Approaches for problem diagnosis via statistical process control charts

BİRGÖREN, BURAK; Koçer, Bülent

Approaches for problem diagnosis via statistical process control charts

Bülent KOÇER, (Selçuk Üniversitesi, Mühendislik Mimarlık Fakültesi, Endüstri Mühendisliği Bölümü, Konya, Türkiye)

Burak BİRGÖREN (Kırıkkale Üniversitesi, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümü, Kırıkkale, Türkiye)

Gazi Üniversitesi Fen Bilimleri Dergisi

1 0

Yıl: 2004 Cilt: 17 Sayı: 4 Sayfa Aralığı: 59 - 69 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022

Approaches for problem diagnosis via statistical process control charts

Öz:

İstatistiksel proses kontrol çizelgeleri, süreci etkileyen özel nedenlerin varlığına işaret eden kontrol-dışı sinyalleri saptamayı amaçlar. Böyle bir sinyal saptandığında bunun yorumlanması, diğer bir deyişle sinyale yol açan gerçek nedenlerin ortaya çıkarılması operatör ya da mühendislerin görevidir. Son zamanlarda bu yorumlama işlemini kolaylaştıracak bazı teknikler geliştirilmiştir. Çalışma, bu teknikleri üç ana başlık altında incelemektedir: geleneksel tek değişkenli kontrol çizelgeleri, yapay sinir ağı uygulamaları ve çok değişkenli kontrol çizelgeleri.

Anahtar Kelime:

İstatistiksel proses kontrol çizelgelerinde hata teşhisine yönelik yaklaşımlar

Öz:

Statistical process control charts aim to detect out-of-control signals which indicate existence of special causes effecting the process. Once such a signal is detected, the interpretation of the signal, that is, discovering the actual causes behind the signal, rests upon the shoulders of operators or engineers. Recently, some techniques have been developed for making this interpretation process easier. This study presents an overview of such techniques in three categories: traditional one-variable control charts, artificial neural network applications and multivariate control charts.

Anahtar Kelime:

Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık

1. Montgomery, D. C., Introduction to Statistical Quality Control 4th ed., Wiley & Sons, New York (2001).
2. Pearson, R. K., "Exploring process data", Journal of Process Control, 11: 179-194 (2001).
3. Western Electric, "Statistical Quality Control Handbook", Western Electric Corporation, Indianapolis, IN (1956).
4. Hoyer, R. W., Ellis, W. C., "A graphical exploration of SPC", Quality Progress, 5: 65-73 (1996).
5. Seder, L. A., "Golden oldies from industrial engineering- diagnosis with diagrams", Quality Engineering, 2: 503-530 (1990).
6. Barton, R. R., Gonzalez-Barreto, D. R., "Process oriented basis representations for multivariate process diagnostics",Quality Engineering, 9: 107-118 (1996).
7. Zaciewski, R. D., Nemeth, L., "The multi-vari chart: an underutilized quality tool", Quality Progress, 81-83(October 1995).
8. Zorriassatine, F., Tannock, J. D. T., "A review of neural networks for statistical process control", Journal of Intelligent Manufacturing, 9: 209-224 (1998).
9. Pugh, G. A. "A comparison of neural networks to SPC charts", Computers & Industrial Engineering, 21: 253-255 (1991).
10.Smith, A. E., "X-bar and R control chart interpretation using neural computing", International Journal of Production Research, 32: 309-320 (1994).
11.Pham, D. T., Öztemel, E., "Control chart pattern recognition using neural networks", Journal of Systems Engineering, 2: 256-262 (1992).
12.Pham, D. T., Öztemel, E., "Control chart pattern recognition using learning vector quantization network",International Journal of Production Research, 32: 721-729 (1994).
13.Guh, R. S., Hsieh, Y. C., "A neural network based model for abnormal pattern recognition of control charts",Computers & Industrial Engineering, 36: 97-108 (1999).
14.Cheng, C. S., "A neural network approach for the analysis of control chart patterns", International Journal of Production Research, 35: 667-697 (1997).
15.Zorriassatine, F., Tannock, J.D.T., O'Brien, C., "Using novelty detection to identify abnormalities caused by mean shifts in bivariate processes" Computers & Industrial Engineering, 44: 385-408 (2003).
16.Hotelling, H., Multivariate quality control, illustrated by the air testing of sample bombsights, in:Techniques of Statistical Analysis, ed. C. Eisenhart, M. W. Hastay and W. A. Wallis, Mc-Graw Hill, New York (1947).
17.Birgören, B., "Multivariate statistical process control for quality diagnostics and applications to process oriented basis representations", Ph.D. Thesis, The Pennsylvania State University, State College, PA (1998).
18.Espada-Colon, H. I., Gonzalez-Barreto, D. R. "Component registration diagnosis for printed circuit boards using process-oriented basis elements", Computers & Industrial Engineering., 33: 389-392 (1997).
19.Singh, R., Gilbreath, G. "A real-time information system for multivariate statistical process control", International Journal of Production Economics, 75: 161-172 (2002).
20.Gong, L., Jwo, W., Tang, K., "Using on-line sensors in statistical process control", Management Science, 43: 1017-1028 (1997).
21.Mason, R. L., Young, J. C., "Multivariate statistical process control with industrial applications", ASA-SIAM,Philadelphia, PA (2001).
22.Bakır, M. A., Karaca, S., "Çok değişkenli kalite kontrol yaklaşımlarının bir değerlendirmesi", İstatistik Araştırma Dergisi, 1: 67-85 (2002).
23.Stoumbos, Z. G., Reynolds, M. R. Jr., Ryan, T. P., Woodall, W. H., "The state of statistical process control as we proceed into the 21st century", Journal of the American Statistical Association, 95: 992-998 (2000).
24.Fuchs, C., Kenett, R. S., Multivariate Quality Control: Theory and Applications, Marcel Dekker, New York (1998).
25.Murphy, B. J., "Selecting out of control variables with the $T^2$ multivariate quality control procedures", The Statistician, 36: 571-583 (1987).
26.Doganaksoy, N., Faltin, F. W., Tucker, W. T., "Identification of out-of-control quality characteristics in a multivariate manufacturing environment", Communication in Statistics - Theory and Methods, 20: 2775-2790 (1991).
27.Mason, R. L., Tracy, N. D., Young, J. C., "Decomposition of $T^2$ for multivariate control chart interpretation",Journal of Quality Technology, 27: 99-108 (1995).
28.Nedumaran, G., Pignatiello, J. J., "Diagnosing signals from $T^2$ and $X^2$ multivariate control charts", Quality Engineering, 10: 657-667 (1998).
29.Birgören, B., "Çok boyutlu kalite kontrolde $T^2$ sinyallerinin Scheffe tipi aralıklarla yorumlanması", İstatistik Sempozyumu 2000 Bildiriler Kitabı, 347-358(2000).
30.Maravelakis, P. E., Bersimis, S., Panaretos, J., S. Psarakis, "Identifying the out of control variable in multivariate control", Communications in Statistics-Theory and Methods, 31: 2391-2408 (2002).
31.Apley, D. W., Lee, H. Y., "Identifying Spatial Variation Patterns in Multivariate Manufacturing Processes: A Blind Separation Approach", Technometrics, 45: 220-234 (2003).
32.Mason, R. L., Chou, Y., Sullivan, J. H. Stoumbos, Z. G., Young, J. C., "Systematic patterns in $T^2$ charts", Journal of Quality Technology, 35: 47-58 (2003).
33.Runger, G. C., Alt, F. B., Montgomery, D. C., "Controlling multiple stream processes with principle components",International Journal of Production Research, 34: 2991-2999 (1996).
34.Kano, M., Hasebe, S., Hashimoto, I., Ohno, H., "A new multivariate statistical process monitoring method using principal component analysis", Computers and Chemical Engineering, 25: 1103-1113 (2001).

