Yıl: 2018 Cilt: 7 Sayı: 1 Sayfa Aralığı: 224 - 236 Metin Dili: Türkçe DOI: 10.28948/ngumuh.386621 İndeks Tarihi: 24-09-2019

YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ

Öz:
Granüler malzemeler dolgular, istinat duvarları, yol temelleri ve demir yolu balastı gibi inşaat mühendisliğiuygulamalarında sıkça kullanılmaktadır. Ancak gün geçtikçe artan doğal kaynakların azalması ve madencilikleilgili düzenlenen çevresel yönetmelikler, doğal kayaların ekonomik ve kolay çıkarılmasını daha dazorlaştırmaktadır. Bu durum ülkeleri doğal agregaya alternatif malzeme arayışına itmiştir. Bu çalışmada kentseldönüşüm projesi kapsamında depreme dayanıksız olduğu belirlenen yapıdan alınan yıkıntı atıklarının birtakımişlemlerden geçirilerek geri dönüşümü yapılmıştır. Daha sonra laboratuvar deneyleri ile bu atıkların fiziksel vemekanik özellikleri belirlenerek karayolu dolgularında kullanılabilmesi durumu incelenmiştir. Elde edilensonuçlar farklı ülkelerde yapılan çalışmalar ile karşılaştırılarak ülkemizdeki yıkıntı atıklarının dünyadaki yıkıntıatıklarına benzerlikleri araştırılmıştır. Çalışma sonucunda ülkemizdeki binalardan elde edilen yapım ve yıkımatıklarının geri dönüştürülerek karayolu dolgularında kullanılmasına engel bir sonuç ile karşılaşılmamıştır.
Anahtar Kelime:

INVESTIGATION OF THE USABILITY OF CONSTRUCTION AND DEMOLITION WASTES IN ROAD BASES

Öz:
Granular materials are commonly used in civil engineering applications like embankments, retaining walls, road bases and railway ballast. However, the availability of areas where natural rock can easily and economically be mined is becoming more difficult depending previous depletion of resources and environmental regulations associated with mining. This situation has pushed searching alternative materials to virgin aggregate of contractors. In this study, construction and demolition wastes taken from a structure that have low endurance against earthquake were subjected to some process and recycled. Then, its suitability of physical and mechanical properties for using as a filling material in base/subbase layer of road was investigated by laboratory tests. The results were compared with studies from different countries to examine the similarity of the wastes in Turkey. Finally, as it is seen, the waste material in Turkey has potential for using in base/subbase course of roads.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • ARULRAJAH, A., PIRATHEEPAN, J., ATHEESAN, T., BO, M.W., “Geotechnical Properties of Recycled Crushed Brick in Pavement Applications”, Journal of Materials in Civil Engineering, 23(10), 1444–1452, 2011.
  • VIERIA, C.S., PEREIRA P.M., “Use of Recycled Construction and Demolition Materials in Geotechnical Applications: A Review Resources”, Conservation and Recycling, 103, 192–204, 2015b.
  • ARULRAJAH, A., PIRATHEEPAN, J., DISFANI M.M., BO M.W., “Geotechnical and Geoenvironmental Properties of Recycled Construction and Demolition Materials in Pavement Subbase Applications”, Journal of Materials in Civil Engineering, 25(8), 1077-1088, 2013a.
  • RAHMAN, M.A., ARULRAJAH, A., PIRATHEEPAN, J., BO, M.W., IMETEAZ M.A., “Resilient Modulus and Permanent Deformation Responses of Geogrid-Reinforced Construction and Demolition Materials”, Journal of Materials in Civil Engineering, 26(3), 512-519, 2014.
  • RAHMAN, M.A., IMTEAZ, M.A., ARULRAJAH, A., PIRATHEEPAN, J., DISFANI, M.M., “Recycled Construction and Demolition Materials in Permeable Pavement Systems: Geotechnical and Hydraulic Characteristics”, Journal of Cleaner Production, 90, 183–94, 2015.
  • JIMENEZ, J.R., AYUSO, J., AGRELA, F., LOPEZ, M., GALVIN, A.P., “Utilisation of Unbound Recycled Aggregates From Selected CDW in Unpaved Rural Roads”, Resources, Conservation and Recycling, 58, 88– 97, 2012.
  • O’MAHONY, M.M., MILLIGAN, G.W.E., “Use of Recycled Materials in Subbase Layers”, Transp. Res. Rec. 1310, 73–80, 1991.
  • BENNERT, T., PAPP, W., MAHER, A., GUCUNSKI, N., “Utilization of Construction and Demolition Debris under Traffic-Type Loading in Base and Subbase Applications Transport”, Res. Rec.: J. Transp. Res. Board, 1714, 33–39, 2000.
  • CHINI, A., KUO, S., ARMAGHANI, J., DUXBURY, J., “Test of Recycled Concrete Aggregate in Accelerated Test Track”, Journal of Transportation Engineering, 127, 486–492, 2001.
