Delik delme prosesi: bir araştırma
Yıl: 2017 Cilt: 21 Sayı: 2 Sayfa Aralığı: 120 - 130 Metin Dili: Türkçe DOI: 10.16984/saufenbilder.296833 İndeks Tarihi: 05-03-2019
Delik delme prosesi: bir araştırma
Öz: Delik delme işlemi, talaşlı imalat işlemleri arasında önemli bir yere sahiptir. Delme işlemi esnasında, aşırı yüzeypürüzlülüğü, çapak oluşumu, dairesellik, eksenel kaçıklık ve hızlı takım aşınması gibi istenmeyen sonuçlarlakarşılaşılmaktadır. Bu sonuçlar, ürün kalitesinin ve üretim maliyetlerinin belirlenmesinde önemli bir etkiye sahiptir.Buna göre, makine parçalarının birbirleri arasında hassas çalışabilmeleri ve üretimde verimliliğin arttırılabilmesi içinistenmeyen bu sonuçların en aza indirgenmesi gerekmektedir. Kesme esnasında oluşan ilerleme kuvveti, moment,takım aşınması ve yüzey pürüzlülüğü, optimum kesme parametrelerinin belirlenmesi ile kontrol edilebilmektedir.Böylelikle, optimum kesme parametreleri belirlenerek, üretimde verimliliğin ve hassasiyetin arttırılmasısağlanmaktadır. Bu çalışmada, farklı malzemeler üzerinde delik delme işlemi ile ilgili yapılan çalışmalar araştırılarakelde edilen sonuçlar bir arada sunulmuştur.
Anahtar Kelime: Konular:
Drilling process: a review
Öz: Drilling has important role among all machining operations. In during drilling process such as excessive surface roughness, burr formation, ovality and axial deviation with adverse results have been encountered. These results have a significant influence in determining product quality and manufacturing costs. Hence, It is necessary to minimize these adverse results in order to work on each machine part precisely and to get an increased efficiency in production. Thrust force, torque, tool wear and surface roughness can be controlled by determining the optimum cutting parameters. Thereby, using these parameters increased efficiency and accuracy in production are provided. The investigated studies which are about drilling process on different materials are presented in this study.
Anahtar Kelime: Konular:
Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- Ö. Tekaslan, N. Gerger, ve U. Şeker, “AISI 304 östenitik paslanmaz çeliklerde kesme parametrelerine bağlı olarak yüzey pürüzlülüklerinin araştırılması”, BAÜ FBE Dergisi, 10(2), 3-12, 2008.
- G. Sur, H. Çetin, E. Çevik, H. Ahlatçı and Y. Sun, “Determining the Influence of Ti Additive on Surface Roughness During Turning of AA6063 Alloy”, 6th International Advanced Technologies Symposium(IATS’11), Elazığ, Turkey, 2011, pp.180-185.
- W.C. Chen, and C.C. Tsao, “Cutting performance of different coated twist drills”, Journal of Material Processing Technology, 88(1-3), 203- 207, 1999.
- H. Zhao, “Predictive models for forces, power and hole oversize in drilling operations”, Ph.D. thesis, University of Melbourne, Australia, 1994.
- H.L. Tonshoff, W. Spintig, and W. Konig, A. Neises, “Machining of Holes Developments in Drilling Technology”, Annals of the CIRP, 43(2), 551-560, 1994.
- R. Li, and A.J. Shih, “Finite element modeling of high-throughput drilling of Ti-6Al-4V”, Transactions of NAMRI/SME, 35, 73-80, 2007.
- T. Kıvak, “Kesici Takımlara Uygulanan Kriyojenik İşlemin Ti-6Al-4V Alaşımının Delinebilirliği Üzerindeki Etkilerinin Araştırılması”, Doktora Tezi, Gazi Üniversitesi Fen Bilimleri Enstitüsü, Ankara, 2012.
- M. Akkurt, “Talaş Kaldırma Yöntemleri ve Takım Tezgâhları”, Birsen Yayınevi, İstanbul, 1998, 23-90.
- S.A. Basile, “Modeling transverse motions of a drill bit for process understanding”, Precision Engineering, 15(4), 258-265, 1993.
- M.S. Roger, and V.L. Russell, “Experimental design for process settings in aircraft manufacturing. In: Statistical case studies: a collaboration between academe and industry”, Society for Industrial and Applied Mathematics, 235-247, 1998.
