ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI

Ahu ÇELEBİ, (Manisa Celal Bayar Üniversitesi, Mühendislik Fakültesi, Metalurji ve Malzeme Mühendisliği Bölümü, Manisa, Türkiye)
Yağmur KODA (Ege Üniversitesi, Mühendislik Fakültesi, Elektrik Elektronik Mühendisliği Bölümü, İzmir, Türkiye)
International Journal of 3D Printing Technologies and Digital Industry
8 1
Yıl: 2021 Cilt: 5 Sayı: 1 Sayfa Aralığı: 85 - 97 Metin Dili: Türkçe DOI: 10.46519/ij3dptdi.837635 İndeks Tarihi: 29-07-2022

ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI

Öz:
Bu derleme makalesi, katmanlı imalatta (Kİ) sensör entegrasyonuna odaklanmıştır. Devrim yaratma potansiyeline sahip katmanlı imalat, ürün tasarımı ve malzemelerinde benzeri görülmemiş bir esneklik sunar. Ayrıca Kİ, montajı yalnızca tek bir bileşenle mümkün kılarak diğer üretim yöntemlerinden ayrılmaktadır. Bu özellik, sensörü üretim sürecinde doğrudan entegre etmeyi mümkün kılmaktadır. Sensör entegrasyonu geleneksel üretim yöntemleriyle istenen mükemmellikte yapılamamaktadır. Katmanlı imalatla üretilen sensör entegreli parçalar geniş bir uygulama alanına sahiptir. Özellikle Kİ uygulamaları ile endüstri 4 çerçevesinde biyomedikal, otomotiv ve havacılık endüstrilerinde uygulanabilmesi ile kilit unsurların olabileceği yenilikçi bir çok alanda kullanım alanı oluşturabilecektir.
Anahtar Kelime: Endüstri 4 Dijitalizasyon

SENSOR APPLICATIONS with ADDITIVE MANUFACTURING in INDUSTRY 4.0

Öz:
This article focuses on sensor integration in additive manufacturing (AM). Additive manufacturing with the potential to revolutionize offers unprecedented flexibility in product design and materials. In addition, additive manufacturing differs from other manufacturing methods by enabling assembly with only one component. This feature makes it possible to directly integrate the sensor in the production process. Sensor integration cannot be performed properly with traditional production methods. Sensorintegrated parts produced by additive manufacturing have a wide range of applications. They are key elements in the biomedical, automotive and aerospace industries.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Derleme Erişim Türü: Erişime Açık
  • 1. Liu, C., Le Roux, L., Körner, C., Tabaste, O., Lacan, F., Bigot, S., “Digital twin-enabled collaborative data management for metal additive manufacturing systems”, Journal of Manufacturing Systems, 2020.
  • 2. Gibson, I., Rosen, D. W., Stucker, B., “Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing”, Springer, New York, 2010.
  • 3. Qin, Y., Qi, Q., Scott, PJ., Jiang, X., “Status, comparison, and future of the representations of additive manufacturing data”, Computer-Aided Design”, Cilt 111, Sayfa 44–64, 2019.
  • 4. Özsoy, K., Duman, B., İçkale Gültekin, D., “Metal Part Production with Additive Manufacturing for Aerospace and Defense Industry”, International Journal of Technological Sciences, Cilt 11, Sayı 3, Sayfa 201‐210, Aralık 2019.
  • 5. Lehmhus, D., Aumund-Kopp, C., Petzoldt, F., Godlinski, D., Haberkorn, A., Zöllmer., V., Busse, M., “Customized smartness: a survey on links between additive manufacturing and sensor integration”, Procedia Technology, Cilt 26, Sayfa 284-301, 2016.
  • 6. Çelebı̇, A., Korkmaz, A., Yılmaz, T., Tosun, H., "3 boyutlu yazıcı ile 6 eksenli robot kol tasarım ve imalatı", International Journal of 3D Printing Technologies and Digital Industry,Cilt 3, Sayı 3, Sayfa 269-278, 2019.
