Yıl: 2020 Cilt: 33 Sayı: 3 Sayfa Aralığı: 780 - 789 Metin Dili: İngilizce DOI: 10.35378/gujs. 621930 İndeks Tarihi: 29-07-2022

Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method

Öz:
In this study, an experimental research was carried out for the production of plasticinjection molds with conformal cooling channels by laminated brazing method. In thiscontext, plastic injection mold conformal cooling channels was designed andmanufactured. In order to obtain three-dimensional complex cooling channels, mold coreswere separated into layers and processed as plates in different thicknesses. These plateswere combined with the vacuum brazing method. For the comparison, another mold witha linear cooling channel was produced. Plastic parts were produced by using both molds.In the experimental study, the cooling time, the surface temperature of the product andthe distortions in the product were examined. According to the results, it was determinedthat by using of conformal cooling channels, the cooling time decreased by 22%. It wasalso observed that there was nearly 50% decrease in the amount of warpage on theproduced plastic parts.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Dimla, D. E., M. Camilotto, F. Miani., "Design and optimisation of conformal cooling channels in injection moulding tools", Journal of Materials Processing Technology, 164: 1294-1300, (2005).
  • Yadegari, M., Masoumi, H., Gheisari, M., "Optimization of cooling channels in plastic injection molding", International Journal of Applied Engineering Research, 11(8): 5777-5780, (2016).
  • Qiao, H., "A systematic computer-aided approach to cooling system optimal design in plastic injection molding", International Journal of Mechanical Sciences, 48(4): 430-439, (2006).
  • Wang, G. L., Zhao, G. Q., Wang, X. X., "Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding", Materials & Design, 59: 310-322, (2014).
  • Li, C. G., Li, C. L., Liu, Y., Huang, Y., “A new C-space method to automate the layout design of injection mould cooling system”, Computer-Aided Design, 44(9): 811-823, (2012).
  • Kovács, J. G., Sikló, B., "Investigation of cooling effect at corners in injection molding", International Communications in Heat and Mass Transfer, 38(10): 1330-1334, (2011).
  • Altaf, K., Raghavan, V. R., Rani, A. M. A., "Comparative thermal analysis of circular and profiled cooling channels for injection mold tools", Journal of Applied Sciences, 11(11): 2068-2071, (2011).
  • Hassan, H., Regnier, N., Lebot, C., Pujos, C., Defaye, G., “Effect of cooling system on the polymer temperature and solidification during injection molding”, Applied Thermal Engineering, 29(8-9): 1786- 1791, (2009).
  • Zhou, H., Li, D., "Mold cooling simulation of the pressing process in TV panel production", Simulation Modelling Practice and Theory, 13(3): 273-285, (2005).
  • Wang, Y., Yu, K. M., & Wang, C. C., "Spiral and Conformal Cooling in Plastic Injection Molding" Computer-Aided Design 63: 1-11, (2015).
  • Göktaş, M., Güldaş, A., Bayraktar, Ö., “Cooling of plastic injection moulds using design adaptive cooling canals”, International Conference on Engineering and Natural Science (ICENS 2016), Sarajevo, 1987-1993, (2016).
  • Güldaş, A., Göktaş, M., “Comparison of straight, spiral conformal and zig-zag conformal cooling channels in plastic injection molds”, International Symposium on Innovative Approaches in Scientific Studies (ISAS 2019), Ankara, 4(1): 395-399, (2019).
  • Saifullah, A. B. M., Masood, S. H., Sbarski, I., "New cooling channel design for injection moulding", Proceedings of the World Congress on Engineering, 1:1-4, (2009).
  • Khan, M., Afaq, S. K., Khan, N. U., Ahmad, S., "Cycle time reduction in injection molding process by selection of robust cooling channel design", ISRN Mechanical Engineering, 2014:1-8, (2014).
  • Kitayama, S., Tamada, K., Takano, M., Aiba, S., "Numerical and experimental investigation on process parameters optimization in plastic injection molding for weldlines reduction and clamping force minimization", The International Journal of Advanced Manufacturing Technology, 97(5-8): 2087-2098, (2018).
  • Lu, C. T., Chen, C. H., Tseng, S. C., "Application of conformal cooling to reduce cooling time and warpage of a U-shaped plate", AIP Conference Proceedings, 2065(1): 030007, (2019).
  • Shinde, M. S., Ashtankar, K. M., “Additive manufacturing-assisted conformal cooling channels in mold manufacturing processes”, Adv. Mech. Eng., 9(5): 1687814017699764, (2017).
  • Åsberg, M., Fredriksson, G., Hatami, S., Fredriksson, W., Krakhmalev, P., "Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel", Materials Science and Engineering: A, 742: 584-589, (2019).
