Yıl: 2020 Cilt: 33 Sayı: 2 Sayfa Aralığı: 115 - 122 Metin Dili: İngilizce DOI: 10.5152/TurkJOrthod.2020.19103 İndeks Tarihi: 21-10-2020

Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments

Öz:
Objective: This study aimed to evaluate the effects of different surface conditoning methods on surface texture and shear bondstrength (SBS) of brackets bonded to resin nanoceramic material.Methods: Ceramic specimens were divided into two groups as metal brackets and ceramic brackets. In each group, the followingfive subgroups were conditoned with orthophosphoric acid (OPA), hydrofluoric acid (HFA), silica coating with Cojet, Nd: Yag laser, andFemtosecond (Fs) laser. Extra samples were used for scanning electron microscopy and 3D profilometer evaluation.Results: All surface conditioning methods caused optimum or higher SBS. Metal brackets had higher SBS than porcelain brackets, butthis difference reached statistical significance only in Fs laser group. OPA caused surface modification comparable to HFA because ofpolymer content of resin nanoceramic. Although Fs laser and Cojet conditioning caused optimum or higher SBS, surface damage ofthese methods to the resin nanoceramic specimens clearly seen on 3D profilometer.Conclusion: HFA and Nd: Yag laser are effective surface conditioning methods for resin nanoceramics. OPA combined with silane application caused optimum SBS and can be used as an alternative to HFA. Surface texture changes should be considered to determinesurface damage while deciding the optimum surface conditioning method for ceramics other than SBS.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • 1. Blatz MB, Sadan A, Kern M. Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003; 89: 268-74. [Crossref]
  • 2. Karan S, Büyükyilmaz T, Toroğlu MS. Orthodontic bonding to several ceramic surfaces: are there acceptable alternatives to conventional methods? Am J Orthod Dentofac Orthop 2007; 132: 7-14. [Crossref]
  • 3. Turk T, Sarac D, Sarac YS, Elekdag-Turk S. Effects of surface conditioning on bond strength of metal brackets to all-ceramic surfaces. Eur J Orthod 2006; 28: 450-6. [Crossref]
  • 4. Schmage P, Nergiz I, Herrmann W, Özcan M. Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces. Am J Orthod Dentofac Orthop 2003; 123: 540- 6. [Crossref]
  • 5. Erdur EA, Basciftci FA. Effect of Ti:sapphire laser on shear bond strength of orthodontic brackets to ceramic surfaces. Lasers Surg Med 2015; 47: 512-9. [Crossref]
  • 6. An KM Sohn DS. The effect of using laser for ceramic bracket bonding of porcelain surfaces. Korean J Orthod 2008; 38: 275-82. [Crossref]
  • 7. Goujat A, Abouelleil H, Colon P, Jeannin C, Pradelle N, Seux D, et al. Mechanical properties and internal fit of 4 CAD-CAM block materials. J Prosthet Dent. 2018; 119 :384-9. [Crossref]
  • 8. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013; 29: 419-26. [Crossref]
  • 9. Ruse ND, Sadoun MJ. Resin-composite blocks for dental CAD/CAM applications. J Dent Res 2014; 93: 1232-4. [Crossref]
  • 10. Nguyen JF, Migonney V, Ruse ND SM. Resin composite blocks via high-pressure high-temperature polymerization. Dent Mater 2012; 28: 529-34. [Crossref]
  • 11. Cevik P, Eraslan O, Eser K, Tekeli S. Shear bond strength of ceramic brackets bonded to surface-treated feldspathic porcelain after thermocycling. Int J Artif Organs 2018; 41: 160-7. [Crossref]
  • 12. Cevik P, Karacam N, Eraslan O, Sari Z. Effects of different surface treatments on shear bond strength between ceramic systems and metal brackets. J Adhes Sci Technol 2017; 31: 1105-15. [Crossref]
  • 13. Elsaka SE. Influence of surface treatments on bond strength of metal and ceramic brackets to a novel CAD/CAM hybrid ceramic material. Odontology 2016; 104: 68-76. [Crossref]
  • 14. Ozcan M. The use of chairside silica coating for different dental applications: a clinical report. J Prosthet Dent 2002; 87: 469-72. [Crossref]
  • 15. Artun J, Bergland S. Clinical trials with crystal growth conditioning as an alternative to acid-etch enamel pretreatment. Am J Orthod Dentofac Orthop 1984; 85: 333-40. [Crossref]
  • 16. Bourke BM, Rock WP. Factors Affecting the Shear Bond Strength of Orthodontic Brackets to Porcelain. Br J Orthod 1999; 26: 285-90. [Crossref]
  • 17. Alessandretti R, Borba M, Benetti P, Corazza PH, Ribeiro R, Della Bona A. Reliability and mode of failure of bonded monolithic and multilayer ceramics. Dent Mater. 2017; 33: 191-7. [Crossref]
  • 18. Della Bona A, Pecho OE, Ghinea R, Cardona JC, Pérez MM. Colour parameters and shade correspondence of CAD-CAM ceramic systems. J Dent 2015; 43: 726-34. [Crossref]
  • 19. Sfondrini MF, Gandini P, Malfatto M, Di Corato F, Trovati F, Scribante A. Computerized casts for orthodontic purpose using powder-free intraoral scanners: accuracy, execution time, and patient feedback. Biomed Res Int 2018; 4103232. [Crossref]