- M. Kurt, E. Bagci, and Y. Kaynak, “Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes”, International Journal of Advanced Manufacturing Technology, 40(5), 458-469, 2009.
- E. Kılıçkap, ve M. Hüseyinoğlu, “Tepki yüzey modeli ve genetik algoritma kullanılarak AISI 316’ nın delinmesinde oluşan çapak yüksekliğinin modellenmesi ve optimizasyonu”, Mühendislik Dergisi, 1(1), 71-80, 2010.
- P.F. Zhang, N.J. Churi, and Z.J. Pei, C. Treadwell, “Mechanical Drilling Processes for Titanium Alloys: A Literature Review”, Machining Science and Technology: An International Journal, 12(4), 417-444, 2008.
- K. Colligan, “New tool drills both titanium and carbon composites”, American Machinist, 138(10), 56-58, 1994.
- D. Kim, and M. Ramulu, “Cutting and drilling characteristics of hybrid titanium composite laminate(HTCL)”, In Proceedings of Materials and Processing Technologies for Revolutionary Applications Fall Technical Conference. Seattle, Washington, 2005, 1-8.
- B.K. Lambert, “Prediction of force, torque and burr length in drilling titanium-composite materials”, SME Technical Paper MR79-363, 1979.
- G. Meral, H. Dilipak, ve M. Sarıkaya, “AISI 1050 Malzemenin Delinmesinde Delme Parametrelerinin Delik Kalitesi Üzerindeki Etkisinin Çoklu Regresyon Metoduyla Modellenmesi”, Makine Teknolojileri Elektronik Dergisi, 8(1), 37-46, 2011.
- F. Mendi, “Takım tezgahları teori ve hesapları”, Gazi Kitabevi, Ankara, 1996, 5-40.
- X. Yang, and C.R. Liu, “Machining titanium and its alloys”, Machining Science and Technology, 3(1), 107-139, 1999.
- E.Q. Ezugwu, “Titanium alloys and their machinability-a review”, Journal of Materials Processing Technology, 68(3), 262-274, 1997.
- W. Konig, “Applied research on the machinability of titanium and its alloys”, In Proceedings of the Forty-Seventh Meeting of AGARD Structural and Materials Panel, Florence, 1979, 1-10.
- J.F. Kahles, M. Field, and D. Eylon, F.H. Froes, “Machining of titanium alloys”, Journal of Metals, 37(4), 27-35, 1985.
- Anonymous(2006) Specific cutting force. Available: http://aluminium.matter.org.uk/content/html/eng/ default.asp?catid=129&pageid=2144416344.
- R.A. Williams. “A study of the drilling process”, Journal of Engineering for Industry, 96(4), 1207- 1215, 1974.
- L.B. Zhang, L.J. Wang, X.Y. Liu, H.W. Zhao, X. Wang, H.Y. Luo, “Mechanical model for predicting thrust and torque in vibration drilling fibre-reinforced composite materials”, International Journal of Machine Tools and Manufacture, 41(5), 641-657, 2001.
- L.P. Wang, L.J. Wang, Y.H. He, Z.J. Yang, “Prediction and computer simulation of dynamic thrust and torque in vibration drilling”, Proceedings Institution of Mechanical Engineers(Part B) Journal of Engineering Manufacture, 212(6), 489-497, 1998.
- L.P. Wang, J.S. Wang, and P.Q. Ye, L.J. Wang, “A theoretical and experimental investigation of thrust and torque in vibration microdrilling”, Proceedings Institution of Mechanical Engineers(Part B) Journal of Engineering Manufacture, 215(11), 1539-1548, 2001.
- G.L. Coz. M. Marinescu, and A. Devillez, D. Dudzinski, L. Velnom, “Measuring temperature of rotating cutting tools: Application to MQL drilling and dry milling of aerospace alloys”, Applied Thermal Engineering, 36(1), 434-441, 2012.
- R.P. Zeilmann, and W.L. Weingaertner, “Analysis of temperature during drilling of TiAl4V with minimal quantity of lubricant”, Journal of Materials Processing Technology, 179,(1-3), 124-127, 2006.
- C.C. Tsao, and H. Hocheng, “Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network”, Journal of Materials Processing and Technology, 203(1-3), 342-348, 2008.