  • 7. Montazeri, M., “Smart additive manufacturing: in-process sensing and data analytics for online defect detection in metal additive manufacturing processes”, Doktora tezi, Nebraska Üniversitesi, Lincoln, 2019.
  • 8. Binder, M., Anstaett, C., Reisch, R., Schlick, G., Seidel, C., Reinhart, G., “Automated manufacturing of mechatronic parts by laser-based powder bed fusion”, Procedia Manufacturing, Cilt 18, Sayfa 12-19, 2018.
  • 9. Hossain, M.S., Gonzalez, J.A., Hernandez, R.M., Morton, P., Mireles, J., Choudhuri, A., Lin, Y., Wicker, R.B., “Smart parts fabrication using powder bed fusion additive manufacturing Technologies”, Additive Manufacturing, Cilt 10, Sayfa 58-66, 2016.
  • 10. Sehrt, J.T., Witt, G., “Part management by direct integration of RFID tags into beam melted parts”, RAPID 2011 Conference & Exposition, 2011.
  • 11. Sehrt, J.T., Witt, G., “Additive Manufacturing of smart parts and medical instruments, Proceedings of AEPR’12, 17th European Forum on Rapid Prototyping and Manufacturing”, 2012.
  • 12. Lachmayer, R., Lippert, R.B., “Additive Manufacturing Quantifiziert: Visionäre Anwendungen und Stand der Technik”, Springer Viewg, Berlin, 2017.
  • 13. MacDonald, E., Wicker, R., “Multiprocess 3D printing for increasing component functionality”, Science, Cilt 353, Sayı 6307, 2016.
  • 14. Gebauer, M., “High performance tooling for sheet metal forming by Laser Beam Melting”, Rapid.Tech – International Trade Show & Conference for Additive Manufacturing, Sayfa 140–150, 2017.
  • 15. Mathew, J., Hauser, C., Stoll, P., Kenel, C., Polyzos, D., Havermann, D., MacPherson, W.N., Hand, D.P., Leinenbach, C., Spierings, A., Koenig-Urban, K., Maier, R.R.J., “Integrating Fiber Fabry-Perot Cavity Sensor Into 3-D Printed Metal Components for Extreme High- Temperature Monitoring Applications”, IEEE Sensors Journal, Cilt 17, Sayı 13, Sayfa 4107–4114, 2017.
  • 16. Stoffregen, H.A., “Strukturintegration piezoelektrischer Vielschichtaktoren mittels selektiven Laserschmelzens”, Doktora Tezi, Darmstadt Teknik Üniversitesi, Darmstadt, 2015.
  • 17. Binder, M., Illgner, M., Anstaett, C., Kindermann, P., Kirchbichler, L., Seidel, C., “Automated manufacturing of sensor-monitored parts”, Laser Technik Journal, Cilt 15, Sayı 3, Sayfa 36-39, 2018.
  • 18. Töppel, T., Lausch, H., Brand, M., Hensel, E., Arnold, M., Rotsch, C., “Structural Integration of Sensors/Actuators by Laser Beam Melting for Tailored Smart Components”, JOM, Sayfa 321-327, 2018.
  • 19. Ehrenberg-Silies, S., Kind, S., Jetzke, T., Bovenschulte, M., “3D-Druck: Anwendungen und Potenziale”, https://vdivde-it.de/sites/default/files/document/additive-fertigungsverfahren-3d-druck-2017.pdf, Kasım 20, 2018.
  • 20. Binder, M., Kirchbichler, L., Seidel, C., Anstaett, C., Schlick, G., Reinhart, G., “Desing concepts fort he integration of electronic components into metal laser-based powder bed fusion parts”, Procedia CIRP, Cilt 81, Sayfa 992-997, 2019.
  • 21. Li, X., Prinz, F., Nelson, D., “Embedded sensors in layered manufacturing”, 2001.
  • 22. Mathew, J., Schneller, O., Polyzos, D., Havermann, D., Carter, R.M., MacPherson, W.N., Hand, D.P., Maier, R.R.J., “In-Fiber Fabry–Perot Cavity Sensor for High-Temperature Applications”, Journal of Lightwave Technology, Cilt 33, Sayı 12, Sayfa 2419–2425, 2015.
