Yıl: 2013 Cilt: 18 Sayı: 1 Sayfa Aralığı: 38 - 49 Metin Dili: İngilizce İndeks Tarihi: 29-07-2022

ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE

Öz:
In this paper, elasto-plastic stress analysis in laminated thermoplastic composite plates having an elliptic hole in the middle is examined by using finite element method. Composite plates consist of four orthotropic laminations and bonded symmetrically [?0/-?0]. Uniform loadings in vertical direction are applied to the selected composite plates. The loading and reinforcement angle are gradually increased from the yield point of the plate. The load steps increased as 0.0001 MPa at each iteration. Iteration numbers are chosen 25, 50, 75 and 100. A quarter of the plate is taken into consideration due to symmetry. Elasto-plastic stresses are obtained according to load steps and orientation angles.
Anahtar Kelime:

Konular: Matematik
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • 1. A. Yapıcı, S.Ö. Şahin, Elasto-Plastic Stress Analysis Becoming Between Hole-Edge of Fiber Reinforced Thermoplastic Laminated Composite Plates, Engineer-Machin, 2003.
  • 2. YA. Bahei-El-Din, G.J. Dvorak, Ş. Utku, Finite Elemet Analysis of Elasto-Plastic Composite Structures, Computers & Structures, 13, Issues 1-3, 321-330, 1981.
  • 3. N. Arslan, H. Pıhtılı, M. Gür, Elasto-Plastic Stres Analysis of Thermoplastic Matrix Composite Laminated and Perforated Plates Under in-Plane Loading, Journal of Reinforced Plastics and Composites, 20, 1222-1252, 2001.
  • 4. N. Arslan, M. Çelik, Prediction of the Elasto-Plastic Behavior of Thermoplastic Composite Laminated Plates ([00/0]2) With Square Hole, Composite Structures, 55, 37-49, 2002.
  • 5. M. Gür, M. O. Kaman, Elasto-Plastic Stres Analysis of Composite Plane Plate Having Rectangular Hole in Its Middle, Journal of Firat Univ. Natural and Engineering Science, 13, 2, 225 -236, 2001.
  • 6. R. Karakuzu, A. Özel, O. Sayman, Elasto-Plastic Finite Element Analysis of Metal Matrix Plates with Edge Notches, Computers & Structures, 63, 3, 551-558, 1997.
  • 7. R. Karakuzu, Z. Aslan, B. Okutan, The Effect of Plate Number, Orientation Angle and Bonding Type on Residual Stresses of Woven Steel Fiber Reinforced Thermoplastic Laminated Composite Plates Subjected to Transverse Uniform Load, Composites Science and Technology, 64, 1049-1056, 2004.
  • 8. O. Sayman, Elasto-Plastic Stress Analysis in Stainless Steel Fiber Reinforced Aluminum Metal Matrix Laminated Plates Loaded Transversely, Composite Structures, 43, 147-154, 1998.
  • 9. O. Sayman, S. Aksoy, Elasto-Plastic Stress Analysis of Simply Supported and Clamped Aluminum Metal-Matrix Laminated Plates with A Hole, Composite Structures, 53, 355-364, 2001.
  • 10. O. Sayman, H. Akbulut, C. Meriç, Elasto-Plastic Stress Analysis of Aluminum Metal-Matrix Composite Laminated Plates Under in-Plane Loading, Computers and Structures 75, 55-63, 2000.
  • 11. C. Ataş, O. Sayman, Elasto-Plastic Stres Analysis And Expansion of Plastic Zone in Clamped and Simply Supported Aluminum Metal-Matrix Laminated Plates, Composite Structures 49, 9 -19, 2000.
  • 12. R.M. Jones, Mechanics of Composite Materials, McGrawHill, Tokyo, 1975.
  • 13. KJ. Bathe, Finite Element Procedures in Engineering Analysis, Englewood Cliffs, NJ: Prentice-Hall, 1982.
  • 14. G. Örçen, M. Gür and M.,Y. Solmaz, The Plastic Stress Analysis at the Laminated Thermoplastic Composite Plates with Elliptic Hole, Journal of the Faculty of Engineering and Architecture of Gazi University 24, 667-674, 2009.
  • 15. CC. Lin, CS. Kuo, Buckling of Laminated Plates with Holes, Journal of Composite Materials, 23, 536-53,1989.
  • 16. FR. Gibson, Principles of Composite Material Mechanics, Newyork, McGraw-Hill, 1994.
  • 17. G. Örçen, Elastic and Elasto-Plastic Stress Analysis Reinforced Stainless Steel Thermoplastic Matrix Laminated Plate, Master Thesis, 2005.
APA ORÇEN G, GÜR M (2013). ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. , 38 - 49.
Chicago ORÇEN GURBET,GÜR MUSTAFA ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. (2013): 38 - 49.
MLA ORÇEN GURBET,GÜR MUSTAFA ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. , 2013, ss.38 - 49.
AMA ORÇEN G,GÜR M ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. . 2013; 38 - 49.
Vancouver ORÇEN G,GÜR M ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. . 2013; 38 - 49.
IEEE ORÇEN G,GÜR M "ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE." , ss.38 - 49, 2013.
ISNAD ORÇEN, GURBET - GÜR, MUSTAFA. "ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE". (2013), 38-49.
APA ORÇEN G, GÜR M (2013). ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. Mathematical and Computational Applications, 18(1), 38 - 49.
Chicago ORÇEN GURBET,GÜR MUSTAFA ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. Mathematical and Computational Applications 18, no.1 (2013): 38 - 49.
MLA ORÇEN GURBET,GÜR MUSTAFA ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. Mathematical and Computational Applications, vol.18, no.1, 2013, ss.38 - 49.
AMA ORÇEN G,GÜR M ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. Mathematical and Computational Applications. 2013; 18(1): 38 - 49.
Vancouver ORÇEN G,GÜR M ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE. Mathematical and Computational Applications. 2013; 18(1): 38 - 49.
IEEE ORÇEN G,GÜR M "ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE." Mathematical and Computational Applications, 18, ss.38 - 49, 2013.
ISNAD ORÇEN, GURBET - GÜR, MUSTAFA. "ELASTO-PLASTIC STRESS ANALYSIS IN LAMINATED THERMOPLASTIC COMPOSITE PLATES WITH AN ELLIPTIC HOLE". Mathematical and Computational Applications 18/1 (2013), 38-49.