- A.I.S. Antonialli, A.E. Diniz, and R. Pederiva, “Vibration analysis of cutting force in titanium alloy milling”, International Journal of Machine Tools & Manufacture, 50(1), 65-74, 2010.
- V.P. Astakhov, “Effects of the cutting feed, depth of cut, and workpiece(bore) diameter on the tool wear rate”, International Journal of Advanced Manufacturing Technology, 34(7-8), 631-640, 2007.
- I. Korkut, K. Yavuz, and Y. Turgut, “An experimental investigation into the machinability of GGG-70 grade spheroidal graphite cast iron”, Indian Journal of Engineering & Materials Sciences, 16(2), 116-122, 2009.
- T. Rajmohan, and K. Palanikumar, “Optimization of Machining Parameters for Surface Roughness and Burr Height in Drilling Hybrid Composites”, Materials and Manufacturing Processes, 27(3), 320-328, 2012.
- H. Hocheng, and H. Puw, “On drilling characteristics of fibre-reinforced thermoset and thermoplastics”, International Journal of Machine Tools and Manufacture, 32(4), 583–592, 1992.
- W. Chen, “Some experimental investigations in the drilling of carbon fibre-reinforced plastic(CFRP) composite laminates”, International Journal of Machine Tools and Manufacture, 37(8), 1097-1108, 1997.
- P.K.R. Rao, and M.S. Shunmugam, “Accuracy and surface finish in BTA drilling”, International Journal of Production Research, 25(1), 31-44, 1987.
- P.K.R. Rao, and M.S. Shunmugam, “Wear studies in boring trepanning association drilling”, Wear, 124(1), 33-43, 1988.
- ] P.K.R. Rao, and M.S. Shunmugam, “Investigation: stress in boring trepanning association machining”, Wear, 119(1), 89-100, 1987.
- M.M. EI-Khabeery, S.M. Saleh, and M.R. Ramadan, “Some observations of surface integrity of deep drilling holes”, Wear, 142(2), 331-349, 1991.
- C.S. Deng, and J.H. Chin, “Hole roundness in deep-hole drilling as analyzed by Taguchi methods”, International Journal of Advanced Manufacturing Technology, 25(5), 420-426, 2005.
- S.S. Panda, and S.S. Mahapatra, “Parametric optimisation of multiresponse drilling process using grey based Taguchi methods”, AIMS Int. Conf, Noida, New Delhi, 2008, 1-4.
- J. Koelsch, “Divining edge quality by reading the burrs”, Quality Magazine, 40(13), 24-28, 2001.
- V.N. Gaitonde, S.R. Karnik, B.T. Achyutha, B. Siddeswarappa, “Taguchi approach with multiple performance characteristics for burrs size minimization in drilling”, Journal Scientific &Industrial Research, 65(12), 977-981, 2006.
- R. Jeyapaul, P. Shahabudeen, K. Krishnaiah, “Quality management research by considering multi-response problems in the Taguchi method-a review”, International Journal of Advanced Manufacturing Technology, 26(11), 1331-1337, 2005.
- V.N. Gaitonde, S.R. Karnik, B.T. Achyutha, B. Siddeswarappa, “Taguchi optimization in drilling of AISI 316L stainless steel to minimize burr size using multi-performance objective based on membership function”, Journal of Materials Processing Technology, 202(1-3), 374-379, 2008.
- S.L. Ko, J.E. Chang, and G.E. Yang, “Burr minimizing scheme in drilling”, Journal of Materials Processing Technology, 140(1-3), 237- 242, 2003.
- S.L. Ko, and J.K. Lee, “Analysis on burr formation in drilling with new concept drill”, Journal of Materials Processing Technology, 113(1-3), 392-398, 2001.
- H. Wada, and K. Yoshida, “Burrless drilling of metals”, Journal of the Japan Society for Precision Engineering, 66(7), 1109-1114, 2000.
- B. Pena, G. Aramendi, A. Rivero, L.N.L. Lacalle, “Monitoring of drilling for burr detection using spindle torque”, International Journal of Machine Tools&Manufacture, 45(14), 1614-1621, 2005.