  • 23. Hehr, A., Norfolk, M., Wenning, J., Sheridan, J., Leser, P., Leser, P., Newman, J.A., “Integrating Fiber Optic Strain Sensors into Metal Using Ultrasonic Additive Manufacturing”, JOM, Cilt 70, Sayı 3, Sayfa 315– 320, 2018.
  • 24. Norfolk, M., Wenning, J., Hehr, A., Johnson, H., “3D Printing Embedded Sensors Using Solid State Welding”, Berlin, 2016.
  • 25. Stoll, P., Mathew, J., Spierings, A., Bauer, T., Maier, R., “Embedding fibre optical sensors into SLM parts”, 26th Annual International Solid Freeform Fabrication Symposium, Sayfa 1815-1825, 2016.
  • 26. Sehrt, J.T., “Möglichkeiten und Grenzen bei der generativen Herstellung metallischer Bauteile durch das Strahlschmelzverfahren”, Zugl.: Duisburg-Essen, Univ., Diss., Shaker, Aachen, 2010.
  • 27. Pille, C., “In-Process Embedding of Piezo Sensors and RFID Transponders into Cast Parts for Autonomous Manufacturing Logistics”, 4th European Conference & Ehibition on Integration Issues of Miniaturized Systems in Como Conference, Como, 2010.
  • 28. Binder, M., Anstaett, C., Horn, M., Herzer, F., Schlick, G., Seidel, C., Schilp, J., Reinhart, G., “Potentials and challenges of multi-material processing by laser-based powder bed fusion”, Solid Freedom Fabrication, Texas, 2018.
  • 29. Stoll, P., Leutenecker, B., Spiering, A., Klahn, C., Wegener, K., “Temperature Monitoring of a SLM Part with Embedded Sensor”, International Conference on Additive Manufacturing in Product and Applications – AMPA, Zurich, 2017.
  • 30. Vives, A. A., “Piezoelectric Transducers and Applications”, Springer, Berlin, 2004.
  • 31. Sirohi, J., Chopra, I., "Fundamental understanding of piezoelectric strain sensors", Journal of Intelligent Material System Structures, Cilt 11, Sayı 4, Sayfa 246-257, 2000.
  • 32. Webster, J. G., Eren, H., “Measurement, Instrumentation, and Sensors Handbook Spatial, Mechanical, Thermal, and Radiation Measurement”, CRC Press, Boca Raton, 2014.
  • 33. Li, X. C., Golnas A., Prinz, F. B., "Shape deposition manufacturing of smart metallic structures with embedded sensors", in Proceedings of SPIE - The International Society for Optical Engineering, 2000.
  • 34. Aguilera, E., Ramos, J., Espalin, D., Cedillos, F., Muse, D., Wicker, R., Macdonald, E., "3D printing of electro mechanical systems", in Proceedings of the Solid Freeform Fabrication Symposium, Austin, 2013.
  • 35. Pille, C., "In-process-embedding of piezo sensors and RFID transponders into cast parts for autonomous manufacturing logistics", Smart Systems Integration, Sayfa 1-10, 2010.
  • 36. Rai, R., Campbell M., Wood, K., "Extracting product performance by embedding sensors in SFF prototypes", in Proceedings of International Solid Freeform Fabrication Symposium, Austin, 2004.
  • 37. Wuest, T., Hribernik, K., Thoben, K-D., “Accessing servitisation potential of PLM data by applying the product avatar concept”, Production Planning & Control, Cilt 26, Sayı 14, Sayfa 1198-1218, 2015.
  • 38. Bosse, S., Lechleiter, A., “A hybrid approach for Structural Monitoring with self-organizing multi-agent systems and inverse numerical methods in material-embedded sensor networks”, Mechatronics, Cilt 34, Sayfa 12-37, 2016.
