Yıl: 2021 Cilt: 12 Sayı: 2 Sayfa Aralığı: 39 - 48 Metin Dili: İngilizce DOI: 10.20528/cjcrl.2021.02.001 İndeks Tarihi: 04-11-2021

Mechanical properties and freeze-thaw resistancesof bronze-concrete composites

Öz:
Studies in the literature show that the physical and mechanical properties of concrete could be improved by the incorporation of different kinds of industrial waste, including waste tire rubber and tire steel. Recycling of waste is important for economic gain and to curb environmental problems. In this study, finely ground CuAl10Ni bronze is used to improve the physical and mechanical properties, and freeze-thaw resistances of C30 concrete. The density, cold crushing strength, 3-point bending strength, elastic modulus, toughness, and freeze-thaw resistances of concrete are determined. In addition, the Schmidt Rebound Hammer (SRH) and the ultrasonic pulse velocity (UPV) tests, which are non-destructive test methods, are applied. SEM/EDX analyses are also carried out. It is noted that a more compacted structure of concrete is achieved with the addition of bronze sawdust. Then higher density and strength values are obtained for concretes that are produced by bronze addition. In addition, concretes including bronze sawdust generally show higher toughness due to high plastic energy capacities than pure concrete.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Balaguru P, Ramakrishnan V (1987). Comparison of slump cone and VB tests as measures of workability for fiber reinforced and plain concrete. Cement Concrete Aggregates, 9(1), 3-11.
  • Bignozzi MC, Sandrolini F (2006). Tyre rubber waste recycling in selfcompacting concrete. Cement and Concrete Research, 36(4), 735- 739.
  • Gemi L, Yazman S, Uludağ M, Dispinar D, Tiryakioğlu M (2017). The effect of 0.5 wt% additions of carbon nanotubes & ceramic nanoparticles on tensile properties of epoxy-matrix composites: a comparative study. Materials Science and Nanotechnology, 1(2), 15-22.
  • Gemi L, Köroğlu MA, Ashour A (2018). Experimental study on compressive behavior and failure analysis of composite concrete confined by glass/epoxy ±55° filament wound pipes. Composite Structures, 87, 157-68.
  • Gemi L, Aksoylu C, Yazman Ş, Özkılıç YO, Arslan MH (2019). Experimental investigation of shear capacity and damage analysis of thinned end prefabricated concrete purlins strengthened by CFRP composite. Composite Structures, 229, 111399.
  • Gemi L, Morkavuk S, Köklü U, Yazman Ş (2020). The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-2 damage analysis and surface quality. Composite Structures, 235, 111737.
  • Lee BI, Burnett L, Miller T, Postage B, Cuneo J (1993). Tyre rubber/cement matrix composites. Journal of Materials Science Letters, 12(13), 967-968.
  • Li Z, Li F, Li JSL (1998). Properties of concrete incorporating rubber tyre particles. Magazine of Concrete Research, 50(4), 297-304.
  • Madenci E, Özkılıç YO, Gemi L (2020). Experimental and theoretical investigation on flexure performance of pultruded GFRP composite beams with damage analyses. Composite Structures, 242, 112162.
  • Nagrockiene D, Girskas G, Skripkiunas G (2017). Properties of concrete modified with mineral additives. Construction and Building Materials, 135, 37-42.
  • Nilson AH, Winter G (1991). Design of concrete structures. MCGrawHill, Inc., 11th Edition, Singapore.
  • Ozbay NS (2018). İnce Öğütülmüş Bronz, Tel ve Lastik Atıkları ile Üretilen Betonun Soğuk Basma Mukavemeti, Korozyon ve DonmaÇözülme Direncinin Araştırılması. Graduate Thesis, Necmettin Erbakan University, Konya, Turkey. (in Turkish)
  • Özkılıç YO, Madenci E, Gemi L (2020). Tensile and compressive behaviors of the pultruded GFRP Lamina. Turkish Journal of Engineering (TUJE), 4, 169-175.
  • Polat R, Demirboğa R, Karakoç MB, Türkmen I (2010). The influence of lightweight aggregate on the physico-mechanical properties ofconcrete exposed to freeze–thaw cycles. Cold Regions Science and Technology, 60(1), 51-56.
