Yıl: 2018 Cilt: 23 Sayı: 1 Sayfa Aralığı: 353 - 368 Metin Dili: Türkçe DOI: 10.17482/uumfd. 390068 İndeks Tarihi: 30-09-2019

FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ

Öz:
Bu çalışmada, emniyet kemeri çekme testi dayanımı hakkındaki Amerika düzenlemesi olan, FMVSS regülasyonuna uygun üç noktalı emniyet kemeri bağlantı barı tasarımı (ICP-InterConnect Point) ve koltuk konsolu tasarımı geliştirilmesi temel alınmıştır. Mevcut durumda ECE-R14 regülasyonu şartlarını sağlayan sürücü koltuğu geliştirilerek Amerika regülasyonu olan FMVSS 210'a da uyumlu hale getirilmesi amaçlanmıştır. Bu regülasyon gereği üç noktalı emniyet kemerinin iki bağlantı noktasının koltuk üzerindeki ICP Bar üzerinde bulunması gereklidir. Bu çalışmada sürücü koltuğu için bir çok ICP Bar tasarımı yapılmıştır. Ayrıca bu yeniliğin yanında tüm pazar müşterilerine cevap verebilmek için koltuk ve araç arasındaki ortaklaştırılmış bağlantı konsolu tasarımı yapılmıştır. Yapılan tüm ICP Bar ve Konsol tasarım çalışmalarının dizayn dondurma işlemi için bilgisayar ortamında yapılan kinematik ve yapısal analizleri, müşteri talepleri ve ergonomi açısından değerlendirilmiş, en uygun tasarım seçilmiştir.
Anahtar Kelime:

The Truck Driver Seat Development According to FMVSS 210

Öz:
This study concern about new design of three point seat belt anchorage bar (ICP-Inter Connect Point) and its adaptation on the seat and design development of common reinforced seat console. Main aim of this study, driver seat development with new ICP bar and new console according to FMVSS 210. This seat alredy suitable with ECE-R14 regulation but forces of ECE-R14 regulation lower than FMVSS 210 forces. There were made lots of design for ICP bar and console at the begining of the design study. This study was handled with kinematic and structure analysis, customer requests and ergonomy issues for choose the optimum design and make a design freeze. All of these datas were evaluated and optimum design selected. The seat was strengthened with new console structure and unified ICP bar.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Dassault Systems, Catia V5 Software (1994)
  • Deierlein, Bob. Fleet Equipment. (Aug 2000), Vol. 26 Issue 8, p48. 4p. 1 Diagram.Abstract: Focuses on design features and innovations made on truck seats for safety and driver retention in the United States. (AN: 3457526)
  • Gökhan Şendeniz, Ebru Pişgin (15-16 Mart 2016) Uludağ Üniversitesi V.Bilgilendirme ve Ar-Ge Günleri Proje Poster Sunumu, FMVSS 210 Amerika Normuna Göre Ağır Ticari Araç Sürücü Koltuğu Geliştirme Çalışmaları
  • Gökhan Şendeniz, Ferruh Öztürk (2014). 7. Otomotiv Teknolojileri Kongresi, 26-27 Mayıs 2014, Bursa. Yolcu Koltuklarında Topoloji Tasarım ve Yaklaşımları ile Optimizasyon
  • HyperWorks, Altair Opti Struct and Radioss Software (1985)
  • Skydel, Seth, Fleet Equipment. (Aug2008), Vol. 34 Issue 8, p40-42. 2p. The article focuses on the significance of ergonomics in seat design for safety, comfort and productivity. (A.N: 34238410)
  • U.S. Department of Transportation, National Highway Traffic Safety Administration, FMVSS 210 Regulation (1994).
  • United Nations, (2003). “Uniform provisions concerning the approval of vehicles with regard to safety belt anchorages”, ECE R14 Regulation.
APA PİŞGİN E, Solmaz E (2018). FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. , 353 - 368. 10.17482/uumfd. 390068
Chicago PİŞGİN Ebru,Solmaz Erol FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. (2018): 353 - 368. 10.17482/uumfd. 390068
MLA PİŞGİN Ebru,Solmaz Erol FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. , 2018, ss.353 - 368. 10.17482/uumfd. 390068
AMA PİŞGİN E,Solmaz E FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. . 2018; 353 - 368. 10.17482/uumfd. 390068
Vancouver PİŞGİN E,Solmaz E FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. . 2018; 353 - 368. 10.17482/uumfd. 390068
IEEE PİŞGİN E,Solmaz E "FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ." , ss.353 - 368, 2018. 10.17482/uumfd. 390068
ISNAD PİŞGİN, Ebru - Solmaz, Erol. "FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ". (2018), 353-368. https://doi.org/10.17482/uumfd. 390068
APA PİŞGİN E, Solmaz E (2018). FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 23(1), 353 - 368. 10.17482/uumfd. 390068
Chicago PİŞGİN Ebru,Solmaz Erol FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 23, no.1 (2018): 353 - 368. 10.17482/uumfd. 390068
MLA PİŞGİN Ebru,Solmaz Erol FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, vol.23, no.1, 2018, ss.353 - 368. 10.17482/uumfd. 390068
AMA PİŞGİN E,Solmaz E FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi. 2018; 23(1): 353 - 368. 10.17482/uumfd. 390068
Vancouver PİŞGİN E,Solmaz E FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi. 2018; 23(1): 353 - 368. 10.17482/uumfd. 390068
IEEE PİŞGİN E,Solmaz E "FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ." Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, 23, ss.353 - 368, 2018. 10.17482/uumfd. 390068
ISNAD PİŞGİN, Ebru - Solmaz, Erol. "FMVSS 210 NORMUNA GÖRE SÜRÜCÜ KOLTUĞU GELİŞTİRİLMESİ". Uludağ Üniversitesi Mühendislik Fakültesi Dergisi 23/1 (2018), 353-368. https://doi.org/10.17482/uumfd. 390068