  • 39. Boll, D., Schubert, K., Brauner, C., Lang, W., “Miniaturized Flexible Interdigital Sensor for In Situ Dielectric Cure Monitoring of Composite Materials”, IEEE Sensors Journal, Cilt 14, Sayı 7, Sayfa 2193-2197, 2014
  • 40. Lehmhus, D., Wuest, T., Wellsandt, S., Bosse, S., Kaihara, T., Thoben, K-D., Busse, M., “Cloud-based Automated Design and Additive Manufacturing: A Usage Data-Enabled Paradigm Shift”, Sensors, Cilt 15, Sayı 12, Sayfa 32079-32122, 2015.
  • 41. Espalin, D., Muse, DW., MacDonald, E., Wicker, RB., “3D Printing multifunctionality: structures with electronics”, Internatiol Journal of Advanced Manufacturing Technology, Cilt 72, Sayfa 963-978, 2014.
  • 42. http://www.stratasys.com/3d-printers/technologies/polyjet-technology, 29 Şubat, 2016.
  • 43. Lu, Y., Vatani, M., Kim, H-C., Lee, R-C., Choi, J-W., “Development of direct printing/curing process for 3D structural electronics”, Proceedings of the ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, 13-21 Kasım, 2013.
  • 44. Maiwald, M., Werner, C., Zoellmer, V., Busse, M., “INKtelligent printing® for sensorial applications”, Sensor Review, Cilt 30, Sayı 1, Sayfa 19-23, 2010.
  • 45. Maiwald, M., Werner, C., Zoellmer, V., Busse, M., “INKtelligent printed strain gauges”, Sensors and Actuators A: Physical, Cilt 162, Sayı 2, Sayfa 198-201, 2010.
  • 46. Pal, E., Zöllmer, V., Lehmhus, D., Busse, M., “Synthesis of Cu0.55Ni0.44Mn0.01 alloy nanoparticles by solution combustion method and their application in aerosol printing”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Cilt 384, Sayı 1-3, Sayfa 661-667, 2011.
  • 47. Pal, E., Kun, R., Schulze, C., Zöllmer, V., Lehmhus, D., Bäumer, M., Busse, M., “Composition-dependent sintering behaviour of chemically synthesised CuNi nanoparticles and their application in aerosol printing for preparation of conductive microstructures”, Colloid and Polymer Science, Cilt 290, Sayı 10, Sayfa 941- 952, 2012.
  • 48. Wicker, RB., Medina, F., MacDonald, E., Muse, DW., Espalin, D., “Methods and systems for embedding filaments in 3D structures, structural components, and structural electronic, electromagnetic and electromechanical components/devices”, 2013.
  • 49. Bosse, S., Lehmhus, D., Lang, W., Busse, M., “Material-integrated intelligent systems: Technology and applications”, Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim, 2018.
  • 50. Hoerber, J., Glasschroeder, J., Pfeffer, M., Schilp, J., Zaeh, M., Franke, J., “Approaches for Additive Manufacturing of 3D Electronic Applications”, Procedia CIRP, Cilt 17, Sayfa 806–811, 2014.
  • 51. Montazeri, M., Yavari, R., Rao, P., Boulware, P., "In-Process Monitoring of Material Cross-Contamination Defects in Laser Powder Bed Fusion", Journal of Manufacturing Science and Engineering, Cilt 140, Sayı 11, Sayfa 111001-111020, 2018.
  • 52. Grasso, M., Colosimo, B. M., "Process defects and in situ monitoring methods in metal powder bed fusion: a review", Measurement Science and Technology, Cilt 28, Sayı 4, Sayfa 1-25, 2017.
  • 53. Zarreh, A., Saygin, C., Wan, H., Lee, Y., Bracho, A., Nie, I., "Cybersecurity Analysis of Smart Manufacturing System Using Game Theory Approach and Quantal Response Equilibrium", Procedia Manufacturing, Cilt 17, Sayfa 1001-1008, 2018.
  • 54. Malekipour, E., El-Mounayri, H., "Common defects and contributing parameters in powder bed fusion AM process and their classification for online monitoring and control: a review", The International Journal of Advanced Manufacturing Technology, Cilt 95, Sayı 1, Sayfa 527-550, 2018.
