Yıl: 2018 Cilt: 0 Sayı: 14 Sayfa Aralığı: 164 - 168 Metin Dili: İngilizce DOI: 10.31590/ejosat.457388 İndeks Tarihi: 12-09-2019

Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach

Öz:
This paper investigates efficiency of micro-textured cutting tools in dry orthogonal turning of Ti6Al4V alloy using 2D numericalanalysis. For this purpose, micro-grooves at different sizes were generated on rake face of cutting tools. Then, orthogonal cuttingsimulations were conducted using different tool rake angle values. Contact length at tool-chip interface, cutting force and force ratioresults were evaluated focusing on performance of micro grooves. The aim was to improve process efficiency and minimize negativeenvironmental impacts by contributing knowledge in development of textured cutting tools. The simulation results revealed thatdecreased forces, force ratio and contact length is possible with use of textured cutting tools. However, improper selection of texture parameters may cause adverse effects such as increased friction. Accordingly, efficiency of micro-grooves relies on both, groove size and rake angle.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Hong, S.Y., I. Markus, and W.-c. Jeong, New cooling approach and tool life improvement in cryogenic machining of titanium alloy Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 2001. 41(15): p. 2245-2260.
  • Arrazola, P.-J., et al., Machinability of titanium alloys (Ti6Al4V and Ti555. 3). Journal of materials processing technology, 2009. 209(5): p. 2223-2230.
  • Ezugwu, E.O. and Z.M. Wang, Titanium alloys and their machinability—a review. Journal of Materials Processing Technology, 1997. 68(3): p. 262-274.
  • Su, Y., et al., Cutting performance of micro-textured polycrystalline diamond tool in dry cutting. Journal of Manufacturing Processes, 2017. 27: p. 1-7.
  • Arulkirubakaran, D., V. Senthilkumar, and V. Kumawat, Effect of micro-textured tools on machining of Ti–6Al–4V alloy: an experimental and numerical approach. International Journal of Refractory Metals and Hard Materials, 2016. 54: p. 165-177.
  • Obikawa, T., et al., Micro-texture at the coated tool face for high performance cutting. International Journal of Machine Tools and Manufacture, 2011. 51(12): p. 966-972.
  • Xing, Y., et al., Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel. International Journal of Refractory Metals and Hard Materials, 2014. 43: p. 46-58.
  • Ma, J., et al., FEM assessment of performance of microhole textured cutting tool in dry machining of Ti-6Al-4V. The International Journal of Advanced Manufacturing Technology, 2016. 84(9-12): p. 2609-2621.
  • Deform-2D, Version 11 User Manual. STFC, Columbus, Ohio State, USA, 2014.
  • Johnson, G.R. and W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures. Engineering fracture mechanics, 1985. 21(1): p. 31-48.
  • Lee, W.-S. and C.-F. Lin, High-temperature deformation behaviour of Ti6Al4V alloy evaluated by high strain-rate compression tests. Journal of Materials Processing Technology, 1998. 75(1-3): p. 127-136.
  • Kawasegi, N., et al., Development of cutting tools with microscale and nanoscale textures to improve frictional behavior. Precision Engineering, 2009. 33(3): p. 248-254.
  • Özel, T., et al., Investigations on the effects of multi-layered coated inserts in machining Ti–6Al–4V alloy with experiments and finite element simulations. CIRP Annals, 2010. 59(1): p. 77- 82.
  • Kaya, E., F. Çakır, and Y. Özdemir, Investigations on the orthogonal cutting behavior of Ti6AL4V with micro-textured tool geometries using finite element method in International Conference on Mechanical and Aerospace Engineering. 2017: MA, USA. p. 8-12.
  • Chen, Z.M., et al. A simulation study on the effect of microtextured tools during orthogonal cutting of titanium alloy Ti-6Al4V. in Applied Mechanics and Materials. 2013. Trans Tech Publ.
  • Choudhury, S.K. and K.K. Kishore, Tool wear measurement in turning using force ratio. International Journal of Machine Tools and Manufacture, 2000. 40(6): p. 899-909.
  • Devillez, A., et al., Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools. Wear, 2007. 262(7): p. 931-942.
  • Shaw, M.C. and J. Cookson, Metal cutting principles. 1984: Clarendon press Oxford.
  • Ma, J., N.H. Duong, and S. Lei, 3D numerical investigation of the performance of microgroove textured cutting tool in dry machining of Ti-6Al-4V. The international journal of advanced manufacturing technology, 2015. 79(5-8): p. 1313-1323.
APA KAYA E, kaya i (2018). Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. , 164 - 168. 10.31590/ejosat.457388
Chicago KAYA Eren,kaya irfan Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. (2018): 164 - 168. 10.31590/ejosat.457388
MLA KAYA Eren,kaya irfan Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. , 2018, ss.164 - 168. 10.31590/ejosat.457388
AMA KAYA E,kaya i Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. . 2018; 164 - 168. 10.31590/ejosat.457388
Vancouver KAYA E,kaya i Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. . 2018; 164 - 168. 10.31590/ejosat.457388
IEEE KAYA E,kaya i "Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach." , ss.164 - 168, 2018. 10.31590/ejosat.457388
ISNAD KAYA, Eren - kaya, irfan. "Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach". (2018), 164-168. https://doi.org/10.31590/ejosat.457388
APA KAYA E, kaya i (2018). Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. Avrupa Bilim ve Teknoloji Dergisi, 0(14), 164 - 168. 10.31590/ejosat.457388
Chicago KAYA Eren,kaya irfan Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. Avrupa Bilim ve Teknoloji Dergisi 0, no.14 (2018): 164 - 168. 10.31590/ejosat.457388
MLA KAYA Eren,kaya irfan Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. Avrupa Bilim ve Teknoloji Dergisi, vol.0, no.14, 2018, ss.164 - 168. 10.31590/ejosat.457388
AMA KAYA E,kaya i Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. Avrupa Bilim ve Teknoloji Dergisi. 2018; 0(14): 164 - 168. 10.31590/ejosat.457388
Vancouver KAYA E,kaya i Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach. Avrupa Bilim ve Teknoloji Dergisi. 2018; 0(14): 164 - 168. 10.31590/ejosat.457388
IEEE KAYA E,kaya i "Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach." Avrupa Bilim ve Teknoloji Dergisi, 0, ss.164 - 168, 2018. 10.31590/ejosat.457388
ISNAD KAYA, Eren - kaya, irfan. "Efficiency investigations of textured cutting tools in orthogonal cutting of Ti6Al4V alloy: a numerical approach". Avrupa Bilim ve Teknoloji Dergisi 14 (2018), 164-168. https://doi.org/10.31590/ejosat.457388