  • 20. Scribante A, Contreras-Bulnes R, Montasser MA, Vallittu PK. Orthodontics: Bracket Materials, Adhesives Systems, and Their Bond Strength. Biomed Res Int. 2016; 1329814. [Crossref]
  • 21. Thurmond JW, Barkmeier WW, Wilwerding TM. Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain. J Prosthet Dent 1994; 72: 355-9. [Crossref]
  • 22. Ji L, Li L, Devlin H, Liu Z, Jiao J, Whitehead D. Ti: Sapphire femtosecond laser ablation of dental enamel, dentine, and cementum. Lasers Med Sci 2012; 27: 197-204. [Crossref]
  • 23. Akpinar YZ, Irgin C, Yavuz T, Aslan MA, Kilic HS, Usumez A. Effect of femtosecond laser treatment on the shear bond strength of a metal bracket to prepared porcelain surface. Photomed Laser Surg 2015; 33: 206-12. [Crossref]
  • 24. Aglarci C, Demir N, Aksakalli S, Dilber E, Sozer OA, Kilic HS. Bond strengths of brackets bonded to enamel surfaces conditioned with femtosecond and Er:YAG laser systems. Lasers Med Sci 2016; 31: 1177-83. [Crossref]
  • 25. Hosseini MH, Sobouti F, Etemadi A, Chiniforush N, Shariati M. Shear bond strength of metal brackets to feldspathic porcelain treated by Nd:YAG laser and hydrofluoric acid. Lasers Med Sci 2015; 30: 837-41. [Crossref]
  • 26. Poosti M, Jahanbin A, Mahdavi P, Mehrnoush S. Porcelain conditioning with Nd: YAG and Er:YAG laser for bracket bonding in orthodontics. Lasers Med Sci 2012; 27: 321-4. [Crossref]
  • 27. Galia Reston E, Filho Calabrez S, Arossi G, Barreto Cogo R, Dos Santos Rocha C, Quadrado Closs L. Repairing ceramic restorations: final solution or alternative procedure? Oper Dent 2008; 33: 461-6. [Crossref]
  • 28. Zhang ZC, Qian YF, Yang YM, Feng QP, Shen G. Bond strength of metal brackets bonded to a silica-based ceramic with light-cured adhesive: influence of various surface treatment methods. J Orofac Orthop 2016; 77: 366-72. [Crossref]
  • 29. Ozcan M, Allahbeickaraghi A, Dundar M. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clin Oral Investig 2012; 16: 15-23. [Crossref]
  • 30. Backer AD, Eliseu AM, Eckert GJ. Effects of simulated gastric juice on CAD/CAM resin composites-morphological and mechanical evaluations. J Prosthodont 2017; 26: 424-31. [Crossref]
  • 31. Lawson NC, Bansal R, Burgess JO. Wear, strength, modulus and hardness of CAD/CAM restorative materials. Dent Mater 2016; 32: 275-83. [Crossref]
  • 32. Erdur EA, Basciftci FA. Effect of ti: sapphire-femtosecond laser on the surface roughness of ceramics. Lasers Surg Med 2015; 47: 833-8. [Crossref]
APA Kara M, Demir Ö, Doğru M (2020). Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. , 115 - 122. 10.5152/TurkJOrthod.2020.19103
Chicago Kara Mehmet,Demir Özgür,Doğru Mehmet Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. (2020): 115 - 122. 10.5152/TurkJOrthod.2020.19103
MLA Kara Mehmet,Demir Özgür,Doğru Mehmet Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. , 2020, ss.115 - 122. 10.5152/TurkJOrthod.2020.19103
AMA Kara M,Demir Ö,Doğru M Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. . 2020; 115 - 122. 10.5152/TurkJOrthod.2020.19103
Vancouver Kara M,Demir Ö,Doğru M Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. . 2020; 115 - 122. 10.5152/TurkJOrthod.2020.19103
IEEE Kara M,Demir Ö,Doğru M "Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments." , ss.115 - 122, 2020. 10.5152/TurkJOrthod.2020.19103
ISNAD Kara, Mehmet vd. "Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments". (2020), 115-122. https://doi.org/10.5152/TurkJOrthod.2020.19103
APA Kara M, Demir Ö, Doğru M (2020). Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. Turkish Journal of Orthodontics, 33(2), 115 - 122. 10.5152/TurkJOrthod.2020.19103
Chicago Kara Mehmet,Demir Özgür,Doğru Mehmet Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. Turkish Journal of Orthodontics 33, no.2 (2020): 115 - 122. 10.5152/TurkJOrthod.2020.19103
MLA Kara Mehmet,Demir Özgür,Doğru Mehmet Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. Turkish Journal of Orthodontics, vol.33, no.2, 2020, ss.115 - 122. 10.5152/TurkJOrthod.2020.19103
AMA Kara M,Demir Ö,Doğru M Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. Turkish Journal of Orthodontics. 2020; 33(2): 115 - 122. 10.5152/TurkJOrthod.2020.19103
Vancouver Kara M,Demir Ö,Doğru M Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments. Turkish Journal of Orthodontics. 2020; 33(2): 115 - 122. 10.5152/TurkJOrthod.2020.19103
IEEE Kara M,Demir Ö,Doğru M "Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments." Turkish Journal of Orthodontics, 33, ss.115 - 122, 2020. 10.5152/TurkJOrthod.2020.19103
ISNAD Kara, Mehmet vd. "Bond Strength of Metal and Ceramic Brackets on Resin Nanoceramic Material With Different Surface Treatments". Turkish Journal of Orthodontics 33/2 (2020), 115-122. https://doi.org/10.5152/TurkJOrthod.2020.19103