  • 55. Malekipour, E., Tovar, A., El-Mounayri, H., "Heat Conduction and Geometry Topology Optimization of Support Structure in Laser-Based Additive Manufacturing", Springer International Publishing, Sayfa 17- 27, 2018.
  • 56. Seifi, M., Gorelik, M., Waller, J., Hrabe, N., Shamsaei, N., Daniewicz, S., Lewandowski, J. J., "Progress Towards Metal Additive Manufacturing Standardization to Support Qualification and Certification", JOM, Cilt 69, Sayı 3, Sayfa 439-455, 2017.
  • 57. Norfolk, M., “Fabrisonic-building fiber optic strain sensors into metal components”, https://additivemanufacturing.com/2018/02/26/fabrisonic-building-fiber-optic-strain-sensors-into-metalcomponents/, Şubat 26, 2018.
  • 58. White, D., “Ultrasonic consolidation of aluminum tooling”, Advanced Materials Processes, Cilt 161, Sayı 1, Sayfa 64–65, 2003.
  • 59. Mukherjee, T., DebRoy, T., “A digital twin for rapid qualification of 3D printed metallic components”, Applied Materials Today, Cilt 14, Sayfa 59–65, 2019.
  • 60. Knapp, GL., Mukherjee, T., Zuback, JS., Wei, HL., Palmer, TA., De, A., DebRoy, T., “Building blocks for a digital twin of additive manufacturing”, Acta Materialia, Cilt 135, Sayfa 390–399, 2017.
APA Çelebi A, Koda D (2021). ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. , 85 - 97. 10.46519/ij3dptdi.837635
Chicago Çelebi Ahu,Koda Damla Yağmur ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. (2021): 85 - 97. 10.46519/ij3dptdi.837635
MLA Çelebi Ahu,Koda Damla Yağmur ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. , 2021, ss.85 - 97. 10.46519/ij3dptdi.837635
AMA Çelebi A,Koda D ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. . 2021; 85 - 97. 10.46519/ij3dptdi.837635
Vancouver Çelebi A,Koda D ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. . 2021; 85 - 97. 10.46519/ij3dptdi.837635
IEEE Çelebi A,Koda D "ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI." , ss.85 - 97, 2021. 10.46519/ij3dptdi.837635
ISNAD Çelebi, Ahu - Koda, Damla Yağmur. "ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI". (2021), 85-97. https://doi.org/10.46519/ij3dptdi.837635
APA Çelebi A, Koda D (2021). ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. International Journal of 3D Printing Technologies and Digital Industry, 5(1), 85 - 97. 10.46519/ij3dptdi.837635
Chicago Çelebi Ahu,Koda Damla Yağmur ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. International Journal of 3D Printing Technologies and Digital Industry 5, no.1 (2021): 85 - 97. 10.46519/ij3dptdi.837635
MLA Çelebi Ahu,Koda Damla Yağmur ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. International Journal of 3D Printing Technologies and Digital Industry, vol.5, no.1, 2021, ss.85 - 97. 10.46519/ij3dptdi.837635
AMA Çelebi A,Koda D ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. International Journal of 3D Printing Technologies and Digital Industry. 2021; 5(1): 85 - 97. 10.46519/ij3dptdi.837635
Vancouver Çelebi A,Koda D ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI. International Journal of 3D Printing Technologies and Digital Industry. 2021; 5(1): 85 - 97. 10.46519/ij3dptdi.837635
IEEE Çelebi A,Koda D "ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI." International Journal of 3D Printing Technologies and Digital Industry, 5, ss.85 - 97, 2021. 10.46519/ij3dptdi.837635
ISNAD Çelebi, Ahu - Koda, Damla Yağmur. "ENDÜSTRİ 4.0 ÇERÇEVESİNDE KATMANLI İMALATTA SENSÖR UYGULAMALARI". International Journal of 3D Printing Technologies and Digital Industry 5/1 (2021), 85-97. https://doi.org/10.46519/ij3dptdi.837635
Sayfa Oluşturulma Tarihi
17-04-2024 20:41

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları