Yıl: 2021 Cilt: 5 Sayı: 1 Sayfa Aralığı: 52 - 57 Metin Dili: İngilizce DOI: 10.30939/ijastech..837414 İndeks Tarihi: 29-06-2021

Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission

Öz:
Finite element based tooth contact analysis of a rack and pinion system of an impulse continuously variable transmission is performed in this study. The rack and pinion system are designed with involute profile herringbone tooth profiles. The involute profile herringbone tooth profile is a type of concave-convex pro-files, which can be used for heavy load conditions. A contact load distribution model of the rack gear with involute profile herringbone tooth profiles is devel-oped to analyze normal loads of any mashing position of the rack pinion system based on the minimum elastic potential energy theory. With the aim of improving the rack and pinion system design, the actual operation of gears under the terms of the three-dimensional tooth contact analysis is conducted. A rack gear with herringbone tooth profiles and a pinion are used to tooth contact analysis. Based on comparing the results of this analysis, a new type of rack gears with concave-convex involute tooth profile are advantages and disadvantages in terms of the contact stress.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • [1] Srivastava N, Haque I. A review on belt and chain continuously variable transmissions (CVT): Dynamics and control. Mech Mach Theory. 2009;44(1):19-41.
  • [2] Hu YH, Li G, Zhu WD, Cui JK. An elastic transmission error compensation method for rotary vector speed reducers based on error sensitivity analysis. Appl Sci. 2020;10(2):481.
  • [3] Yan J, Li G, Liu K. Development trend of wind power technology. Int J Adv Eng Res Sci. 2020;7(6):124-132.
  • [4] Zhu Y, Liu KC. The present situation of research and development of impulse stepless speed variator. Pack Food Mach. 2003;21(5):11-14.
  • [5] Li G. Design and modeling of an impulse continuously variable transmission with a rotational swashplate. Int J Auto Sci Tech. 2020;4(4):307-313.
  • [6] Xu M, Zhang X, Hu G, Li G. The structure design and flow field simulation of a fire water monitor driven by worm gear with bevel gear. Mach Tool & Hydra. 2016;6:57-61.
  • [7] Gu KL, Wang ZH, Li G, Liu XR. Optimization of geometric parameters of the straight conjugate internal gear pump based on GA. Elec Sci Tech, 2017;30(6):39-42.
  • [8] Zhang XL, Wang ZH, Li G. Research on virtual hobbing simulation and study of tooth surface accuracy of involute helical gears. Appl Mech Mater. 2012;155:601-605.
  • [9] Li G, Wang ZH, Zhu WD, Kubo A. A function-oriented active form-grinding method for cylindrical gears based on error sensitivity. Int J Adv Manuf Tech. 2017;92(5-8):3019-3031.
  • [10] Wang ZH, Zhu WM, Li G, Geng Z. Optimization of contact line for form-grinding modified helical gears based on neural network. China Mech Eng. 2014;25(12):1665-1671.
  • [11] Li G. An active forming grinding method for cylindrical involute gears based on a second-order transmission error model. SCIREA J Mech Eng. 2019;2(1):1-14.
  • [12] Li G, Zhu WD. An active ease-off topography modification approach for hypoid pinions based on a modified error sensitivity analysis method. ASME J Mech Des. 2019;141(9):093302.
  • [13] Li G, Wang ZH, Kubo A. Error-sensitivity analysis for hypoid gears using a real tooth surface contact model. Proc Instn Mech Eng, Part C: J Mech Eng Sci. 2017;231(3):507-521.
  • [14] Zhang WX, Wang ZH, Liu XR, Li G, Wan PL, Wang W. Research on optimization of temperature measuring point and thermal error prediction method of CNC machine tools. J Shaanxi University of Tech (Na Sci Ed). 2017; 33(3):18-24.
  • [15] Wang ZH, Cao H, Li G, Liu XR. Compensation of the radial error of measuring head based on forming grinding machine. J Mech Trans. 2017;41(3):143-146.
  • [16] Wang ZH, Song XM, He WM, Li G, Zhu WM, Geng Z. Tooth surface model construction and error evaluation for tooth-trace modification of helical gear by form grinding. China Mech Eng. 2015;26(21):2841-2847.
