Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading
Yıl: 2021 Cilt: 5 Sayı: 1 Sayfa Aralığı: 58 - 62 Metin Dili: İngilizce DOI: 10.30939/ijastech..826458 İndeks Tarihi: 29-06-2021
Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading
Öz: In real crash cases, simple bending behavior is not common. In this case, using the three-point bending test to examine the bending behavior provides a closer simulation in terms of the representation of the structure under loading. It is seen in the literature that products with tube sections are generally used as door im-pact beams. On the other hand, when examining the three-point bending behavior of developed high strength steels, it is seen that the studies on tube profiles are only evaluated in terms of hydroforming. In this study, dual-phase steel tubes used as door impact beams are investigated by means of bending loading with experimental and numerical studies. For this purpose, DP500 and DP600 steel grades are used as materials. Three-point bending tests are performed for both materials then force-stroke curves, and springback values are obtained experi-mentally. In the second stage of the study, finite element analyses are performed using Hill-48 plasticity model. Force-stroke curves, the amount of springback, and the product forms are compared with the experimental results. It is seen that force-stroke curves and product forms are obtained highly compatible with the experimental results however the amount of springback values in finite element analyses are determined higher than the experimental results.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- [1] Nemani R, Arakerimath R R. Taguchi based design optimization of side impact beam for energy absorption. Int J Adv Res in Eng and Technol. 2015; 3(9):100-104.
- [2] Li M F, Chiang T S, Tseng J H, Tsai C N. Hot stamping of door impact beam. Procedia Engineering. 11th International Conference on Technology of Plasticity, 19-24 October 2014, Nagoya Congress Center, Nagoya, Japan. 2014; pp. 1786-1791.
- [3] Shaharuzaman M A, Sapuan S M, Mansor M R, Zuhri M Y M. Passenger Car’s Side Door Impact Beam: A Review. J of Eng and Technol. 2018; 9, 1.
- [4] Lim T S. Mechanically fastened composite side-door impact beams for passenger cars designed for shear-out failure modes. Comp Struct, 2002; 56(2):211-221.
- [5] Pavlina E J, Van Tyne C J, Hertel K. Hydraulic bulge testing of dual phase steel tubes produced using a novel processing route. J Mater Proces Technol. 2008; 201(1-3):242-246.
- [6] Oliver C. (Dual Phase Steel Characterization for Tube Bending and Hydroforming Applications. MSc Thesis, University of Windsor, Mechanical, Automotive & Materials Engineering, 2010.
- [7] Ghadianlou A, Abdullah S B. Crashworthiness design of vehicle side door beams under low-speed pole side impacts. Thin-Wall Struct. 2013; 67:25-33.
- [8] Kayacan R. 3 Nokta Eğme Deney Raporu. Süleyman Demirel Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü, Isparta, Türkiye, 2015.
- [9] Sadighi A, Eyvazian A, Asgari M, Hamouda A M. A novel axially half corrugated thin-walled tube for energy absorption under axial loading. Thin-Wall Struct. 2019; 145,106418.
- [10] Guo L, Liu Y, Fu F, Huang H. Behavior of axially loaded circular stainless-steel tube confined concrete stub columns. Thin-Wall Struct. 2019; 139:66-76.
- [11] Nikkhah H, Baroutaji A, Olabi A G Crashworthiness design and optimization of windowed tubes under axial impact loading. ThinWall Struct. 2019; 142:132-148.
- [12] Huang Z, Zhang X. Three-point bending collapse of thin-walled rectangular beams. Int J Mech Sci. 2018; 144:461-479.
- [13] Ozsoy M, Esener E, Ercan S, Firat M. Springback predictions of a dual-phase steel considering elasticity evolution in stamping process. Arabian J Sci and Eng. 2014; 39(4):3199-3207.
- [14] Hill R. A theory of The Yielding and Plastic Flow of Anisotropic Materials, Proc Roy Soc London. 1948; 281-297.
- [15] Zang S L, Thuillier S, Le Port A, Manach P Y. Prediction of anisotropy and hardening for metallic sheets in tension, simple shear and biaxial tension. Int J Mech Sci. 2011; 53(5):338-347.
- [16] Ghaei A, Green D E, Taherizadeh A. Semi-implicit numerical integration of Yoshida–Uemori two-surface plasticity model. Int J Mech Sci. 2010; 52(4):531-540.
| APA | Karahan O, ESENER E (2021). Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. , 58 - 62. 10.30939/ijastech..826458 |
| Chicago | Karahan Oğuz can,ESENER Emre Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. (2021): 58 - 62. 10.30939/ijastech..826458 |
| MLA | Karahan Oğuz can,ESENER Emre Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. , 2021, ss.58 - 62. 10.30939/ijastech..826458 |
| AMA | Karahan O,ESENER E Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. . 2021; 58 - 62. 10.30939/ijastech..826458 |
| Vancouver | Karahan O,ESENER E Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. . 2021; 58 - 62. 10.30939/ijastech..826458 |
| IEEE | Karahan O,ESENER E "Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading." , ss.58 - 62, 2021. 10.30939/ijastech..826458 |
| ISNAD | Karahan, Oğuz can - ESENER, Emre. "Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading". (2021), 58-62. https://doi.org/10.30939/ijastech..826458 |
| APA | Karahan O, ESENER E (2021). Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. International Journal of Automotive Science and Technology, 5(1), 58 - 62. 10.30939/ijastech..826458 |
| Chicago | Karahan Oğuz can,ESENER Emre Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. International Journal of Automotive Science and Technology 5, no.1 (2021): 58 - 62. 10.30939/ijastech..826458 |
| MLA | Karahan Oğuz can,ESENER Emre Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. International Journal of Automotive Science and Technology, vol.5, no.1, 2021, ss.58 - 62. 10.30939/ijastech..826458 |
| AMA | Karahan O,ESENER E Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. International Journal of Automotive Science and Technology. 2021; 5(1): 58 - 62. 10.30939/ijastech..826458 |
| Vancouver | Karahan O,ESENER E Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading. International Journal of Automotive Science and Technology. 2021; 5(1): 58 - 62. 10.30939/ijastech..826458 |
| IEEE | Karahan O,ESENER E "Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading." International Journal of Automotive Science and Technology, 5, ss.58 - 62, 2021. 10.30939/ijastech..826458 |
| ISNAD | Karahan, Oğuz can - ESENER, Emre. "Determining the Behavior of Door Impact Beam Tubes Under Three Point Bending Loading". International Journal of Automotive Science and Technology 5/1 (2021), 58-62. https://doi.org/10.30939/ijastech..826458 |