APA	Koçer B, BİRGÖREN B (2004). Approaches for problem diagnosis via statistical process control charts. , 59 - 69.
Chicago	Koçer Bülent,BİRGÖREN BURAK Approaches for problem diagnosis via statistical process control charts. (2004): 59 - 69.
MLA	Koçer Bülent,BİRGÖREN BURAK Approaches for problem diagnosis via statistical process control charts. , 2004, ss.59 - 69.
AMA	Koçer B,BİRGÖREN B Approaches for problem diagnosis via statistical process control charts. . 2004; 59 - 69.
Vancouver	Koçer B,BİRGÖREN B Approaches for problem diagnosis via statistical process control charts. . 2004; 59 - 69.
IEEE	Koçer B,BİRGÖREN B "Approaches for problem diagnosis via statistical process control charts." , ss.59 - 69, 2004.
ISNAD	Koçer, Bülent - BİRGÖREN, BURAK. "Approaches for problem diagnosis via statistical process control charts". (2004), 59-69.

APA	Koçer B, BİRGÖREN B (2004). Approaches for problem diagnosis via statistical process control charts. Gazi Üniversitesi Fen Bilimleri Dergisi, 17(4), 59 - 69.
Chicago	Koçer Bülent,BİRGÖREN BURAK Approaches for problem diagnosis via statistical process control charts. Gazi Üniversitesi Fen Bilimleri Dergisi 17, no.4 (2004): 59 - 69.
MLA	Koçer Bülent,BİRGÖREN BURAK Approaches for problem diagnosis via statistical process control charts. Gazi Üniversitesi Fen Bilimleri Dergisi, vol.17, no.4, 2004, ss.59 - 69.
AMA	Koçer B,BİRGÖREN B Approaches for problem diagnosis via statistical process control charts. Gazi Üniversitesi Fen Bilimleri Dergisi. 2004; 17(4): 59 - 69.
Vancouver	Koçer B,BİRGÖREN B Approaches for problem diagnosis via statistical process control charts. Gazi Üniversitesi Fen Bilimleri Dergisi. 2004; 17(4): 59 - 69.
IEEE	Koçer B,BİRGÖREN B "Approaches for problem diagnosis via statistical process control charts." Gazi Üniversitesi Fen Bilimleri Dergisi, 17, ss.59 - 69, 2004.
ISNAD	Koçer, Bülent - BİRGÖREN, BURAK. "Approaches for problem diagnosis via statistical process control charts". Gazi Üniversitesi Fen Bilimleri Dergisi 17/4 (2004), 59-69.