Effectiveness of high performance mortar reinforced with fibers as a repair material

Eethar Thanon DAWOOD, (Northern Technical University, Technical College of Mosul, Department of Building and Construction Engineering, Mosul, Iraq)
Tamara Waleed GANIM (Northern Technical University, Technical College of Mosul, Department of Building and Construction Engineering, Mosul, Iraq)
Challenge Journal of Concrete Research Letters
7 0
Yıl: 2017 Cilt: 8 Sayı: 2 Sayfa Aralığı: 29 - 47 Metin Dili: İngilizce DOI: 10.20528/cjcrl.2017.02.001 İndeks Tarihi: 06-07-2020

Effectiveness of high performance mortar reinforced with fibers as a repair material

Öz:
The present work deals with engineering properties of high performance mortar(HPM) to be used as a repair material. The experimental study was conducted onHPM reinforced with mono steel fibers and hybrid fibers consist of steel and polypropylene fibers. The economical efficiency of the designed mono and hybrid fibersreinforced mortar were presented. The results indicate that the hybridization of1.8% steel fibers and 0.2% polypropylene fibers is very beneficial to decrease theproduction cost of fiber reinforced mortar for large scale construction project applications. The combined system of substrate concrete with different mixes of HPM wasused to study its bond strength properties. The experimental tests are: two-part bondstrength tests in additional to three part-bond strength tests. It was found that HPMreinforced by hybrid fibers has the best performance when two-part bond strengthis required. On the other hand, in three parts bonding, the combined system of NCwith epoxy has the best bond strength while HPM reinforced fibers show a betterfailure mode.
Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
  • Abd ElAty MA (2013). Influence of bending deflection rate on properties of fibrous mortar. HBRC Journal, 9, 27–35.
  • ASTM C1018 (2002). Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading). Annual book of ASTM Standards.
  • ASTM C109 (2002). Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). Annual book of ASTM Standards.
  • ASTM C230 (2002). Standard Specification for Flow Table for Use in Tests of Hydraulic Cement. Annual book of ASTM Standards.
  • ASTM C348 (2002). Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. Annual book of ASTM Standards.
  • ASTM C496 (2002). Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. Annual book of ASTM Standards.
  • ASTM C642 (2002). Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. Annual book of ASTM Standards.
  • ASTM C78 (2002). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). Annual book of ASTM Standards.
  • ASTM C882 (2002). Standard Test Method for Bond Strength of EpoxyResin Systems Used With Concrete by Slant Shear. Annual book of ASTM Standards.
  • Aydin A (2007). Self compactability of high volume hybrid fiber reinforced concrete. Construction and Building Materials, 21(6), 1149- 1154.
  • Balaguru PN, Shah SP (1992). Fiber-Reinforced Cement Composites. McGraw-Hill Inc., New York.
  • Balendran R, Zhou F, Nadeem A, leung AYT (2002). Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete. Building and Environment, 37, 1361-1367.
  • Banthia N, Sappakittipakorn M (2007). Toughness enhancement in steel fiber reinforced concrete through fiber hybridization. Cement and Concrete Research, 37(9), 1366-1372.
  • Bendjillalia K, Gouala MS, Chemrouk M, Damenea Z (2011). Study of the reinforcement of limestone mortars by polypropylene fibers waste. Physics Procedia, 21, 42–46.
  • Bentur A, Mindess S (1990). Fiber Reinforced Cementitious Composites. Elsevier Applied Science, London.
  • Campello E, Pereira MV, Darwisha F (2014). The effect of short metallic and polymeric fiber on the fracture behavior of cement mortar. Procedia Materials Science, 3, 1914–1921.
  • Chan YW, Chu SH (2004). Effect of silica fume on steel fiber bond characteristics in reactive powder concrete. Cement and Concrete Research, 34(7), 1167–1172.
  • Chynoweth G, Stankie RR, Allen WL, Anderson RR, Babcock WN, Barlow P (1996). Concrete Repair Guide. ACI Committee, Concrete Repair Manual, 546, 287-327.
  • Dawood ET, Ramli M (2010). Development of high strength flowable mortar with hybrid fibre. Construction and Building Materials, 24, 1043–1050.