  • Raghavan D, Huynh H, Ferraris CF (1998). Workability, mechanical properties and chemical stability of a recycled tyre rubber-filled cementitious composite. Journal of Materials Science, 33, 1745-1752.
  • Rahal K (2007). Mechanical properties of concrete with recycled coarse aggregate. Building and Environment, 42, 407-415.
  • Ramakrishnan V, Coyle WV (1983). Steel fiber reinforced super-plasticized concretes for rehabilitation of bridge decks and highway pavements. Final Report to U.S. Department of Transportation, DOT/RSPA/DMA-50, 84(2), p. 408.
  • Segre N, Joekes I (2000). Use of tire rubber particles as addition to cement paste. Cement and Concrete Research, 30(9), 1421-1425.
  • Siddique R, Schutter G, Noumowe A (2007). Effect of used-foundry sand on the mechanical properties of concrete. Construction and Building Materials, 23(2), 976-980.
  • Sun W, Mu R, Luo X, Changwen M (2002). Effect of chloride salt, freeze– thaw cycling and externally applied load on the performance of the concrete. Cement and Concrete Research, 32(12), 1859-1864.
  • Topçu İB (1995). The properties of rubberized concretes. Cement and Concrete Research, 25(2), 304-331.
APA Bahtlı T, ÖZBAY N (2021). Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. , 39 - 48. 10.20528/cjcrl.2021.02.001
Chicago Bahtlı Tuba,ÖZBAY Nesibe Sevde Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. (2021): 39 - 48. 10.20528/cjcrl.2021.02.001
MLA Bahtlı Tuba,ÖZBAY Nesibe Sevde Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. , 2021, ss.39 - 48. 10.20528/cjcrl.2021.02.001
AMA Bahtlı T,ÖZBAY N Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. . 2021; 39 - 48. 10.20528/cjcrl.2021.02.001
Vancouver Bahtlı T,ÖZBAY N Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. . 2021; 39 - 48. 10.20528/cjcrl.2021.02.001
IEEE Bahtlı T,ÖZBAY N "Mechanical properties and freeze-thaw resistancesof bronze-concrete composites." , ss.39 - 48, 2021. 10.20528/cjcrl.2021.02.001
ISNAD Bahtlı, Tuba - ÖZBAY, Nesibe Sevde. "Mechanical properties and freeze-thaw resistancesof bronze-concrete composites". (2021), 39-48. https://doi.org/10.20528/cjcrl.2021.02.001
APA Bahtlı T, ÖZBAY N (2021). Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. Challenge Journal of Concrete Research Letters, 12(2), 39 - 48. 10.20528/cjcrl.2021.02.001
Chicago Bahtlı Tuba,ÖZBAY Nesibe Sevde Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. Challenge Journal of Concrete Research Letters 12, no.2 (2021): 39 - 48. 10.20528/cjcrl.2021.02.001
MLA Bahtlı Tuba,ÖZBAY Nesibe Sevde Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. Challenge Journal of Concrete Research Letters, vol.12, no.2, 2021, ss.39 - 48. 10.20528/cjcrl.2021.02.001
AMA Bahtlı T,ÖZBAY N Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. Challenge Journal of Concrete Research Letters. 2021; 12(2): 39 - 48. 10.20528/cjcrl.2021.02.001
Vancouver Bahtlı T,ÖZBAY N Mechanical properties and freeze-thaw resistancesof bronze-concrete composites. Challenge Journal of Concrete Research Letters. 2021; 12(2): 39 - 48. 10.20528/cjcrl.2021.02.001
IEEE Bahtlı T,ÖZBAY N "Mechanical properties and freeze-thaw resistancesof bronze-concrete composites." Challenge Journal of Concrete Research Letters, 12, ss.39 - 48, 2021. 10.20528/cjcrl.2021.02.001
ISNAD Bahtlı, Tuba - ÖZBAY, Nesibe Sevde. "Mechanical properties and freeze-thaw resistancesof bronze-concrete composites". Challenge Journal of Concrete Research Letters 12/2 (2021), 39-48. https://doi.org/10.20528/cjcrl.2021.02.001