THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD

G, Purushotham; Suresh, R; J, Dr. Kumaraswamy; Kumar, Vijaya

THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD

J. Kumaraswamy, (Department of Mechanical Engineering, R.L. Jalappa Institute of Technology, Doddaballapur-561203, Karnataka, India)

Vijaya Kumar, (Department of Mechanical Engineering, UBDT College of Engineering, Davangere-577004, Karnataka, India)

G. Purushotham, (Department of Aeronautical Engineering, Mangalore Institute of Technology &Engineering, Moodabidre-574225, Karnataka, India)

R. Suresh (Department Mechanical and Manufacturing Engineering, M.S. Ramaiah University of Applied Sciences, Bangalore-560058, India)

Journal of Thermal Engineering

0 0

Yıl: 2021 Cilt: 7 Sayı: 3 Sayfa Aralığı: 415 - 428 Metin Dili: İngilizce İndeks Tarihi: 14-10-2021

THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD

Öz:

The current research aims to develop a hybrid metal matrix composition that focuses on the nickel alloy andits thermal properties. The different temperature ranges are used to analyze the function of MMCs such as thermalconductivity and coefficient of thermal expansion. This paper addresses the thermal properties obtained from a seriesof Al2O3 and TiO2 reinforced nickel alloy (ASTM A494 M), with dispersed particle sizes ranging from 40-45 micronsof Al2O3 and 1-5 microns of TiO2. The quantity of the Al2O3 addition varies from 3-12 weight % and 9 weight % ofTiO2 unvarying in the stages of three weight percentages. The microstructural investigation states that, because of thestir casting on the vortex, the distribution of reinforcements is uniform with a strong bond. With the increase in Al2O3and TiO2 content in HMMCs, a thermal property is found to diminish significantly. The results indicate that thereinforcements have a major effect on the thermal expansion coefficient as well as on the thermal conductivity of thehybrid composites being produced. Various types of microstructural have been performed using electron microscopyscanning and EDAX. The limited examination of the exhaust valve of the I C engine shows that the nickel combinationcomposites can be utilized as a substitute for the present valve material (Ni-Cr alloy steel). All tests acted in thisinvestigation meet ASTM specifications.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

