Betonarme çerçeve yapısal sistemlerin özel geometrili ve yüksek dayanımlı beton bloklar ile güçlendirilmesi

POLAT ,Uğur; YAMAN ,İsmail Özgür

Proje Yürütücüsü:

Uğur POLAT

(ODTÜ İnşaat Müh Bölümü, Ankara, Türkiye)

İsmail Özgür YAMAN

(ODTÜ İnşaat Müh Bölümü, Ankara, Türkiye)

Proje Grubu: TÜBİTAK MAG ProjeSayfa Sayısı: 74Proje No: 107M633Proje Bitiş Tarihi: 01.10.2008Metin Dili: Türkçe

0 0

Türkçe

Betonarme çerçeve yapısal sistemlerin özel geometrili ve yüksek dayanımlı beton bloklar ile güçlendirilmesi

Öz:

ALTIN, S., “Strengthening of Reinforced Concrete Frames with Reinforced Concrete Infills”, A Doctor of Philosophy Thesis in Civil Engineering, Middle East Technical University, Ankara, (1990).
ALTIN, S., Ersoy, U., Tankut, T., “Seismic Strengthening of Reinforced Concrete Frames with Reinforced Concrete Infills”, Report No. METU/SML-90/01, Ankara, Turkey, June, (1990).
BARAN, M., “Precast Concrete Panel Reinforced Infill Walls for Seismic Strengthening of Reinforced Concrete Framed Structures”, A Doctor of Philosophy Thesis in Civil Engineering, Middle East Technical University, Ankara, (2005).
ERDEM, Đ., Akyüz, U., Ersoy, U., Özcebe, G., “An Experimental Study On Two Different Strengthening Techniques For RC Frames”, Engineering Structures, 28, (2006), 1843-1851.
ERSOY, U., Uzsoy, S., “The Behavior and Strength of Infilled Specimens”, Report No.MAG-205, TUBITAK, Ankara, Turkey, (1971), In Turkish.
FROSCH, R.J., Li, W., Jirsa, J.O., and Kreger, M.E., “Retrofit of Non-Ductile Moment-Resisting Frames Using Precast Infill Wall Panels”, Earthquake Spectra, Volume 12, Issue 4, November (1996), pp. 741-760
GAREVSKI, M., Hristovski, V., Stojmanovska, M., “Shaking Table Tests of Scaled RC Frame Models for Investigation of Validity and Applicability of Different Retrofitting Techniques”, Advances in Earthquake Engineering for Urban Risk Reduction, Netherlands, (2006), 441-453.
GOEL, S.C, Lee, H., “Seismic Strengthening of R.C Structures by Ductile Steel Bracing System”, Proc. of Fourth U.S National Congress on Earthquake Engineering, EERI, Vol.3, p.323-331, Palm Springs, California, May (1990).
GOVINDAN, P., Lakshmipathy, M., Santhakumar, A. R., “Ductility of Infilled Frames”. Journal of the American Concrete Institute, 83, (1986), pp.567-576.
KAHN, L. F., Hanson, R. D., “Infilled Walls for Earthquake Strengthening”, Proc. of the ASCE, Vol. 105, No. ST2, February, (1979), pp. 283-296.
KARA, M. E., “Strengthening of Non-Ductile Reinforced Concrete Frames By Reinforced Concrete Partial Infills”, A Doctor of Philosophy Thesis in Civil Engineering, Gazi University, Ankara, (2006).
KESNER, K., Billington, S. L., “Investigation of Infill Panels Made from Engineered Cementitious Composites for Seismic Strengthening and Retrofit”. Journal of Structural Engineering, 131, (2005), pp.1712-1720.
MAHERI, M.R., Sahebi, A., “Use of Steel Bracing in Reinforced Concrete Frames”, Engineering Structures, Vol.19, No.12, (1997), pp.1018-1024.
ÖZCEBE, G., Ersoy, U.., Tankut, T., “Strengthening of Brick-Infilled RC Frames with CFRP”, Structural Engineering Research Unit, TÜBĐTAK, METU, Ankara, March (2003).
PHAN, L.T., Todd, D.R., Lew, H.S., “Strengthening Methodology for Lightly Reinforced Concrete Frames”, NISTIR 5128; 108 p. February (1993).
SUGANO S., Fujimura, M., “Aseismic Strengthening of Existing Reinforced Concrete Building”, Proceedings of Seventh WCEE, Vol.4, p.449-456, Istanbul, Turkey, (1980)
SÜSOY, M., “Seismic Strengthening of Masonry Infilled Reinforced Concrete Frames With Precast Concrete Panels”, A Master of Science Thesis in Civil Engineering, Middle East Technical University, Ankara, (2004).
YÜKSEL, E., Đlki A., Erol, G., Demir, C., Karadoğan, H. F., “Seismic Retrofit of Infilled Reinforced Concrete Frames with CFRP Composites”, Advances in Earthquake Engineering for Urban Risk Reduction, Netherlands, (2006), pp.285-300.
YÜZÜGÜLLÜ, Ö., “Depremden Hasar Görmüs Betonarme Çerçevelerin Prefabrik Parçalı Perde Elemanlarıyla Takviyesi”, TÜBĐTAK, Proje No. MAG-494, Ankara, Turkey, (1979).