  • Dawood ET, Ramli M (2011). High strength characteristics of cement mortar reinforced with hybrid fibres. Construction and Building Materials, 25, 2240–2247.
  • Dawood ET, Ramli M (2012). Mechanical properties of high strength flowing concrete with hybrid fibers. Construction and Building Materials, 28(1), 193-200.
  • Gwo-Hshiung, T, Jih-Jeng H (2011). Multiple Attribute Decision Making: Methods and Applications. Taylor and Francis Group, LLC, Boca Raton, FL, 69-76.
  • Haber ZB, Mackie KR, Zhao L (2012). Mechanical and environmental loading of concrete beams strengthened with epoxy and polyurethane matrix carbon fiber laminates. Construction and Building Materials, 26, 604–612.
  • Hsie M, Tu C, Song PS (2008). Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Materials Science and Engineering, 494(1), 153-157.
  • Izaguirre A, Lanas J, Alvarez JI (2011). Effect of a polypropylene fibre on the behaviour of aerial lime-based mortars .Construction and Building Materials, 25, 992–1000.
  • Koksal F, Altum F, Yigit I, Sahin Y (2008). Combined effect of silica fume and steel fiber on the mechanical properties of high strength concretes. Construction and Building Materials, 22(8), 1874-1880.
  • Kuder K, Shah S (2010). Processing of high-performance fiber-reinforced cement based composites. Construction and Building Materials, 24, 181–186.
  • Lawler JS, Wilhelm T, Zampini D, Shah SP (2003). Fracture processes of hybrid fiber-reinforced mortar. Materials and Structures / Matrriaux et Constructions, 36, 197-208.
  • Liu CT, Huang JS (2008). Highly flowable reactive powder mortar as a repair material. Construction and Building Materials, 22(6), 1043– 1050.
  • Mallat A, Alliche A (2011). Mechanical investigation of two fiber-reinforced repair mortars and the repaired system. Construction and Building Materials, 25, 1587–1595.
  • Markovic I, Walraven JC, Van MJ (2003). Self compacting hybrid fiber concrete-mix design, workability and mechanical properties. Proceedings of Third International Symposium on Self-Compacting Concrete, 763-775.
  • Mehta P, Monteiro P (2006). Concrete: Microstructure, Properties, and Materials. Third Edition. McGraw-Hill Inc., New York.
  • Miloud B (2005). Permeability and porosity characteristics of steel fiber reinforced concrete. Asian Journal of Civil Engineering (Building and Housing), 6(4), 317-330.
  • Mohammadi Y, Singh SP, Kaushshik SK (2005). Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state. Construction and Building Materials, 22(5), 956-965.
  • Momtazi AS, Zanoosh RZ (2011). The effects of polypropylene fibers and rubber particles on mechanical properties of cement composite containing rice husk ash. Procedia Engineering, 10, 3608–3615.
  • Mustafa S, Yaman OI (2007). Hybrid fiber reinforced self compacting concrete with a high volume coarse fly ash .Construction and Building Materials, 21, 150–156.
  • Natali A, Manzia S, Bignozzia MC (2011). Novel fiber-reinforced composite materials based on sustainable geopolymer matrix. Procedia Engineering, 21, 1124–1131.
  • Pattnaik RR (2006). Investigation into Compatibility between Repair Material and Substrate Concrete using Experimental and Finite Element Method. Ph.D. thesis, Graduate School of Clemson University.
  • Qureshi LA, Sheikh MI, Sultan T (2013). Effect of mixing fiber cocktail on flexural strength of concrete. Procedia Engineering, 54, 711–719.
  • Qureshia LA, Sheikh MI, Sultan T (2013). Effect of mixing fiber cocktail on flexural strength of concrete. Procedia Engineering, 54, 711–719.
  • Ramezanianpour AA, Jovein HB (2012). Influence of metakaolin as supplementary cementing material on strength and durability of concretes. Construction and Building Materials, 30, 470-479.
  • Sahmaran M, Yurtseven A, Yaman, OI (2005). Workability of hybrid fiber reinforced self-compacting concrete. Building and Environment, 40, 1672–1677.
  • Schueremans L, Cizer Ö, Janssens E, Serré G, Balen KV (2011). Characterization of repair mortars for the assessment of their compatibility in restoration projects: Research and practice. Construction and Building Materials, 25, 4338–4350.
  • Sevil T, Baran M, Bilir T, Canbay E (2011). Use of steel fiber reinforced mortar for seismic strengthening Construction and Building Materials, 25, 892–899.
  • Sivakumar A, Santhanam M (2007). Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres. Cement and Concrete Composites, 29, 603–608.
  • Steffen G, Joost CW (2001). Parameter study on the influence of steel fibers and coarse aggregate content on the fresh properties of self compacting concrete. Cement and Concrete Research, 3, 1793–1798.
  • Sun W, Chen H, Luo X, Qian H (2001). The effect of hybrid fibers and expansive agent on the shrinkage and permeability of high-performance concrete. Cement and Concrete Research, 31, 595–600.
  • Tayeha BA, Abu Bakarb BH, Megat Joharib MA, Vooc YL (2013). Evaluation of bond strength between normal concrete substrate and ultra high performance fiber concrete as a repair material. Procedia Engineering, 54, 554–563.
  • Tien-Chin W, Tsung-Han C (2007). Application of TOPSIS in evaluating initial training aircraft under a fuzzy environment. Expert Systems with Applications, 33, 870-880.
  • Yao W, Lib J, Wu K (2003). Mechanical properties of hybrid fibre reinforced concrete at low fibre volume fraction. Cement and Concrete Research, 33, 27–30.
APA DAWOOD E, GANIM T (2017). Effectiveness of high performance mortar reinforced with fibers as a repair material. , 29 - 47. 10.20528/cjcrl.2017.02.001
Chicago DAWOOD Eethar Thanon,GANIM Tamara Waleed Effectiveness of high performance mortar reinforced with fibers as a repair material. (2017): 29 - 47. 10.20528/cjcrl.2017.02.001
MLA DAWOOD Eethar Thanon,GANIM Tamara Waleed Effectiveness of high performance mortar reinforced with fibers as a repair material. , 2017, ss.29 - 47. 10.20528/cjcrl.2017.02.001
AMA DAWOOD E,GANIM T Effectiveness of high performance mortar reinforced with fibers as a repair material. . 2017; 29 - 47. 10.20528/cjcrl.2017.02.001
Vancouver DAWOOD E,GANIM T Effectiveness of high performance mortar reinforced with fibers as a repair material. . 2017; 29 - 47. 10.20528/cjcrl.2017.02.001
IEEE DAWOOD E,GANIM T "Effectiveness of high performance mortar reinforced with fibers as a repair material." , ss.29 - 47, 2017. 10.20528/cjcrl.2017.02.001
ISNAD DAWOOD, Eethar Thanon - GANIM, Tamara Waleed. "Effectiveness of high performance mortar reinforced with fibers as a repair material". (2017), 29-47. https://doi.org/10.20528/cjcrl.2017.02.001
APA DAWOOD E, GANIM T (2017). Effectiveness of high performance mortar reinforced with fibers as a repair material. Challenge Journal of Concrete Research Letters, 8(2), 29 - 47. 10.20528/cjcrl.2017.02.001
Chicago DAWOOD Eethar Thanon,GANIM Tamara Waleed Effectiveness of high performance mortar reinforced with fibers as a repair material. Challenge Journal of Concrete Research Letters 8, no.2 (2017): 29 - 47. 10.20528/cjcrl.2017.02.001
MLA DAWOOD Eethar Thanon,GANIM Tamara Waleed Effectiveness of high performance mortar reinforced with fibers as a repair material. Challenge Journal of Concrete Research Letters, vol.8, no.2, 2017, ss.29 - 47. 10.20528/cjcrl.2017.02.001
AMA DAWOOD E,GANIM T Effectiveness of high performance mortar reinforced with fibers as a repair material. Challenge Journal of Concrete Research Letters. 2017; 8(2): 29 - 47. 10.20528/cjcrl.2017.02.001
Vancouver DAWOOD E,GANIM T Effectiveness of high performance mortar reinforced with fibers as a repair material. Challenge Journal of Concrete Research Letters. 2017; 8(2): 29 - 47. 10.20528/cjcrl.2017.02.001
IEEE DAWOOD E,GANIM T "Effectiveness of high performance mortar reinforced with fibers as a repair material." Challenge Journal of Concrete Research Letters, 8, ss.29 - 47, 2017. 10.20528/cjcrl.2017.02.001
ISNAD DAWOOD, Eethar Thanon - GANIM, Tamara Waleed. "Effectiveness of high performance mortar reinforced with fibers as a repair material". Challenge Journal of Concrete Research Letters 8/2 (2017), 29-47. https://doi.org/10.20528/cjcrl.2017.02.001
Sayfa Oluşturulma Tarihi
23-04-2024 12:32

İLETİŞİM

TÜBİTAK ULAKBİM TR Dizin

Yüzüncüyıl, İşçi Blokları Mahallesi

Muhsin Yazıcıoğlu Caddesi No:51/C

06530 Çankaya / ANKARA +90 (312) 298 92 00

trdizin@tubitak.gov.tr

TÜBİTAK ULAKBİM Ulusal Akademik Ağ ve Bilgi Merkezi Cahit Arf Bilgi Merkezi © Tüm Hakları Saklıdır. Gizlilik Politikası Kullanım Şartları