Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates

BAĞCI, M.; TEKİN, M.; DEMİR, A.; TURALI, T.; NOHUTÇU, H.

Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates

M. TEKİN, (Celal Bayar Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Manisa, Türkiye)

A. DEMİR, (Celal Bayar Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Manisa, Türkiye)

T. TURALI, (Celal Bayar Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Manisa, Türkiye)

H. NOHUTÇU, (Celal Bayar Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Manisa, Türkiye)

M. BAĞCI (Celal Bayar Üniversitesi, Mühendislik Fakültesi, İnşaat Mühendisliği Bölümü, Manisa, Türkiye)

Mathematical and Computational Applications

0 0

Yıl: 2011 Cilt: 16 Sayı: 4 Sayfa Aralığı: 868 - 878 Metin Dili: İngilizce İndeks Tarihi: 29-07-2022

Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates

Öz:

The topic of this study is to strengthen cracked beams with prefabricated RCrectangular cross sectional plates. The damaged beams were repaired by epoxy basedglue. The repaired beams were strengthened using prefabricated RC rectangular crosssectional plates. The strengthening plates were bonded to the bottom face of the beamsby anchorage rods and epoxy. The strengthened beams were incrementally loaded up tomaximum load capacities. The experimental results were satisfactory since the loadcarrying capacities of damaged beams were increased approximately 47% due tostrengthening. The post elastic strength enhancement and the displacement ductility ofall the beams are researched during the experiments. The experimental program wassupported by a three dimensional nonlinear finite element analysis. The experimentalresults were compared with the results obtained from the beam modeled with ANSYSfinite element program.

Anahtar Kelime:

Konular: Matematik

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

1. Swamy R.N., Jones R. and Charif A. (1989a). The effect of external plate reinforcement on the strengthening of structurally damaged RC beams. Structural Engineer, 67(3): 45 56.
2. Barnes R.A., Baglin P.S., Mays G.C., Subedi N.K. (2001). External steel plate systems for the shear strengthening of reinforced concrete beams. Engineering Structures, 23:1162 1176.
3. Arslan G., Sevuk F., Ekiz I. (2008). Steel plate contribution to load carrying capacity of retrofitted RC beams. Construction and Building Materials, 22:143 153.
4. Swamy R.N., Jones R., Bloxham J.W. (1987b). Structural behaviour of reinforced concrete beams strengthened by epoxy bonded steel plates. Structural Engineer, 65(2):59 68.
5. Adhikary B.B., Mutsuyoshi, H. (2006(. Shear strengthening of RC beams with web
bonded continuous steel plates. Construction and Building Materials, 20:296 307.
6. Su, R.K.L., Siu W.H., Smith S.T. (2010). Effects of bolt plate arrangements on steel plate strengthened reinforced concrete beams. Engineering Structures, 32:1769 1778.
7. El-Mihilmy M.T. and Tedesco, W.J. (2000). Analysis of reinforced concrete beams strengthened with FRP laminates. Journal of Structural Engineering, (ASCE)126(6): 684 691.
8. Buyukozturk, O. and Karaca, E. (2002). Characterization and modeling of debonding in RC beams strengthened with FRP composites. In: Proceedings 15.ASCE Engineering Mechanics Conference, 2 5 June 2002. Columbia Univ., New York, N.Y.
9. Lu X.Z., Teng J.G., Ye L.P. and Jiang J.J. (2005). Bond Slip Models for FRP Sheets/Plates Bonded to Concrete. Engineering Structures, 27(6):920 937.
10. Ozcan M., Bayraktar A., Sahin A., Haktanır T., Turker T. (2009). Experimental and finite element analysis on the steel fiber reinforced concrete (SFRC) beams ultimate behavior. Construction and Buildings Materials, 23:1064 1077.
11. De Lorenzis, L. and Teng, J. G. (2007). Near Surface Mounted FRP Reinforcement: An Emerging Technique for Strengthening Structures. Composites Part B: Engineering, 38(2): 119 143.
12. Eshwar N., Nanni A., and Ibell T.J. (2004). Effectiveness of CFRP Strengthening on Curved Soffit RC Beams. Advances in Structural Engineering, 8(1):55 68.
13. Ceroni F. (2010). Experimental performances of RC beams strengthened with FRP materials. Construction and Building Materials, 24:1547–1559.
14. Barbosa A.F. and Ribeiro G.O. (2004). Analysis of reinforced concrete structures using ANSYS nonlinear concrete model. Computational Mechanics, 1(8):1 7.
15. Pham H., Al-Mahaidi R., Sauma V. (2006). Modeling of CFRP concrete bond using smeared and discrete cracks. Composite Structures, 75:145 150.
16. Hawileh R.A., Naser M., Zaidan W., Rasheed H.A. (2009). Modeling of insulated CFRP strengthened reinforced concrete T beam exposed to fire. Engineering Structures, 31:3072 3079.
17. Buyukkaragoz, A. (2010). Finite element analysis of the beam strengthened with prefabricated reinforced concrete plate. Scientific Research and Essays, 5(6):533 544.
18. Yang ZJ, Chen JF, Proverbs D. (2003). Finite element modeling of concrete cover separations failure in FRP plated beams. Construct Build Mater, 17(1):3–13.
19. Ye JQ. (2001). Interfacial shear transfer of RC beams strengthened by bonded composite plates. Cem Concr Comp, 23(4–5):411–7.
20. ANSYS. (2007). Finite element computer program. Version 11. Canonsburg (PA): ANSYS, Inc.
21. Hognestad E. (1951). A study of combined bending and axial load in RC members. Univ. Illinois Eng. Exp. Stat. Bull, 399(2):36 57.
22. ACI Committee 318. Building code for structural concrete (318R 2002) and commentary (318R 2002). ACI, Farmington Hills, MI, 2002.
23. Willam K.J. and Warnke E.P. (1974). Constitutive model for triaxial behavior of concrete. In: Proceedings of the International association of bridge and structural engineering conference 1974; 174 191.