  • NATAATMADJA, A., TAN, Y., “Resilient Response of Recycled Concrete Road Aggregates”, Journal of Transportation Engineering, 127, 450–453, 2001.
  • MOLENAAR, A., VAN NIEKERK, A., “Effects of Gradation, Composition, and Degree of Compaction on the Mechanical Characteristics of Recycled Unbound Materials”, Transp. Res. Rec.: J. Transp. Res. Board 1787, 73–82, 2002.
  • SIVAKUMAR, V., MC KINLEY, J.D., FERGUSON, D., “Reuse of Construction Waste: Performance Under Repeated Loading”, Proceedings of ICE - Geotechnical Engineering, 157(2), 91–96, 2004.
  • POON, C.S., CHAN, D., “Feasible Use of Recycled Concrete Aggregates and Crushed Clay Brick as Unbound Road Sub-base”, Construction and Building Materials, 20, 578–585, 2006.
  • SANTOS, E.C.G., VILAR, O.M., “Use of Recycled Construction and Demolition Wastes (RCDW) as Backfill of Reinforced Soil Structures”, In: Proceedings of the Fourth European Geosynthetics Conference, EUROGEO 4, Paper No. 1992008, Edinburg, Scotland, 2008.
  • LEITE, F.C., MOTTA, R.S., VASCONCELOS, K.L., BERMUCCI, L., “Laboratory Evaluation of Recycled Construction and Demolition Waste for Pavements”, Construction and Building Materials, 25, 2972–2979, 2011.
  • GABR A R., CAMERON, D.A., “Properties of Recycled Concrete Aggregate for Unbound Pavement Construction”, Journal of Materials in Civil Engineering, 24(6), 754-764, 2012.
  • BARBUDO, A., AGRELA, F., AYUSO, J., JIMENEZ, J.R., POON, C.S., “Statistical Analysis of Recycled Aggregates Derived from Different Sources for Sub-base Applications”, Construction and Building Materials, 28, 129–138, 2012.
  • CERNI G., CARDONE F., BOCCI M., “Permanent Deformation Behaviour of Unbound Recycled Mixtures”, Construction and Building Materials, 37, 573-580, 2012.
  • ARULRAJAH, A., RAHMAN, M.A., PIRATHEEPAN, J., BO, M.W., IMTEAZ, M.A., “Interface Shear Strength Testing of Geogrid-Reinforced Construction and Demolition Materials”, Advances in Civil Engineering Materials, 2(1), 189–200, 2013b.
  • ARULRAJAH, A., RAHMAN, M.A., PIRATHEEPAN, J., BO, M.W., IMTEAZ, M.A., “Evaluation of Interface Shear Strength Properties of Geogrid-Reinforced Construction and Demolition Materials Using a Modified Large Scale Direct Shear Testing Apparatus”, Journal of Materials in Civil Engineering, 26, 974– 982, 2014b.
  • ARULRAJAH, A., DISFANI M.M., HORPIBULSUK, S., SUKSIRIPATTANAPONG, C., PRONGMANEE N., “Physical Properties and Shear Strength Responses of Recycled Construction and Demolition Materials in Unbound Pavement Base/subbase Applications”, Construction and Building Materials, 58, 245–257, 2014c.
  • DISFANI, M. M., ARULRAJAH, A., BO, M. W., HANKOUR, R., “Recycled Crushed Glass in Road Work Applications”, Waste Management, 31(11), 2341–2351, 2011.
  • AYAN V., LIMBACHIYA, M.C., OMER J.R., AZADANI S.M.N., “Compaction Assessment of Recycled Aggregates for Use in Unbound Subbase Application”, Journal of Civil Engineering and Management, 20(2), 169-174, 2014.
  • ASTM D 422-63, “Standard Test Method for Particle-Size Analysis of Soils”. West Conshohocken, U.S.A., 2009.
  • ASTM D 1241-07, “Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses”. West Conshohocken, U.S.A., 2007.
  • TS 1500, “İnşaat Mühendisliğinde Zeminlerin Sınıflandırılması”, Ankara, Türkiye, 2000.
  • BS EN 933-11, “Tests for Geometrical Properties of Aggregates Part 11: Classification Test for the Constituents of Coarse Recycled Aggregate”. London, U.K., 2009.
  • ASTM C 127 – 01, “Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate” West Conshohocken, U.S.A., 2001.
  • ASTM C 128 – 01, “Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate” West Conshohocken, U.S.A., 2001.
  • TS 9582 EN 933-3, “Agregaların Geometrik Özellikleri İçin Deneyler Bölüm 3: Tane Şekli Tayini-Yassılık Endeksi”, Ankara, Türkiye, 1999.
  • ASTM C 131–03, “Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine”. West Conshohocken, U.S.A., 2003.