- A. Çiçek, T. Kıvak, E. Ekici, “Optimization of drilling parameters using Taguchi technique and response surface methodology(RSM) in drilling of AISI 304 steel with cryogenically treated HSS drills”, Journal of Intelligent Manufacturing, 26(2), 295-305, 2015.
- R.P. Zeilmann, G.L. Nicola, T. Vacaro, C.R. Teixeira, R. Heiler, “Implications of the reduction of cutting fluid in drilling AISI P20 steel with carbide tools”, International Journal of Advanced Manufacturing Technology, 58(5), 431-441, 2012.
- T. Kıvak, K. Habalı, U. Şeker, “Inconel 718’in Delinmesinde Kesme Parametrelerinin Yüzey Pürüzlülüğü ve Talaş Oluşumu Üzerindeki Etkisinin Araştırılması”, Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, 25(2), 293-298, 2010.
- T.V. Rajamurugan, K. Shanmugam, S. Rajakumar, K. Palanikumar, “Modelling and analysis of thrust Force in drilling of GFRP Composites using Response Surface Methodology(RSM)”, Procedia Engineering, 38, 3757-3768, 2012.
- H. Hocheng, H. Puw, “On drilling characteristics of fibre-reinforced thermoset and thermoplastics”, International Journal of Machine Tools&Manufacture, 32(4), 583-92, 1992.
- H. Hocheng, H. Puw, K. Yao, “Experimental aspects of drilling of some fibre reinforced plastics” In: Proceedings of the machining of composite materials symposium, Chicago Illinois: ASM Materials week, 1992, 127-38.
- W. Chen, “Some experimental investigations in the drilling of carbon fibre-reinforced plastic(CFRP) composite laminates”, International Journal of Machine Tools&Manufacture, 37(8), 1097-108, 1997.
- W. Koenig, C. Wulf, P. Grass, H. Willerscheid, “Machining of fiber reinforced plastics”, Manufacturing Technology-CIRP Annals, 34(2), 537-548, 1985.
- J.A. Miller, “Drilling graphite/epoxy at Lockheed”, Am Mach Autom. Manufact 131(10), 70-71, 1987.
- R. Zitoune, V. Krishnaraj, F. Collombet, “Study of drilling of composite material and aluminium stack”, Composite Structures, 92(5), 1246-1255, 2010.
- V. Franke, “Drilling of long fiber reinforced thermoplastics-influence of the cutting edge on the machining results”, CIRP AnnalsManufacturing Technology, 60(1), 65-68, 2011.
- J.P. Davim, P. Reis, C.C. António, “Drilling fiber reinforced plastics(FRPs) manufactured by hand lay-up: influence of matrix(Viapal VUP 9731 and ATLAC 382-05)”, Journal of Materials Processing Technology, 155(1), 1828-1833, 2004.
- F.W. Taylor, “On the Art of Cutting Metals”, American Society of Mechanical Engineers, New York, 1907.
- S.S. Gill, R. Singh, H. Singh, “Wear behaviour of cryogenically treated tungsten carbide inserts under dry and wet turning conditions”, International Journal of Machine Tools & Manufacture, 49(3-4), 256-260, 2009.
- A. Moufki, A. Molinari, D. Dudzinski, “Modelling of orthogonal cutting with a temperature dependent friction law”, Journal of the Mechanics and Physics of Solids, 46(10), 2103-2138, 1998.
- M. Nouari, G. List, F. Girot, D. Gehin, “Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys”, International Journal of Machine Tools & Manufacture 45(12-13), 1436-1442, 2005.
- S.C. Lin, C.J. Ting, “Tool wear monitoring in drilling using force signals”, Wear 180(1-2), 53- 60, 1995.
- T. Aized, M. Amjad, “Quality improvement of deep-hole drilling process of AISI D2”, International Journal of Advancad Manufacturing Technology, 69(9), 2493-2503, 2013.
- S. Sharif, E.A. Rahim, “Performance of coatedand uncoated-carbide tools when drilling titanium alloy Ti-6Al-4V”, Journal of Materials Processing Technology, 185(1-3), 72-76, 2007.
- A.R.C. Sharman, A. Amarasinghe, K. Ridgway, “Tool life and surface integrity aspects when drilling and hole making in Inconel 718”, Journal of Materials Processing Technology, 200(1-3), 424-432, 2008.
