Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel
Yıl: 2020 Cilt: 7 Sayı: 2 Sayfa Aralığı: 149 - 155 Metin Dili: İngilizce DOI: 10.17350/HJSE19030000183 İndeks Tarihi: 28-11-2020
Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel
Öz: This study was undertaken to determine the controlled rolling and cooling conditions for the production of 20 mm thick American Petroleum Institute (API) X60 and X70 grade steel plates. Nb-Ti microalloyed steel slabs of 200 mm thickness were rolled at fourdifferent finish rolling temperatures (conventional, 950°C, 850°C and 800°C). In some trials, a water table was employed to provide accelerated cooling just after finish rolling. Mechanical tests (tensile, impact and drop weight tear-DWTT) and microstructural examinations were performed on the samples taken from the trial production plates. Fine grainedand essentially ferritic microstructures with strength values satisfying the minimum yieldstrength requirement of 415 MPa for the API X60 grade were easily obtained in all rollingconditions. However, the minimum yield strength requirement of 485 MPa for the APIX70 grade was reached only when accelerated cooling was applied after finish rolling. Theminimum 85% shear fracture required by the DWTT of the API PSL 2 specification couldbe met when the finish rolling temperature was lowered or when accelerated cooling wasapplied regardless of the finish rolling temperature.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- 1. The World Factbook, https://www.cia.gov/library/ publications/the-world-factbook /fields/383.html (Accessed on 10 June 2020)
- 2. Hopkins P. Pipelines: Past, Present, and Future, 5th Asian Pacific IIW International Congress, 7-9 March, Sydney, Australia, 2007.
- 3. Das AK. The Present and the Future of Line Pipe Steels for Petroleum Industry. Materials and Manufacturing Processes 25:1-3, 14-19 (2010). https://doi. org/10.1080/10426910903202427
- 4. Hillenbrand H-G, Gräf M, Kalwa C. Development and production of high strength pipeline steels. Niobium Science & Technology: Proceedings of the International Symposium Niobium 2001, 2-5 December, Orlando, Florida, USA, 2001.
- 5. Zhongmin Y. Ultra-Fine Grained Steels: Weng Y. (Ed), Springer-Verlag. Berlin Heidelberg, pp. 53-85, 2009. https://doi.org/10.1007/978-3-540-77230-9
- 6. Villalobos JC, Del-Pozo A, Campillo B, Mayen J, Serna S. Microalloyed Steels through History until 2018: Review of Chemical Composition, Processing and Hydrogen Service. Metals (2018) 8(5) 351. https://doi.org/10.3390/ met8050351
- 7. Lavigne O, Kotousov A, Luzin V. Microstructural, Mechanical, Texture and Residual Stress Characterizations of X52 Pipeline Steel. Metals (2017) 7(8) 306. https://doi. org/10.3390/met7080306
- 8. American Petroleum Institute, API Specification 5L, Specification for Line Pipe, Forty-Fifth Edition, December 2012.
- 9. Rosado DB, De Waele W, Vanderschueren D, Hertelé S. Latest developments in mechanical properties and metallurgical features of high strength line pipe steels. International Journal of Sustainable Construction and Design 4(1) 2013. https://doi.org/10.21825/scad.v4i1.742
- 10. Zhang G, Bai X, Stalheim D, Li S, Ding W. Development and Production of Heavy Gauge X80 and High Strength X90 Pipeline Steels Utilizing TMCP/Optimized Cooling Process. In: Proceedings of the 10th International Pipeline Conference IPC2014, Calgary, Alberta, Canada, 33265, 2014. https://doi.org/10.1115/IPC2014-33265
- 11. Outinen J, Mäkeläinen P. Mechanical properties of structural steel at elevated temperatures and after cooling down. Fire and Materials 28 (2‐4) (2004) 237-251. https://doi. org/10.1002/fam.849
- 12. Vervynckt S, Verbeken K, Lopez B, Jonas JJ. Modern HSLA steels and role of non-recrystallisation temperature. Int. Mater. Rev. 57:4 (2012) 187-207. https://doi.org/10.117 9/1743280411Y.0000000013
- 13. Homsher CN. Determination of the non-recrystallization temperature (TNR) in multiple microalloyed steels. MS Thesis, Colorado School of Mines, Colorado, USA, 2013.