  • ASTM D 1557, “Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort”. West Conshohocken, U.S.A., 2012.
  • ASTM D 1883–99, “Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils”. West Conshohocken, U.S.A., 1999.
  • VIERIA, C.S., PEREIRA, P.M., “Damage induced by recycled Construction and Demolition Wastes on the Short-Term Tensile Behaviour of two Geosynthetics”, Transportation Geotechnics, 4, 64-75, 2015a.
  • PARK, T., “Application of Construction and Building Debris as Base and Subbase Materials in Rigid Pavement”, Journal of Transportation Engineering, 129, 558–563, 2003.
  • ARULRAJAH, A., PIRATHEEPAN, J., DISFANI, M.M., “Reclaimed Asphalt Pavement and Recycled Concrete Aggregate Blends in Pavement Subbases: Laboratory and Field Evaluation”, Journal of Materials in Civil Engineering, 26(2), 349-357, 2014a.
  • KAZMEE H., TUTUMLUER E., “Evaluation of Aggregate Subgrade Materials Used as Pavement Subgrade/Granular Subbase”, Illinois Center for Transportation. Research Report FHWA-ICT-15-013, 2015.
  • DISFANI, M.M., ARULRAJAH, A., HAGHIGHI, H., MOHAMMADINIA, A., HORPIBULSUK, S., “Flexural Beam Fatigue Strength Evaluation of Crushed Brick as a Supplementary Material in Cement Stabilized Recycled Concrete Aggregates”, Construction and Building Materials, 68, 667–676, 2014.
  • NEVES, J., FREIRE, A.C., ROQUE, A.J., MARTINS, I., ANTUNES, M.L., FARIA, G., “Utilization of Recycled Materials in Unbound Granular Layers Validated by Experimental Test Sections”, In: Ninth International Conference on the Bearing Capacity of Roads, Railways and Airfields, Trondheim, Norway, 2013.
  • PEREZ P., AGRELA F., HERRADOR R., ORDONEZ J., “Application of Cement-Treated Recycled Materials in the Construction of a Section of Road in Malaga, Spain”, Construction and Building Materials, 44, 593–599, 2013.
  • HERRADOR, R., PEREZ, P., GARACH, L., ORDONEZ, J., “Use of Recycled Construction and Demolition Waste Aggregate for Road Course Surfacing”, Journal of Transportation Engineering, 138(2), 182–190, 2012.
  • BLANKENAGEL B.J., “Characterization of Recycled Concrete for Use as Pavement Base Material”, Brigham Young University, Department of Civil and Environmental Engineering, Master of Science, 66s, 2005.
  • KARAYOLLARI TEKNİK ŞARTNAMESİ “Yol Altyapısı, Sanat Yapıları, Köprü ve Tüneller, Üstyapı ve Çeşitli İşler”, Ankara, Türkiye, 2013.
APA OK B, DEMİR A (2018). YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. , 224 - 236. 10.28948/ngumuh.386621
Chicago OK BAHADIR,DEMİR AHMET OĞUZ YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. (2018): 224 - 236. 10.28948/ngumuh.386621
MLA OK BAHADIR,DEMİR AHMET OĞUZ YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. , 2018, ss.224 - 236. 10.28948/ngumuh.386621
AMA OK B,DEMİR A YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. . 2018; 224 - 236. 10.28948/ngumuh.386621
Vancouver OK B,DEMİR A YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. . 2018; 224 - 236. 10.28948/ngumuh.386621
IEEE OK B,DEMİR A "YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ." , ss.224 - 236, 2018. 10.28948/ngumuh.386621
ISNAD OK, BAHADIR - DEMİR, AHMET OĞUZ. "YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ". (2018), 224-236. https://doi.org/10.28948/ngumuh.386621
APA OK B, DEMİR A (2018). YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 7(1), 224 - 236. 10.28948/ngumuh.386621
Chicago OK BAHADIR,DEMİR AHMET OĞUZ YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 7, no.1 (2018): 224 - 236. 10.28948/ngumuh.386621
MLA OK BAHADIR,DEMİR AHMET OĞUZ YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, vol.7, no.1, 2018, ss.224 - 236. 10.28948/ngumuh.386621
AMA OK B,DEMİR A YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. 2018; 7(1): 224 - 236. 10.28948/ngumuh.386621
Vancouver OK B,DEMİR A YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi. 2018; 7(1): 224 - 236. 10.28948/ngumuh.386621
IEEE OK B,DEMİR A "YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ." Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 7, ss.224 - 236, 2018. 10.28948/ngumuh.386621
ISNAD OK, BAHADIR - DEMİR, AHMET OĞUZ. "YAPIM YIKIM ATIKLARININ YOL TEMELLERİNDE KULLANILABİLİRLİĞİNİN İNCELENMESİ". Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi 7/1 (2018), 224-236. https://doi.org/10.28948/ngumuh.386621