The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds
Yıl: 2020 Cilt: 12 Sayı: 1 Sayfa Aralığı: 134 - 147 Metin Dili: İngilizce DOI: https://doi.org/10.29137/umagd.616829 İndeks Tarihi: 28-04-2021
The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds
Öz: 304L austenitic and 420 martensitic stainless steels are demanded in wide range of industries. 304L alloy exhibits good resistance to oxidizing medias up to 760°C and they also maintain superior impact properties at cryogenic temperatures while 420 alloy provides the strength values close to tool steels in with satisfactory corrosion properties in ambient atmospheres.In this work; 420 plate is TIG (Tungsten Inert Gas) welded with 304L plate with both thicknesses of 3 mm. Welding operation is applied by two passes under pure argon gas also with shielding the weld root. 3 types of TIG welding rods; ER312, ER316L and ER2209 are used in TIG welding for ensuring 3 different weld metal compositions. The effects of TIG welding rod type on weld metal phase ratios with microstructural and corrosion properties are investigated. Microstructural inspections and corrosion (weight loss) tests are applied to all joints after welding operations. The sample joined by ER312 TIG rod transformed the weld metal into dendritic microstructure and the sample joined by ER2209 TIG rod resulted in globular type of weld metal microstructure. The specimen that welded by ER316L type TIG welding rod resulted in the best corrosion test values among all welded samples.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- ASM Int. Handbook Committee, (2005). ‘Properties and Selection: Wrought Stainless Steels’ ASM Handbook Vol. 2, pp.1303.
- ASM Metals Handbook Vol. 4, (1991). Heat treating, ASM International.
- ASM Metals Handbook. Vol. 6, (1993). Welding Brazing and Soldering; ASM International. Almere, The Netherlands.
- ASTM G1, (2017). Standard test methods for preparing cleaning and evaluating corrosion test specimens, ASTM International, Reapproved.
- ASTM G31-12a, (2012). Standard guide for laboratory immersion corrosion testing of metals, NACE TM 0169, ASTM International.
- ASTM G48, (2015). Standard test methods for pitting and crevice corrosion resistance of stainless steels and related alloys by use of ferric chloride solution, ASTM International, Reapproved.
- ASTM E562-11. (2011). Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count;ASM International: Almere, The Netherlands.
- ASTM E1245 (2008). Standard Practice for Determining the Inclusion or Second Phase Constituent Content of Metals by Automatic Image Analysis; ASM International: Almere, The Netherlands.
- AWS A5.9, (2017). ‘Specification for Bare Stainless Steel Welding Electrodes and Rods’, American Welding Society.
- Corrosion of stainless steel weldments, ASM Handbook, Vol. 13-A. (2003). Corrosion: Fundamentals, testing and protection, ASM Int. p. 301-316.
- Douglas W. Dietrich, (1997). Magnetically Soft Materials, Properties and Selection, Non-ferrous materials and special purpose materials, pp. 2226, ASM Handbook Vol. 2, ASM International.
- EN ISO 8249. (2000). Welding-Determination of Ferrite Number (FN) in Austenitic and Duplex Ferritic-Austenitic Cr-Ni Stainless Steel Weld Metals; European Standard: Brussels, Belgium.
- EN ISO 14343, (2017). Welding consumables, Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels, International Standard.
- EN ISO 17655. (2003). Destructive Tests on Welds in Metallic Materials-Method for Taking Samples for Delta Ferrite Measurement; European Standard: Brussels, Belgium.
- George F. et all, (2004). Metallography and Microstructures, ASM Metals Handbook Vol. 9, ASM International, p. 670-700, USA.
- H.C. Dey, M. Ashfaq, A.K. Bhaduri, K.P. Rao, (2009). Joining of titanium to 304L stainless steel by friction welding, Journal of Materials Processing Technology, 209 5862–5870, Elsevier, doi: 10.1016/j.jmatprotec.2009.06.018.
- H.M. Soltani, M. Tayebi, (2018). Comparative study of AISI 304L to AISI 316L stainless steels joints by TIG and Nd:YAG laser welding, Journal of Alloys and Compounds, 767 pp.112-121, doi: 10.1016/j.jallcom.2018.06.302
- ISO 15614-1, (2017). Specification and qualification of welding procedures for metallic materials, Welding procedure test Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys, Second Edition, International Standard.