- 14. Quchi C, Sampei T, Kozasu I. The Effect of Hot Rolling Condition and Chemical Composition on the Onset Temperature of − Transformation after Hot Rolling. Transactions ISIJ 22 (1982) 214-222. https://doi. org/10.2355/isijinternational1966.22.214
- 15. Tsuyama S. Thick Plate Technology for the Last 100 Years: A World Leader in Thermo Mechanical Control Process. ISIJ International 55-1 (2015) 67–78. http://dx.doi. org/10.2355/isijinternational.55.67
- 16. Bakkaloğlu A. Effect of processing parameters on the microstructure and properties of an Nb microalloyed steel. Materials Letters 56 (2002) 200–209. https://doi. org/10.1016/S0167-577X(02)00440-8
- 17. Mahmutoğlu MZ. Microstructure-Mechanical Property Characterization of a Line Pipe Steel Containing Niobium and Vanadium (in Turkish). Ph.D. Thesis, İstanbul Technical University, Istanbul, Turkey, (2003)
- 18. Gunes S. Production of API X60 and X70 Grade Steel Plates by Thermomechanical Controlled Rolling. MS Thesis, Atılım University, Ankara, Turkey, (2018).
- 19. ASTM A370-19e1, Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, West Conshohocken, PA, 2019, www.astm.org. https://doi. org/10.1520/A0370-19E01
- 20. API RP 5L3, Recommended Practice for Conducting DropWeight Tear Tests on Line Pipe third edition, February, American Petroleum Institute, 1996.
- 21. ASTM E112-13, Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 2013, www.astm.org. https://doi.org/10.1520/ E0112-13
- 22. Rasband WS. ImageJ. U.S. National Institutes of Health: Bethesda, MD, USA, https://imagej.nih.gov/ij/ 1997–2018.
- 23. Korczak P. Influence of controlled rolling condition on microstructure and mechanical properties of low carbon micro-alloyed steels. Journal of Materials Processing Technology 157–158 (2004) 553–556. https://doi. org/10.1016/j.jmatprotec.2004.07.113
- 24. Godefroid LB, Cândido LC, Toffolo RVB, Barbosa LHS. Microstructure and Mechanical Properties of Two Api Steels for Iron Ore Pipelines. Materials Research 17(Suppl. 1) (2014) 114-120. http://dx.doi.org/10.1590/S1516- 14392014005000068
- 25. Masoumi M, Echeverri EAA, Silva CC, Beres M, Abreu HFG. Effect of Different Thermomechanical Processes on the Microstructure, Texture, and Mechanical Properties of API 5L X70 Steel. Journal of Materials Engineering and Performance 27 (2018) 1694-1705. https://doi. org/10.1007/s11665-018-3276-z
- 26. Lan L-Y, Qiu C-L, Zhao D-W, Gao X-H. Microstructural Evolution and Mechanical Properties of Nb-Ti Microalloyed Pipeline Steel. Journal of Iron and Steel Research International 18(2) (2011) 57-63. https://doi. org/10.1016/S1006-706X(11)60024-1
| APA | Konca E (2020). Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. , 149 - 155. 10.17350/HJSE19030000183 |
| Chicago | Konca Erkan Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. (2020): 149 - 155. 10.17350/HJSE19030000183 |
| MLA | Konca Erkan Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. , 2020, ss.149 - 155. 10.17350/HJSE19030000183 |
| AMA | Konca E Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. . 2020; 149 - 155. 10.17350/HJSE19030000183 |
| Vancouver | Konca E Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. . 2020; 149 - 155. 10.17350/HJSE19030000183 |
| IEEE | Konca E "Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel." , ss.149 - 155, 2020. 10.17350/HJSE19030000183 |
| ISNAD | Konca, Erkan. "Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel". (2020), 149-155. https://doi.org/10.17350/HJSE19030000183 |
| APA | Konca E (2020). Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. Hittite Journal of Science and Engineering, 7(2), 149 - 155. 10.17350/HJSE19030000183 |
| Chicago | Konca Erkan Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. Hittite Journal of Science and Engineering 7, no.2 (2020): 149 - 155. 10.17350/HJSE19030000183 |
| MLA | Konca Erkan Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. Hittite Journal of Science and Engineering, vol.7, no.2, 2020, ss.149 - 155. 10.17350/HJSE19030000183 |
| AMA | Konca E Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. Hittite Journal of Science and Engineering. 2020; 7(2): 149 - 155. 10.17350/HJSE19030000183 |
| Vancouver | Konca E Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel. Hittite Journal of Science and Engineering. 2020; 7(2): 149 - 155. 10.17350/HJSE19030000183 |
| IEEE | Konca E "Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel." Hittite Journal of Science and Engineering, 7, ss.149 - 155, 2020. 10.17350/HJSE19030000183 |
| ISNAD | Konca, Erkan. "Production of 20 mm Thick API PSL 2 X60 and X70 Grade Plates from a Nb-Ti Microalloyed Steel". Hittite Journal of Science and Engineering 7/2 (2020), 149-155. https://doi.org/10.17350/HJSE19030000183 |
