materials used in the experiments do not bear the properties required by wrought iron standards. According to the results of the observations carried out by electron microscope on micro-structure of wheels, wear, in addition to corrosion on the outer surface of wheels has been identified.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Anonim, 2004. Korozyon.Error! Hyperlink reference not valid., Access: February 2004
- Anonim, 2006. Presentation of cast-iron graphite micro structure. Turkish Standards Institute, 12s, Ankara.
- Anonim, 2007. Pompa, Error! Hyperlink reference not valid., Access, November 2007
- Anonim, 2008a. General Principles of* Corrosion, http:// www.angilfire.com/mt/mehmettamirci/korozyonl/ilkeler. htm, Access: October 2008
- Anonim, 2008b. Submersible Clean Water Pumps and Electric Motors, http://ebitt.com.tr/rn x _ sd_cs. html, Access: November 2008
- Arıkan, R., 2007. Saffil (5-AI203) Friction Abrasion Behaviors of Fiber Reinforced ZA-12 Composite, Gazi Üniversity Engineering Architecture Faculty Journal, 22:359-368.
- Ay, M., U. Çaydaş, A. Hasçalık, 2006. Observation of Adhesive Abrasion Behaviors of Fe-C-Mo-Fe Cr Composite Produced with Powder Metallurgy Method, Machine Technologies Electronic Journal, 3:25-31.
- Buytoz, S., H. Eren, 2007. The Effect of Reinforcing Elements on Abrasive Friction Performance of Al Metal Matrix Composites, F.U. Science and Engineering Journal, 19(2):209-216.
- Çetin, M., F. Gül, 2007. The Effect of Matrix Structure on Abrasion Corrosion of Global Graphite Cast-Iron and Pin Temperature on Dry Sliding Conditions, G.U. Engineering Architecture Faculty Journal, 22:273-280.
- Eker B., E. Yüksel, 2005. A study on Corrosion Prevention Methods in Agricultural Machinery, Machine Single Month Production and Technology Culture Journal, 10:102-108.
- Ertöz A. Ö., 2003. Energy Efficiency in Pumps, http://www.mmo.org.tr/resimler/ekler/04321478f4bc79e _ek.pdf, Access: 07.03.2010
- İşcan S., E. Tepeli, A. Uyan, M. Yaşar, A. Çavdar, 2004. Pumping in Irrigation Systems, s. 123. Basic Principles of Irrigation 1. Adana Agricultural Production Enterprise and Personnel Education Centre Publishing.
- Nalbantoğlu, B., 2001. Life-long Cost and System Efficiency of Pumps, 4th Pump Congress and Exhibition Announcement Book, 178-185.
- Yalçın, K., 1998. Volumetric Pumps. II. Section, s.105. Volumetric and Centrifugal Pumps. Çağlayan Bookstore.
- Yılmaz, S. S., B. S. Ünlü, R. Varol, 2005. Abrasion and Mechanical Features of Boronized iron Based FeCu-Graphite T/M Material, Machine Technologies Electronic Journal, 3:11-21.
- Yılmaz, S. S., B. S. Ünlü, R. Varol, 2007. The Effect of Boronizing and Shotpeen on the Fatigue Behavior of Iron based T/M Materials, Machine Technologies Electronic Journal, 1:61-68.
- Yüksel E., B. Eker, 2009. The Detection of Abrasion that would occur on the Stainless-Steel Pump wheels of Centrifuged Pumps used in Agricultural Irrigation, N.K.U. Agricultural Faculty Journal, 6(3):303-31.
APA | YÜKSEL E, EKER B (2010). Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. , 171 - 179. |
Chicago | YÜKSEL ELİF,EKER BÜLENT Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. (2010): 171 - 179. |
MLA | YÜKSEL ELİF,EKER BÜLENT Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. , 2010, ss.171 - 179. |
AMA | YÜKSEL E,EKER B Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. . 2010; 171 - 179. |
Vancouver | YÜKSEL E,EKER B Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. . 2010; 171 - 179. |
IEEE | YÜKSEL E,EKER B "Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation." , ss.171 - 179, 2010. |
ISNAD | YÜKSEL, ELİF - EKER, BÜLENT. "Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation". (2010), 171-179. |
APA | YÜKSEL E, EKER B (2010). Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. Tarım Makinaları Bilimi Dergisi, 6(3), 171 - 179. |
Chicago | YÜKSEL ELİF,EKER BÜLENT Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. Tarım Makinaları Bilimi Dergisi 6, no.3 (2010): 171 - 179. |
MLA | YÜKSEL ELİF,EKER BÜLENT Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. Tarım Makinaları Bilimi Dergisi, vol.6, no.3, 2010, ss.171 - 179. |
AMA | YÜKSEL E,EKER B Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. Tarım Makinaları Bilimi Dergisi. 2010; 6(3): 171 - 179. |
Vancouver | YÜKSEL E,EKER B Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation. Tarım Makinaları Bilimi Dergisi. 2010; 6(3): 171 - 179. |
IEEE | YÜKSEL E,EKER B "Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation." Tarım Makinaları Bilimi Dergisi, 6, ss.171 - 179, 2010. |
ISNAD | YÜKSEL, ELİF - EKER, BÜLENT. "Determination of wear that can be formed at the cast iron wheels of the centrifuge pumps used at agricultural irrigation". Tarım Makinaları Bilimi Dergisi 6/3 (2010), 171-179. |