  • [17] Li G, Wang ZH, Kubo A. Tooth contact analysis of spiral bevel gears based on digital real tooth surfaces. Chin J Mech Eng. 2014;50(15):1-11.
  • [18] Wang ZH, Wang J, Ma PC, Li G. Dynamic transmission error analysis of spiral bevel gears with actual tooth surfaces. J Vib Shock. 2014;33(15):138-143.
  • [19] Wang ZH, Wang J, Wang QL, Li G. Transmission error of spiral bevel gear based on finite element method. J of Vib Shock. 2014;33(14):165-170.
  • [20] Li G, Wang ZH, Kubo A. The modeling approach of digital real tooth surfaces of hypoid gears based on non-geometric-feature segmentation and interpolation algorithm. Int J Prec Eng Manuf. 2016;17(3):281-292.
  • [21] Li G, Zhu WD. Design and power loss evaluation of a noncircular gear pair for an infinitely variable transmission. Mech Mach Theory. 2021;156:104137.
  • [22] van Berkel K, Hofman T, Vroemen B, Steinbuch M. Optimal control of a mechanical hybrid powertrain. IEEE Trans Vehic Tech. 2012;61(2):485-497.
  • [23] Huang DQ, Wang ZH, Li G, Zhu WD. Conjugate approach for hypoid gears frictional loss comparison between different roughness patterns under mixed elastohydrodynamic lubrication regime. Tribo Int. 2019;140:105884.
  • [24] Li G, Wang ZH, Zhu WD. Prediction of surface wear of involute gears based on a modified fractal method. ASME J Tribo. 2019;141(3):031603.
  • [25] Li G, Wang ZH, Geng Z, Zhu WM. Modeling approach of digital real tooth surfaces of hypoid gears based on non-geometric-feature segmentation and interpolation algorithm. Chin J Mech Eng. 2015;51(7):77-84.
  • [26] Wang ZH, Yuan KK, Li G. Optimization identification for dynamic characteristics parameters of sliding joints based on response surface methodology. China Mech Eng. 2016;27(5):622-626.
  • [27] Hu YH, Li G, Hu AM. Iterative optimization of orbital dynamics based on model prediction. Front Arti Intel App. 2019;320:76-86.
APA Li G, 耿 耿 (2021). Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. , 52 - 57. 10.30939/ijastech..837414
Chicago Li Gang,耿 耿直 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. (2021): 52 - 57. 10.30939/ijastech..837414
MLA Li Gang,耿 耿直 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. , 2021, ss.52 - 57. 10.30939/ijastech..837414
AMA Li G,耿 耿 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. . 2021; 52 - 57. 10.30939/ijastech..837414
Vancouver Li G,耿 耿 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. . 2021; 52 - 57. 10.30939/ijastech..837414
IEEE Li G,耿 耿 "Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission." , ss.52 - 57, 2021. 10.30939/ijastech..837414
ISNAD Li, Gang - 耿, 耿直. "Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission". (2021), 52-57. https://doi.org/10.30939/ijastech..837414
APA Li G, 耿 耿 (2021). Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. International Journal of Automotive Science and Technology, 5(1), 52 - 57. 10.30939/ijastech..837414
Chicago Li Gang,耿 耿直 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. International Journal of Automotive Science and Technology 5, no.1 (2021): 52 - 57. 10.30939/ijastech..837414
MLA Li Gang,耿 耿直 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. International Journal of Automotive Science and Technology, vol.5, no.1, 2021, ss.52 - 57. 10.30939/ijastech..837414
AMA Li G,耿 耿 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. International Journal of Automotive Science and Technology. 2021; 5(1): 52 - 57. 10.30939/ijastech..837414
Vancouver Li G,耿 耿 Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission. International Journal of Automotive Science and Technology. 2021; 5(1): 52 - 57. 10.30939/ijastech..837414
IEEE Li G,耿 耿 "Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission." International Journal of Automotive Science and Technology, 5, ss.52 - 57, 2021. 10.30939/ijastech..837414
ISNAD Li, Gang - 耿, 耿直. "Tooth Contact Analysis of Herringbone Rack Gears of an Impulse Continuously Variable Transmission". International Journal of Automotive Science and Technology 5/1 (2021), 52-57. https://doi.org/10.30939/ijastech..837414