(Yaşar University, Faculty of Business, Turkey)
Mehmet Cemali DİNÇER
(Yaşar University, Faculty of Engineering)
Yıl: 2018Cilt: 6Sayı: 1ISSN: 2147-4575 / 2147-4575Sayfa Aralığı: 104 - 111İngilizce

206 1
Throughput Analysis of Transfer Lines in Transient State: Using Exact Analytical Methods
Transfer line is a serial arrangement of machines where buffers are used to separate two consecutive machines. This special type of production systems have high production volumes. In the design and operation of transfer lines, throughput analysis is essential. Considering the transient state of the systems, this paper presents theoretical analysis for throughput rate of transfer lines. For the short transfer lines, having a unique machine and two machines, we derive throughput rate, expected value and variance functions. We use these functions in performance evaluation of production systems. Besides, these formulations can be used while analyzing longer transfer lines which can easily be decomposed into smaller sub-systems
Fen > Ziraat > Ziraat Mühendisliği
Fen > Temel Bilimler > Biyoloji Çeşitliliğinin Korunması
Fen > Temel Bilimler > Biyoloji
Fen > Temel Bilimler > Kimya, Analitik
Fen > Temel Bilimler > Kimya, Uygulamalı
Fen > Temel Bilimler > Kimya, İnorganik ve Nükleer
Fen > Temel Bilimler > Kimya, Tıbbi
Fen > Temel Bilimler > Kimya, Organik
Fen > Temel Bilimler > Fizikokimya
Fen > Temel Bilimler > Ekoloji
Fen > Temel Bilimler > Çevre Bilimleri
Fen > Temel Bilimler > Matematik
Fen > Temel Bilimler > Optik
Fen > Temel Bilimler > Fizik, Uygulamalı
Fen > Temel Bilimler > Fizik, Atomik ve Moleküler Kimya
Fen > Temel Bilimler > Fizik, Katı Hal
Fen > Temel Bilimler > Fizik, Akışkanlar ve Plazma
Fen > Temel Bilimler > Fizik, Matematik
Fen > Temel Bilimler > Fizik, Nükleer
Fen > Temel Bilimler > Fizik, Partiküller ve Alanlar
Fen > Temel Bilimler > İstatistik ve Olasılık
Fen > Temel Bilimler > Termodinamik
Fen > Temel Bilimler > Taşınım
Fen > Temel Bilimler > Su Kaynakları
Fen > Mühendislik > Mimarlık
Fen > Mühendislik > Bilgisayar Bilimleri, Yapay Zeka
Fen > Mühendislik > Bilgisayar Bilimleri, Sibernitik
Fen > Mühendislik > Bilgisayar Bilimleri, Donanım ve Mimari
Fen > Mühendislik > Bilgisayar Bilimleri, Bilgi Sistemleri
Fen > Mühendislik > Bilgisayar Bilimleri, Yazılım Mühendisliği
Fen > Mühendislik > Bilgisayar Bilimleri, Teori ve Metotlar
Fen > Mühendislik > İnşaat ve Yapı Teknolojisi
Fen > Mühendislik > Savunma Bilimleri
Fen > Mühendislik > Enerji ve Yakıtlar
Fen > Mühendislik > Mühendislik, Biyotıp
Fen > Mühendislik > Mühendislik, Kimya
Fen > Mühendislik > İnşaat Mühendisliği
Fen > Mühendislik > Mühendislik, Elektrik ve Elektronik
Fen > Mühendislik > Çevre Mühendisliği
Fen > Mühendislik > Mühendislik, Jeoloji
Fen > Mühendislik > Endüstri Mühendisliği
Fen > Mühendislik > İmalat Mühendisliği
Fen > Mühendislik > Mühendislik, Makine
Fen > Mühendislik > Gıda Bilimi ve Teknolojisi
Fen > Mühendislik > Jeokimya ve Jeofizik
Fen > Mühendislik > Jeoloji
Fen > Mühendislik > Yeşil, Sürdürülebilir Bilim ve Teknoloji
Fen > Mühendislik > Görüntüleme Bilimi ve Fotoğraf Teknolojisi
Fen > Mühendislik > Malzeme Bilimleri, Biyomalzemeler
Fen > Mühendislik > Malzeme Bilimleri, Seramik
Fen > Mühendislik > Malzeme Bilimleri, Özellik ve Test
Fen > Mühendislik > Malzeme Bilimleri, Kaplamalar ve Filmler
Fen > Mühendislik > Malzeme Bilimleri, Kompozitler
Fen > Mühendislik > Malzeme Bilimleri, Kâğıt ve Ahşap
Fen > Mühendislik > Malzeme Bilimleri, Tekstil
Fen > Mühendislik > Metalürji Mühendisliği
Fen > Mühendislik > Maden İşletme ve Cevher Hazırlama
Fen > Mühendislik > Nanobilim ve Nanoteknoloji
Fen > Mühendislik > Polimer Bilimi
Fen > Mühendislik > Robotik
Fen > Mühendislik > Telekomünikasyon
Fen > Mühendislik > Taşınım Bilimi ve Teknolojisi
DergiAraştırma MakalesiErişime Açık
  • Altiok, T. (1997) Performance analysis of manufacturing systems. New York: Springer Verlag
  • Amari, S.V., and Misra, R.B. (1997) “Closed-form expressions for distribution of sum of exponential random variables.” IEEE Transactions on Reliability, 46(4), 519-522
  • Bonvik, A.M., Dallery, Y., and Gershwin, S.B. (2000) “Approximate analysis of production systems operated by a CONWIP/finite buffer hybrid control policy” International Journal of Production Research, 38, 2845-2869
  • Buzacott, J.A., and Shanthikumar, J.G. (1993). Stochastic models of manufacturing systems. Englewood Cliffs, NJ: Prentice Hall
  • Borisovsky, P., Dolgui, A., and Kovalev, S. (2012) “Modeling transfer line design problem via a set partitioning problem.” Optimization Letters, 6, 915-926