  • Jahan, S. A., Wu, T., Zhang, Y., Zhang, J., Tovar, A., Elmounayri, H., "Thermo-mechanical design optimization of conformal cooling channels using design of experiments approach", Procedia Manufacturing, 10: 898-911, (2017).
  • Rahim, S. Z. A., Sharif, S., Zain, A. M., Nasir, S. M., Mohd Saad, R., "Improving the quality and productivity of molded parts with a new design of conformal cooling channels for the injection molding process", Advances in Polymer Technology, 35(1): 21524, (2016).
  • Dang, X. P., Park, H. S., "Design of U-shape milled groove conformal cooling channels for plastic injection mold", International Journal of Precision Engineering and Manufacturing, 12(1): 73-84, (2011).
  • Ferreira, J. C., Mateus, A., "Studies of rapid soft tooling with conformal cooling channels for plastic injection moulding", Journal of Materials Processing Technology, 142(2): 508-516, (2003).
  • Sun, Y. F., Lee, K. S., Nee, A. Y. C., "Design and FEM analysis of the milled groove insert method for cooling of plastic injection moulds", The International Journal of Advanced Manufacturing Technology, 24(9-10): 715-726, (2004).
  • Eiamsa-Ard, K., Wannissorn, K., "Conformal bubbler cooling for molds by metal deposition process", Computer-Aided Design, 69: 126-133, (2015).
  • Göktaş, M., Güldaş, A., “Experimental Comparison of The Effects of Conformal and Straight Cooling Channels”, 2nd International Turkish World Engineering and Science Congress, November 7-10, Türkiye, 572-578, (2019).
  • Bryden, B. G., Pashby, I. R., "Hot platen brazing to produce laminated steel tooling", Journal of Materials Processing Technology, 110(2): 206-210, (2001).
  • Esmati, K., Omidvar, H., Jelokhani, J., Naderi, M., "Study on the microstructure and mechanical properties of diffusion brazing joint of C17200 Copper Beryllium alloy", Materials & Design, 53: 766- 773, (2014).
  • Bryden, B. G., Pashby, I. R., Wimpenny, D. I., Adams, C., "Laminated steel tooling in the aerospace industry", Materials & Design, 21(4): 403-408, (2000).
  • Yoo, S., Walczyk, D. F., "A preliminary study of sealing and heat transfer performance of conformal channels and cooling fins in laminated tooling", Journal of Manufacturing Science and Engineering, 129(2): 388-399, (2007).
  • Jahan, S. A., El-Mounayri, H., "Optimal conformal cooling channels in 3D printed dies for plastic injection molding", Procedia Manufacturing, 5: 888-900, (2016).
APA göktaş m, Guldas A (2020). Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. , 780 - 789. 10.35378/gujs. 621930
Chicago göktaş mustafa,Guldas Abdulmecit Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. (2020): 780 - 789. 10.35378/gujs. 621930
MLA göktaş mustafa,Guldas Abdulmecit Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. , 2020, ss.780 - 789. 10.35378/gujs. 621930
AMA göktaş m,Guldas A Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. . 2020; 780 - 789. 10.35378/gujs. 621930
Vancouver göktaş m,Guldas A Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. . 2020; 780 - 789. 10.35378/gujs. 621930
IEEE göktaş m,Guldas A "Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method." , ss.780 - 789, 2020. 10.35378/gujs. 621930
ISNAD göktaş, mustafa - Guldas, Abdulmecit. "Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method". (2020), 780-789. https://doi.org/10.35378/gujs. 621930
APA göktaş m, Guldas A (2020). Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. Gazi University Journal of Science, 33(3), 780 - 789. 10.35378/gujs. 621930
Chicago göktaş mustafa,Guldas Abdulmecit Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. Gazi University Journal of Science 33, no.3 (2020): 780 - 789. 10.35378/gujs. 621930
MLA göktaş mustafa,Guldas Abdulmecit Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. Gazi University Journal of Science, vol.33, no.3, 2020, ss.780 - 789. 10.35378/gujs. 621930
AMA göktaş m,Guldas A Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. Gazi University Journal of Science. 2020; 33(3): 780 - 789. 10.35378/gujs. 621930
Vancouver göktaş m,Guldas A Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method. Gazi University Journal of Science. 2020; 33(3): 780 - 789. 10.35378/gujs. 621930
IEEE göktaş m,Guldas A "Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method." Gazi University Journal of Science, 33, ss.780 - 789, 2020. 10.35378/gujs. 621930
ISNAD göktaş, mustafa - Guldas, Abdulmecit. "Production of Plastic Injection Molds with Conformal Cooling Channels by Laminated Brazing Method". Gazi University Journal of Science 33/3 (2020), 780-789. https://doi.org/10.35378/gujs. 621930