Today, although the resection method is not used much with the development of satellite technology, it may be necessary to use the classical resection method where the signals of the satellites cannot be received. In the measurement information literature, in the methods of Collin, Kaestner and Cassini related to the calculation of the coordinate of the resection point, the states of the angles measured at the resection point less than 100g has been taken into account. When the angles measured at the resection point are greater than 100g , difficulties arise in the coordinate calculation of the resection point by the Collins method, which is one of the calculation methods. In other words, when the angles measured between the triangulation points at the resection point are greater than 100g , it is understood that the problem cannot be solved in the classical way of the Collins method. For the solution of the problem, it has been observed that this issue was included in a source in the literature, but the solution was different from the method we would recommend. In this study, the solution method specified in the literature and the method suggested by us will be explained. In the study, applications on the subject were made and the findings and opinions were stated.