  • Colledani, M. et al. (2010) “Analytical methods to support continous improvements at scania” International Journal of Production Research, 48(7), 1913-1945
  • Dallery, Y., David, R., and Xie, X.L. (1989) “Approximate analysis of transfer lines with unreliable macines and finite buffers” IEEE Transactions on Automatic Control, 34(9), 943-953
  • Dallery, Y., and Le Bihan, H. (1999) “An improved decomposition method for the analysis of production lines with unreliable machines and finite buffers” International Journal of Production Research, 37(5), 1093-1117
  • Dincer C., and Deler, B. (2000) “On the distribution of throughput of transfer lines” Journal of the Operational Reseacrh Society, 51, 1170-1178
  • Dolgui, A., Finel, B., Venadat, F., Guschinsky, N., and Levin, G. (2005) “A heuristic approach for transfer line balancing” Journal of Intelligent Manufacturing, 16, 159-172
  • Gershwin, S.B. (1987) “An efficient decomposition method fort he approximate evaluation of tandem queues with finite storage space and blocking” Operations Research, 35(2), 291-305
  • Gershwin, S.B. (1991) “Assembly/disassembly systems: an efficient decomposition algorithm for tree-structured networks” IIE Transactions, 23(4), 302-314
  • Gershwin, S.B., and Burman, M.H. (2000) “A decomposition method for analyzing inhomogenous assembly/disassembly systems” Annals of Operations Research, 93(1-4), 91-115
  • Gershwin, S.B., and Werner, L.M. (2007) “An approximate analytical method for evaluating the performance of closed-loop flow systems with unreliable machines and finite buffers.” International Journal of Production Research, 45(14), 3085-3111
  • Govil, M.C., and Fu, M.C. (1996) “Queueing theory in manufacturing: a survey.” Journal of Manufacturing Systems, 18, 214-240
  • Guschinskaya, O., and Dolgui, A., (2009) “Comparison of exact and heuristic methods for a transfer line balancing problem.” International Journal of Production Economics, 120, 276-286
  • Guschinskaya, O., and Dolgui, A., (2008) “A transfer line balancing problem by heuristic methods: Industrial case studies.” Decision Making in Manufacturing and Services, 2(1), 33-46
  • Guschinskaya, O., and Dolgui, A., Guschinski, N., and Levin, B. (2008) “A heuristic multi-start decomposition approach for optimal design of serial machining lines” European Journal of Operational Research, 189, 902-913
  • Hany, O., and Baki, M.F. (2014) “Balancing transfer lines using Benders decomposition and ant colony optimization techniques” International Journal of Production Research, 52(5), 1334-13350
  • Helber, S., and Jusic, H. (2004) “A new decomposition approach for non-cyclic continous material flow lines with a merging flow of material.” Annals of Operations Research, 125, 117-139
  • Helber, S. (1998) “Decomposition of unreliable assembly/disassembly networkswith limited buffer capacity and random processing times” European Journal of Operational Research, 109(1), 24-42
  • Ignall, E., and Silver, A. (1977) “The output of a two-stage system with unreliable machines and limited storage.” IIE Transactions, 9, 183-188
  • Li, J., Blumenfeld, D.E., and Alden, J.M. (2006) “Comparisons of two-machine line models in throughput analysis.” International Journal of Production Research, 44, 1375-1398
  • Li, J., Blumenfeld, D.E., Huang, N., and Alden, J.M. (2009) “Throughput analysis of production systems: recent advances and future topics.” International Journal of Production Research, 47(14), 3823-3851
  • Liu, X.G., and Buzacott J.A. (1990) “Approximate models of assembly systems with finite inventory banks.” European Journal of Operational Research, 45(2-3), 143-154
  • Masood, S. (2006) “Line balancing and simulation of an automated production transfer line.” Assembly Automation, 26(1), 69-74
  • Papadopoulus, H.T., and Heavey, C. (1996) “Queueing theory in manufacturing systems analysis and design: a classification of models for production and transfer lines.” European Journal of Operational Research, 92(1), 1-27
  • Wu, K., and McGinnis, L. (2012) “Performance evaluation for general queueing networks in manufacturing systems: Characterizing the trade-off between queue time and utilization.” European Journal of Operational Research, 221, 328-339
  • Xia, B., Xi, L., and Zhou, B. (2012) “An improved decomposition method for evaluating the performance of transfer lines with unreliable machines and finite buffers.” International Journal of Production Research, 50(15), 4009-4024

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © 2019 Tüm Hakları Saklıdır.