Zeynep TAŞLIÇUKUR ÖZTÜRK

ORCID: 0000-0002-8253-8159

0

Makale Sayısı

3

Proje Sayısı

0

Aldığı Atıf Sayısı

0

h-index

0

Kendine Atıf Sayısı

0

Kendine Atıf Oranı(%)

0,00

Yayın ve Atıf Sayıları

Kurum İşbirliği

Kurum	Yayın Sayısı
MİLLİ SAVUNMA ÜNİVERSİTESİ	2
İSTANBUL GEDİK ÜNİVERSİTESİ	2
TÜRKİYE	1
YILDIZ TEKNİK ÜNİVERSİTESİ	1

Yazar İş birliği - Yazarlar

Sırala:


1. Tribological Properties of Ti6Al4V Alloy After Shot Peening Process Zeynep TAŞLIÇUKUR ÖZTÜRK , Oğuzhan SEZER Zeynep TAŞLIÇUKUR ÖZTÜRK , Oğuzhan SEZER Gemi ve Deniz Teknolojisi Yıl: 2021 Cilt: 27 Sayı: 219 Sayfa Aralığı: 96 - 106 Doküman Tipi: Makale ÖZ This paper aims to investigate the microstructure and wear properties of Ti6Al4V induced by shot peening. Shot peening process has been used in order to improve the surface and frictional properties of materials, and also used to develop the compressive residual stress layer and enhance the mechanical properties of Ti6Al4V alloy. A pin on disc tribometer is used to carry out the wear test in Ti6Al4V material before and after shot peening. The effects of surface roughness, microstructure hardening induced by shot peening on the tribological properties of Ti6Al4V alloy are evaluated.
2. Sintering of Seydişehir Alumina from Sol Gel Method with TiO2 Addition Zeynep TAŞLIÇUKUR ÖZTÜRK , Selin ENGÜRLÜ , Nilgün KUŞKONMAZ Zeynep TAŞLIÇUKUR ÖZTÜRK , Selin ENGÜRLÜ , Nilgün KUŞKONMAZ International journal of advances in engineering and pure sciences (Online) Yıl: 2020 Cilt: 32 Sayı: 2 Sayfa Aralığı: 192 - 196 Doküman Tipi: Makale ÖZ In this study, we report the sinterability of Seydişehir α-Al2O3 by coating TiO2 colloidal particles by sol-gel method. In thiscontext, efforts have been made to decrease the amount of impurities with washing process, to stabilize transformation withcalcination and to reduce grain size by jet-mill grinding. It is aimed to increase the density of Al2O3 by coating TiO2 by sol-gelmethod. The ceramic powders were dry-pressed, they were sintered at 15800C for different hours(1h, 3h and 6h). The role ofTiO2 content and sintering time on the microstructural properties and density of final products were investigated.
3. INVESTIGATION OF MECHANICAL PROPERTIES OF WELDING ELECTRODES USED FOR HIGH STRENGTH LOW ALLOY STEELS Zeynep TAŞLIÇUKUR ÖZTÜRK , Abdullah Koray PEHLİVAN Zeynep TAŞLIÇUKUR ÖZTÜRK , Abdullah Koray PEHLİVAN Journal of Naval Sciences and Engineering Yıl: 2020 Cilt: 16 Sayı: 2 Sayfa Aralığı: 171 - 192 Doküman Tipi: Makale ÖZ In this study, GeKa Tempo B65 electrodes are used in the welding of highstrength low alloy (HSLA) S355JR steel. It is aimed to increase the impactresistance of the electrodes at minus temperatures. In order to observe themechanical properties of the materials, tensile, impact energy test andCTOD test are performed. Implicit electric arc welding is chosen as thewelding method. Electrodes with three different compositions and grainstructures are prepared for welding. Optical microscope is used to observethe surface images of the weld seams. It is observed that the grain structureof the sample, the amount of alloying elements and the heat input during thewelding of the sample significantly affect the impact resistance of thewelded samples.