OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY

Gör, Buğra; KARAKAYA, GULSAH

OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY

Buğra GÖR, (McKinsey & Company, Mustafa Kemal Mah., A blok, No:50, Tepe Prime Çankaya, Ankara, Türkiye)

Gülşah KARAKAYA (Orta Doğu Teknik Üniversitesi, İktisadi ve İdari Bilimler Fakültesi, İşletme Bölümü, Ankara, Türkiye)

Endüstri Mühendisliği

1 0

Yıl: 2021 Cilt: 32 Sayı: 1 Sayfa Aralığı: 147 - 163 Metin Dili: İngilizce İndeks Tarihi: 04-06-2021

OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY

Öz:

With the advances in sensor and data transfer technologies, the usage areas ofAutomatic License Plate Recognition (ALPR) systems have been expanded in the publicand private sectors. In public safety, ALPR systems are used to monitor and controltraffic data at both individual and collective levels. To build an efficient sensornetwork, the locations of ALPR systems should be determined optimally. This studyprovides an approach to determine optimal locations of ALPR systems that maximizenetwork coverage consisting of two measures: i) vehicle coverage and ii) roadcoverage. The former represents the daily average vehicle flow whereas the latterstands for the number of road-links covered. The relative importance of vehicle androad coverages are taken into consideration, and optimal solutions under variousscenarios are presented. A close neighbor constraint is introduced to avoid inefficientdistribution of ALPR systems on the network. A case study with numerical examplesdesigned for two cities in Turkey is provided. The centralized and decentralizedsolutions are compared against the current state, and the results show that thenetwork coverage increases substantially in the centralized case.

Anahtar Kelime:

PLAKA TANIMA SENSORÜ YER SEÇİMİ OPTİMİZASYONU: TÜRKİYE ÖRNEĞİ

Öz:

Sensör ve veri aktarım teknolojilerindeki gelişmeler ile Otomatik Plaka Tanıma (OPT) sistemlerinin kamu ve özel sektörde kullanım alanları genişlemiştir. OPT sistemleri kamu güvenliğinde trafik verilerini hem bireysel hem de kolektif düzeylerde izlemek ve kontrol etmek için kullanılmaktadır. Etkin bir sensör ağı oluşturmak için OPT sistemlerinin konumu optimal şekilde belirlenmelidir. Bu çalışma, OPT sistemlerinin konumlarını i) araç kapsama ve ii) yol kapsamadan oluşan ağ kapsamayı maksimize edecek şekilde belirlemek için bir yaklaşım sunmaktadır. İlki günlük ortalama araç akışını temsil ederken, ikincisi kapsanan yol bağlantılarının sayısını temsil etmektedir. Araç ve yol kapsamanın göreceli önemi dikkate alınarak çeşitli senaryolar altında optimal çözümler sunulmuştur. OPT sistemlerinin ağ üzerinde verimsiz dağıtımını önlemek için yakın komşu kısıtlaması getirilmiştir. Türkiye’deki iki şehir için tasarlanmış sayısal örneklerle bir vaka çalışması sunulmuştur. Merkezi ve yerel çözümler mevcut durumla karşılaştırmıştır ve sonuçlar merkezi durumda ağ kapsamının önemli ölçüde arttığını göstermektedir.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