[1] Joel Hemanth, Development of Nickel Alloy Reinforced with Fused SiO2 Chilled Composites and Evaluation of Thermal Properties (Thermal Conductivity & Coefficient of Thermal Expansion) and Temperature Distribution by Finite Element Analysis (FEA). Open Journal of Composites Materials. 2017; 7(5): 251-264.
[2] Purushotham G, Joel Hemanth. Influence of fused Silica and chills incorporation on Corrosion, Thermal and Chemical composition of ASTM A 494 M Grade Nickel alloy. IOP Conf. Ser.: Materials Science and Engineering. 2016; 149-012042: 1-13. https:// doi.org/10.1088/1757-899X/149/1/012042
[3] Trzepiecinski T, Lemu HG. Frictional Resistances of AMS5599 Nickel-based Alloy at High Pressure Conditions IOP Conf. Ser.: Materials Science and Engineering. 2018; 381-012159:1-7. https:// doi.org/10.1088/1757-899X/381/1/012159.
[4] Joel Hemanth, Corrosion Behavior of Nickel Alloy (ASTM A 494 M) Reinforced with Fused SiO2 Chilled Metal Matrix Composites (MMCs) for Marine Applications. Materials Science and Engineering. 2017; 225- 012192:1-7. https:// doi.org/10.1088/1757-899X/225/1/012192
[5] Purushotham G, Joel Hemanth. Study of Physico-Chemical Properties of Monel M-35-1 Nickel Alloy-Fused Silica Metal Matrix Composite for Marine Application. Indian Journal of Advances in Chemical Science. 2016; 4(3): 235-240.
[6] Nelson AT., White JT, Anderson DA.Thermal Expansion, Heat Capacity and Thermal Conductivity of Nickel Ferrite (NiFe2O4). The American Ceramic Society, 2014; 4: 1-7. https://doi.org/10.1111/jace.12901
[7] Zielińska M, Yavorska M, Poręba M, Sieniawski J. Thermal properties of cast nickel based superalloys. Archives of Materials Science and Engineering. 2010; 44(1): 35-38.
[8] El-Bagoury N, Mohammed A. Amin, Mohsen Qhatani, Effect of Various Heat Treatment Conditions on Microstructure, Mechanical Properties and Corrosion Behavior of Ni-base Superalloys. Int. J. Electrochem. Sci., 2011; 6(12): 6718-6732.
[9] Meenu Srivastava, Srinivasan A, William Grips V K. Influence of Zirconia Incorporation on the Mechanical and Chemical Properties of Ni-Co Alloys. American Journal of Materials Science. 2011; 2:113-122. https:// doi.org/10.5923/j.materials.20110102.19
[10] Durul Ulutan, Tuğrul Özel. Machining-Induced Surface Integrity in Titanium and Nickel alloys: A Review. International Journal of Machine Tools & Manufacture. 2011; 51:250–280. https:// doi.org/10.1016/j.ijmachtools.2010.11.003
[11] Calin, Recep, Muharrem Pul, and Zühtü Onur Pehlivanli. The effect of reinforcement volume ratio on porosity and thermal conductivity in Al-Mgo composites. Materials Research. 2012; 15(6): 1057-1063.
[12] X D Liu, J S Zhang, X M Cao, H Zhang. Finite element simulation of the thermal properties of particulate and continuous network-reinforced metal-matrix composites. Proc.Imech, Part B: Journal of Engineering Manufacture, 2005; 219(1): 111-121. https://doi.org/10.1243/095440505X8055
[13] Zahra Fattahi, Seyed Abdolkarim Sajjadi, Abolfazl Babakhani, Farhad Saba. Ni–Cr matrix composites reinforced with nano and micron sized surface-modified zirconia: Synthesis, microstructure and mechanical properties. Journal of Alloys and Compounds. 2020;817:15275. https://doi.org/10.1016/j.jallcom.2019.152755
[14] Cem Okumus S, Serdar Aslan. Ramazan Karslioglu, Deniz Gultekin, Hatem Akbulut. Thermal Expansion and Thermal Conductivity Behaviors of Al-Si/SiC/graphite Hybrid Metal Matrix Composites (MMCs). Materials Science (Medziagotyra). 2012; 18(4):341-346. http://dx.doi.org/10.5755/j01.ms.18.4.3093
[15] Davis LC, Artz BE. Thermal conductivity of metal matrix composites. Journal of Applied Physics. 1995; 77 (10): 4954-4960.
[16] Matine A, Boyard N, Cartraud P, Legrain G, Jarny Y. Thermal properties of composite materials: effective conductivity tensor and edge effects. J. Phy. Conf. Ser., 2012; 395-012014:1-9. doi:10.1088/1742- 6596/395/1/012014
[17] Sunil Kumar Reddy K, Kannan M, Karthikeyan R, Laxman B. Evaluation of thermal and mechanical properties of Al7475 alloy reinforced with SiC and graphite. Materials Today: Proc. 2020; 26(2): 2691-2696. https://doi.org/10.1016/j.matpr.2020.02.566

APA	Suresh R, J D, Kumar V, G P (2021). THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. , 415 - 428.
Chicago	Suresh R,J Dr. Kumaraswamy,Kumar Vijaya,G Purushotham THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. (2021): 415 - 428.
MLA	Suresh R,J Dr. Kumaraswamy,Kumar Vijaya,G Purushotham THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. , 2021, ss.415 - 428.
AMA	Suresh R,J D,Kumar V,G P THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. . 2021; 415 - 428.
Vancouver	Suresh R,J D,Kumar V,G P THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. . 2021; 415 - 428.
IEEE	Suresh R,J D,Kumar V,G P "THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD." , ss.415 - 428, 2021.
ISNAD	Suresh, R vd. "THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD". (2021), 415-428.

APA	Suresh R, J D, Kumar V, G P (2021). THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. Journal of Thermal Engineering, 7(3), 415 - 428.
Chicago	Suresh R,J Dr. Kumaraswamy,Kumar Vijaya,G Purushotham THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. Journal of Thermal Engineering 7, no.3 (2021): 415 - 428.
MLA	Suresh R,J Dr. Kumaraswamy,Kumar Vijaya,G Purushotham THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. Journal of Thermal Engineering, vol.7, no.3, 2021, ss.415 - 428.
AMA	Suresh R,J D,Kumar V,G P THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. Journal of Thermal Engineering. 2021; 7(3): 415 - 428.
Vancouver	Suresh R,J D,Kumar V,G P THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD. Journal of Thermal Engineering. 2021; 7(3): 415 - 428.
IEEE	Suresh R,J D,Kumar V,G P "THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD." Journal of Thermal Engineering, 7, ss.415 - 428, 2021.
ISNAD	Suresh, R vd. "THERMAL ANALYSIS OF NICKEL ALLOY/AL2O3/TIO2 HYBRID METAL MATRIX COMPOSITE IN AUTOMOTIVE ENGINE EXHAUST VALVE USING FEA METHOD". Journal of Thermal Engineering 7/3 (2021), 415-428.