- Y.C. Chen, Y.S. Liao, “Study on wear mechanisms in drilling Inconel 718 superalloy”, Journal of Materials Processing Technology, 140(1-3), 269-273, 2003.
- J.L. Cantero, M.M. Tardio, J.A. Canteli, M. Marcos, M.H. Miguelez, “Dry drilling of alloy Ti6Al-4V”, International Journal of Machine Tools&Manufacture, 45(11), 1246-1255, 2005.
- E.O. Ezugwu, C.J. Lai, “Failure modes and wear mechanisms of M35 high-speed drills when machining inconel 901”, Journal of Materials Processing Technology, 49(3-4), 295-312, 1995.
- C. Sanjay, M.L. Neema, C.W. Chin, “Modeling of tool wear in drilling by statistical analysis and artificial neural network”, Journal of Materials Processing Technology, 170(3), 494-500, 2005.
- R. Li, P. Hegde, A.J. Shih, “High-throughput drilling of titanium alloys”, International Journal of Machine Tools & Manufacture, 47(1), 63-74, 2007.
- T. Matsumura, T. Obikawa, “On the development of expert system for selecting the optimum cutting condition”, Journal of the Japan Society for Precision Engineering, 58(10), 1691-1696, 1992.
- T. Teshima, T. Shibasaka, M. Takuma, A. Yamamoto, K. Iwata, “Estimation of cutting tool life by processing tool image data with neural network”, CIRP Annals-Manufacturing Technology, 42(1), 59-62, 1993.
- M.L. Neema, P.C. Pande, “The effect of magnetization on the wear of HSS steel tools”, Wear, 59(2), 355-362, 1980.
| APA | BAYRAKTAR Ş, SİYAMBAŞ Y, Turgut Y (2017). Delik delme prosesi: bir araştırma. , 120 - 130. 10.16984/saufenbilder.296833 |
| Chicago | BAYRAKTAR Şenol,SİYAMBAŞ YUSUF,Turgut Yakup Delik delme prosesi: bir araştırma. (2017): 120 - 130. 10.16984/saufenbilder.296833 |
| MLA | BAYRAKTAR Şenol,SİYAMBAŞ YUSUF,Turgut Yakup Delik delme prosesi: bir araştırma. , 2017, ss.120 - 130. 10.16984/saufenbilder.296833 |
| AMA | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y Delik delme prosesi: bir araştırma. . 2017; 120 - 130. 10.16984/saufenbilder.296833 |
| Vancouver | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y Delik delme prosesi: bir araştırma. . 2017; 120 - 130. 10.16984/saufenbilder.296833 |
| IEEE | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y "Delik delme prosesi: bir araştırma." , ss.120 - 130, 2017. 10.16984/saufenbilder.296833 |
| ISNAD | BAYRAKTAR, Şenol vd. "Delik delme prosesi: bir araştırma". (2017), 120-130. https://doi.org/10.16984/saufenbilder.296833 |
| APA | BAYRAKTAR Ş, SİYAMBAŞ Y, Turgut Y (2017). Delik delme prosesi: bir araştırma. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 21(2), 120 - 130. 10.16984/saufenbilder.296833 |
| Chicago | BAYRAKTAR Şenol,SİYAMBAŞ YUSUF,Turgut Yakup Delik delme prosesi: bir araştırma. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21, no.2 (2017): 120 - 130. 10.16984/saufenbilder.296833 |
| MLA | BAYRAKTAR Şenol,SİYAMBAŞ YUSUF,Turgut Yakup Delik delme prosesi: bir araştırma. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, vol.21, no.2, 2017, ss.120 - 130. 10.16984/saufenbilder.296833 |
| AMA | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y Delik delme prosesi: bir araştırma. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2017; 21(2): 120 - 130. 10.16984/saufenbilder.296833 |
| Vancouver | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y Delik delme prosesi: bir araştırma. Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi. 2017; 21(2): 120 - 130. 10.16984/saufenbilder.296833 |
| IEEE | BAYRAKTAR Ş,SİYAMBAŞ Y,Turgut Y "Delik delme prosesi: bir araştırma." Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 21, ss.120 - 130, 2017. 10.16984/saufenbilder.296833 |
| ISNAD | BAYRAKTAR, Şenol vd. "Delik delme prosesi: bir araştırma". Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi 21/2 (2017), 120-130. https://doi.org/10.16984/saufenbilder.296833 |
