High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool
Yıl: 2005 Cilt: 18 Sayı: 3 Sayfa Aralığı: 453 - 458 Metin Dili: Türkçe İndeks Tarihi: 29-07-2022
High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool
Öz: Bu çalışmada, 35 HRC ve 62 HRC sertliğindeki AISI D3 soğuk iş takım çeliğinin CBN kesici takımlar ile işlenmesinde, yüzey kalitesi ve yanal yüzey aşınma değerlerinin karşılaştırması yapılmıştır. Kesici takım performansı kesici ömrü ve iş parçasının yüzey kalitesine göre değerlendirilmiştir. Ayrıca, işlenen malzeme sertliğinin kesici ömrü ve iş yüzey kalitesine etkisi tartışılmıştır.
Anahtar Kelime: Sertleştirilmiş AISI D3 takım çeliğinin CBN parmak freze ile yüksek hızda işlenmesi
Öz: In this work, high speed end milling of AISI D3 cold-work tool steel hardened to 35 HRC and 62 HRC was investigated using CBN cutting tools. Cutting tool performance was studied with respect to tool life and surface finish of the workpiece. The effect of material hardness on the tool wear and surface roughness was also discussed.
Anahtar Kelime: Belge Türü: Makale Makale Türü: Araştırma Makalesi Erişim Türü: Erişime Açık
- 1.Z. Q. Liu, X. Ai, H. Zhang, Z. T. Wang and Y. Wan, "Wear patterns and mechanisms of cutting tools in high-speed face milling", Journal of Materials Processing Technology, 129, (1-3), 222-226, (2002). 2.P. Koshy, R.C. Dewes, D.K. Aspinwall, "High speed end milling of hardened AISI D2 tool steel (-58 HRC)", Journal of Material Processing Technology, 127, 266-273, (2002). 3.T. Nakagawa, T. Ikeda, T. Matsuoka, "High speed milling of steel and tool life", in: Proc. 8th Int. Conf. Tool, Die and Mold Industry, Barcelona, Spain, (1995). 4.Nieminen, J. Paro, V. Kauppinen, "High-speed milling of advanced materials", Journal of Material Processing Technology, 56, 24-36, (1996). 5.P. Fallböhmer, C.A. Rodriguez, T. Özel, T. Altan, "High-speed machining of cast iron and alloy steels for die and mold manufacturing", Journal of Material Processing Technology, 98,104-115, (2000). 6.H. Coldwell, R. Woods, M. Paul, P. Koshy, R. Dewes, D. Aspinwall, "Rapid machining of hardened AISI HI3 and D2 moulds, dies and press tools"', Journal of Material Processing Technology, 135, 301-311, (2003). 7.P. Koshy, R. Dewes, D. Aspinwall, "High speed end milling of hardened AISI D2 steel", in: Proceedings of the International Conference on Precision Engineering, Singapore, pp 461,476, (2000). 8.Y.K. Chou, C.J. Evans, M.M. Barash, "Experimental investigation on CBN turning of hardened AISI 52100 steel", Journal of Material Processing Technology 124, 274-283, (2002).
| APA | ASLAN E, CAMUŞCU N (2005). High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. , 453 - 458. |
| Chicago | ASLAN E.,CAMUŞCU N. High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. (2005): 453 - 458. |
| MLA | ASLAN E.,CAMUŞCU N. High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. , 2005, ss.453 - 458. |
| AMA | ASLAN E,CAMUŞCU N High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. . 2005; 453 - 458. |
| Vancouver | ASLAN E,CAMUŞCU N High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. . 2005; 453 - 458. |
| IEEE | ASLAN E,CAMUŞCU N "High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool." , ss.453 - 458, 2005. |
| ISNAD | ASLAN, E. - CAMUŞCU, N.. "High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool". (2005), 453-458. |
| APA | ASLAN E, CAMUŞCU N (2005). High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. Gazi Üniversitesi Fen Bilimleri Dergisi, 18(3), 453 - 458. |
| Chicago | ASLAN E.,CAMUŞCU N. High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. Gazi Üniversitesi Fen Bilimleri Dergisi 18, no.3 (2005): 453 - 458. |
| MLA | ASLAN E.,CAMUŞCU N. High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. Gazi Üniversitesi Fen Bilimleri Dergisi, vol.18, no.3, 2005, ss.453 - 458. |
| AMA | ASLAN E,CAMUŞCU N High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. Gazi Üniversitesi Fen Bilimleri Dergisi. 2005; 18(3): 453 - 458. |
| Vancouver | ASLAN E,CAMUŞCU N High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool. Gazi Üniversitesi Fen Bilimleri Dergisi. 2005; 18(3): 453 - 458. |
| IEEE | ASLAN E,CAMUŞCU N "High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool." Gazi Üniversitesi Fen Bilimleri Dergisi, 18, ss.453 - 458, 2005. |
| ISNAD | ASLAN, E. - CAMUŞCU, N.. "High speed end milling of hardened AISI D3 cold work tool steel with CBN cutting tool". Gazi Üniversitesi Fen Bilimleri Dergisi 18/3 (2005), 453-458. |