APA	TEKİN M, DEMİR A, TURALI T, NOHUTÇU H, BAĞCI M (2011). Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. , 868 - 878.
Chicago	TEKİN M.,DEMİR A.,TURALI T.,NOHUTÇU H.,BAĞCI M. Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. (2011): 868 - 878.
MLA	TEKİN M.,DEMİR A.,TURALI T.,NOHUTÇU H.,BAĞCI M. Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. , 2011, ss.868 - 878.
AMA	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. . 2011; 868 - 878.
Vancouver	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. . 2011; 868 - 878.
IEEE	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M "Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates." , ss.868 - 878, 2011.
ISNAD	TEKİN, M. vd. "Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates". (2011), 868-878.

APA	TEKİN M, DEMİR A, TURALI T, NOHUTÇU H, BAĞCI M (2011). Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. Mathematical and Computational Applications, 16(4), 868 - 878.
Chicago	TEKİN M.,DEMİR A.,TURALI T.,NOHUTÇU H.,BAĞCI M. Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. Mathematical and Computational Applications 16, no.4 (2011): 868 - 878.
MLA	TEKİN M.,DEMİR A.,TURALI T.,NOHUTÇU H.,BAĞCI M. Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. Mathematical and Computational Applications, vol.16, no.4, 2011, ss.868 - 878.
AMA	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. Mathematical and Computational Applications. 2011; 16(4): 868 - 878.
Vancouver	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates. Mathematical and Computational Applications. 2011; 16(4): 868 - 878.
IEEE	TEKİN M,DEMİR A,TURALI T,NOHUTÇU H,BAĞCI M "Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates." Mathematical and Computational Applications, 16, ss.868 - 878, 2011.
ISNAD	TEKİN, M. vd. "Strengthening of RC beams with prefabricated RC rectangular cross-sectional plates". Mathematical and Computational Applications 16/4 (2011), 868-878.