- Jastej Singh, A.S. Shahi, (2018). Weld joint design and thermal aging influence on the metallurgical, sensitization and pitting corrosion behavior of AISI 304L stainless steel welds, Journal of Manufacturing Processes, Volume 33, pp. 126-135,doi: 10.1016/j.jmapro.2018.05.004,
- J.C. Lippold, D. Kotecki, (2005). Welding Metallurgy and Weldability of Stainless Steels, Wiley Interscience, pp. 56-57.
- Jie Jiang, Dake Xu, Tong Xi, M. Babar Shahzad, M. Saleem Khan, Jinlong Zhao, Xinmin Fana, Chunguang Yang, Tingyue Gu, Ke Yang, (2016). Corrosion Science, 113 46–56, doi: 10.1016/j.corsci.2016.10.003.
- Kou S. (2002). Welding Metallurgy, 2nd ed.Wiley Interscience Publications, Hoboken, NJ, USA.
- M.M.A. Khan, L. Romoli, M. Fiaschi, G. Dini, F. Sarri, (2012). Laser beam welding of dissimilar stainless steels in a fillet joint configuration, Journal of Materials ProcessingTechnology, doi:10.1016/j.jmatprotec.2011.11.011.
- N. Kumar, M. Mukherjee, A. Bandyopadhyay, (2017). Comparative study of pulsed Nd:YAG laser welding of AISI 304 and AISI 316 stainless steels, Optics & Laser Technology, Elsevier, 88 24–39, doi: 10.1016/j.optlastec.2016.08.018.
- Pierre R. Roberge, (2000). Handbook of Corrosion Engineering, Chapter 8, Materials Selection, McGraw Hill Publications, p. 716
| APA | MURAT M, Başyiğit A (2020). The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. , 134 - 147. https://doi.org/10.29137/umagd.616829 |
| Chicago | MURAT Mustafa Gökhan,Başyiğit Aziz Barış The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. (2020): 134 - 147. https://doi.org/10.29137/umagd.616829 |
| MLA | MURAT Mustafa Gökhan,Başyiğit Aziz Barış The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. , 2020, ss.134 - 147. https://doi.org/10.29137/umagd.616829 |
| AMA | MURAT M,Başyiğit A The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. . 2020; 134 - 147. https://doi.org/10.29137/umagd.616829 |
| Vancouver | MURAT M,Başyiğit A The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. . 2020; 134 - 147. https://doi.org/10.29137/umagd.616829 |
| IEEE | MURAT M,Başyiğit A "The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds." , ss.134 - 147, 2020. https://doi.org/10.29137/umagd.616829 |
| ISNAD | MURAT, Mustafa Gökhan - Başyiğit, Aziz Barış. "The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds". (2020), 134-147. https://doi.org/https://doi.org/10.29137/umagd.616829 |
| APA | MURAT M, Başyiğit A (2020). The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 12(1), 134 - 147. https://doi.org/10.29137/umagd.616829 |
| Chicago | MURAT Mustafa Gökhan,Başyiğit Aziz Barış The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi 12, no.1 (2020): 134 - 147. https://doi.org/10.29137/umagd.616829 |
| MLA | MURAT Mustafa Gökhan,Başyiğit Aziz Barış The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, vol.12, no.1, 2020, ss.134 - 147. https://doi.org/10.29137/umagd.616829 |
| AMA | MURAT M,Başyiğit A The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi. 2020; 12(1): 134 - 147. https://doi.org/10.29137/umagd.616829 |
| Vancouver | MURAT M,Başyiğit A The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi. 2020; 12(1): 134 - 147. https://doi.org/10.29137/umagd.616829 |
| IEEE | MURAT M,Başyiğit A "The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds." Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 12, ss.134 - 147, 2020. https://doi.org/10.29137/umagd.616829 |
| ISNAD | MURAT, Mustafa Gökhan - Başyiğit, Aziz Barış. "The Effects of TIG Welding Rod Compositions on Phase Distributions andCorrosion Properties of Dissimilar 304L and 420 Stainless Steel Welds". Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi 12/1 (2020), 134-147. https://doi.org/https://doi.org/10.29137/umagd.616829 |