Atta, S., Mahapatra, P. R. S. & Mukhopadhyay, A. (2018). Solving maximal covering location problem using genetic algorithm with local refinement. Soft Computing, 22(12), 3891-3906. Doi: https://doi.org/10.1007/s00500-017- 2598-3
Castillo, E., Menéndez, J. M. & Jiménez, P. (2008). Trip matrix and path flow reconstruction and estimation based on plate scanning and link observations. Transportation Research Part B: Methodological, 42(5), 455-481. Doi: https://doi.org/10.1016/j.trb.2007.09.004
Coaffee, J. (2004). Rings of steel, rings of concrete and rings of confidence: designing out terrorism in central London pre and post September 11th. International Journal of Urban and Regional Research, 28(1), 201-211. Doi: https://doi.org/ 10.1111/j.0309-1317.2004.00511.x
Chow, A. H., Cheung, C. Y. & Yoon, H. T. (2015). Optimization of police facility locationing. Transportation Research Record, 2528(1), 60-68. Doi: https://doi.org/ 10.3141/2528-07
Díaz, J. A., Luna, D. E., Camacho-Vallejo, J. F. & CasasRamírez, M. S. (2017). GRASP and hybrid GRASPTabu heuristics to solve a maximal covering location problem with customer preference ordering. Expert Systems with Applications, 82, 67-76. Doi: https://doi.org/10.1016/ j.eswa.2017.04.002
Fakhouri, A. A. & Soltani, R. (2020). Multi-objective robust optimization for the traffic sensors location problem. IEEE Access. Doi: http://dx.doi.org/10.1109/ACCESS.2020.3047045
Farahani, R. Z., Asgari, N., Heidari, N., Hosseininia, M. & Goh, M. (2012). Covering problems in facility location: A review. Computers & Industrial Engineering, 62(1), 368-407. Doi: https://doi.org/10.1016/j.cie.2011.08.020
General Directorate of Highways. Traffic Volume Map (2016) Retrieved from: http://www.kgm.gov.tr/SiteCollectionDocument s/KGMdocuments/Trafik/trafikhacimharitasi/2 016HacimHaritalari/Hacim2016Devlet.pdf. Accessed 31 August 2018.
Gentili, M. & Mirchandani, P. (2011). Survey of models to locate sensors to estimate traffic flows. Transportation Research Record: Journal of the Transportation Research Board, (2243), 108- 116. Doi: https://doi.org/10.3141/2243-13
Jia, H., Ordonez, F. & Dessouky, M. M. (2007). Solution approaches for facility location of medical supplies for large-scale emergencies. Computers & Industrial Engineering, 52(2), 257-276. Doi: https://doi.org/10.1016/j.cie.2006.12.007
Karatas, M. & Yakıcı, E. (2018). An iterative solution approach to a multi-objective facility location problem. Applied Soft Computing, 62, 272-287. Doi: https://doi.org/10.1016/j.asoc.2017.10.035
Lessin, A. M., Lunday, B. J. & Hill, R. R. (2018). A bilevel exposure-oriented sensor location problem for border security. Computers & Operations Research, 98, 56-68. Doi: https://doi.org/10.1016/j.cor.2018.05.017
Sarıkaya, H. A., Aygüneş, H. & Kılıç, A. (2020). Determining the locations of the gendarmerie stations using the maximal covering method. Journal of Industrial Engineering, 31(1), 28-47.
Sousanis, J. (2011). World vehicle population tops 1 billion units. Wards Auto, 15. Retrieved from: https://www.wardsauto.com/newsanalysis/world-vehicle-population-tops-1- billion-units.
United States Department of Justice. Office of Justice Programs. Bureau of Justice Statistics. Law Enforcement Management and Administrative Statistics (LEMAS), 2007. ICPSR31161-v1. Ann Arbor, MI: Inter-university Consortium for Political and Social Research [distributor], 2011- 07-07. Doi: https://doi.org/10.3886/ ICPSR31161.v1
United States Department of Justice. Office of Justice Programs. Bureau of Justice Statistics. Law Enforcement Management and Administrative Statistics (LEMAS), 2013. ICPSR36164-v2. Ann Arbor, MI: Inter-university Consortium for Political and Social Research [distributor], 2015- 09-22. Doi: https://doi.org/10.3886/ ICPSR36164.v2
Vieira, B. S., Ferrari, T., Ribeiro, G. M., Bahiense, L., Orrico Filho, R. D., Abramides, C. A. & Júnior, N. F. R. C. (2020). A progressive hybrid set covering based algorithm for the traffic counting location problem. Expert Systems with Applications, 160, 113641. Doi: https://doi.org/10.1016/j.eswa. 2020.113641
Voelcker, J. (2014). 1.2 Billion Vehicles On World’s Roads Now, 2 Billion By 2035: Report. Green Car Reports, July, 29. Retrieved from: https://www.greencarreports.com/news/1093 560_1-2-billion-vehicles-on-worlds-roads-now2-billion-by-2035-report
Wang, J., Ghosh, R. K. & Das, S. K. (2010). A survey on sensor localization. Journal of Control Theory and Applications, 8(1), 2-11. Doi: https://doi.org/10.1007/s11768-010-9187-7
Yang, H. & Zhou, J. (1998). Optimal traffic counting locations for origin–destination matrix estimation. Transportation Research Part B: Methodological, 32(2), 109-126. Doi: https://doi.org/10.1016/S0191- 2615(97)00016-7

APA	Gör B, KARAKAYA G (2021). OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. , 147 - 163.
Chicago	Gör Buğra,KARAKAYA GULSAH OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. (2021): 147 - 163.
MLA	Gör Buğra,KARAKAYA GULSAH OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. , 2021, ss.147 - 163.
AMA	Gör B,KARAKAYA G OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. . 2021; 147 - 163.
Vancouver	Gör B,KARAKAYA G OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. . 2021; 147 - 163.
IEEE	Gör B,KARAKAYA G "OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY." , ss.147 - 163, 2021.
ISNAD	Gör, Buğra - KARAKAYA, GULSAH. "OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY". (2021), 147-163.

APA	Gör B, KARAKAYA G (2021). OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. Endüstri Mühendisliği, 32(1), 147 - 163.
Chicago	Gör Buğra,KARAKAYA GULSAH OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. Endüstri Mühendisliği 32, no.1 (2021): 147 - 163.
MLA	Gör Buğra,KARAKAYA GULSAH OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. Endüstri Mühendisliği, vol.32, no.1, 2021, ss.147 - 163.
AMA	Gör B,KARAKAYA G OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. Endüstri Mühendisliği. 2021; 32(1): 147 - 163.
Vancouver	Gör B,KARAKAYA G OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY. Endüstri Mühendisliği. 2021; 32(1): 147 - 163.
IEEE	Gör B,KARAKAYA G "OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY." Endüstri Mühendisliği, 32, ss.147 - 163, 2021.
ISNAD	Gör, Buğra - KARAKAYA, GULSAH. "OPTIMIZATION OF PLATE RECOGNITION SENSOR LOCATIONS: A CASE STUDY IN TURKEY". Endüstri Mühendisliği 32/1 (2021), 147-163.